Tip through the headphones is a game changer. Thanks🤙🏿

Great explanation! So easy to understand & follow directions. Thank you so much for you videos. Awesome!

Learned a lot, thank you!

Ur a Genius bro i was lookn all over for this ideal info nobody gives a better than u i lately got my subs and my subs require more gain or volume than my fullrange speaker ....so i had wanted to get a seperate control over my subs ,rather than to use a jumper cable from the tops to the subs vs,vs with ur info all i have to do now is get myself a speaker cable and run seperate to subs from cntrl room output channel thank u bro👍👍

I appreciate your help. So if my sub has left and right inputs should I run 2 separate unbalanced trs to xlr or 2 balanced trs to xlr from my mixer?

Thank you Robin , great video!!

Great video! I have a Polk sub. RCA/Aux inputs in the back. Is it possible to have my active speakers and sub as a crossover, where my active is mids and Hi’s my sub just lows? Via headphone jack or a non mic channel like a 3 or 4 channel? I have a Mackie VLZ -402 mixer. One set of main output. Thank you

Thank you sir 👍 I have a question for you. Can you upload a video of how to set up pioneer CDJ 200 , not 2000 with serato, traktor or rekordbox. Apparently the CDJ has to be time coded and Ime just wondering how to do this !! Thank you very much sir in advance. 👍

straight to the point, great

Thank you for the tips

thanks...it worked perfectly!

Hi Robin, I am using a Yamaha MG16XU mixer for my band and my Roland drum kit. I am using the group out 1-2 for my drums so I can get a stereo output and the drums won't come out through the mains unless I need them to. I have the mixer paired to a Harbinger S12 sub and then out to two VARI 2312s so I can take advantage of the crossover function on the S12. All in all I am happy with the sound I am just curious what cables I should be using to connect the group outs to the two inputs on the subwoofer? I am currently using XLR cables with XLR to 1/4" adapters.

Can you sometimes show some mixer stands thank you for explaining how to use mixer plugins that is helpful God bless🙏

hi. I see that you are a professional and I have a question. I have a xenix 1002fx mixer, an active subwoofer vq1500d and an active speaker b212d, all from behringer. what cables should I use and where should I get the audio signal from the mixer to have separate control over each of the two above. thanks for the help. I dont understand verry well what you say,sorry.thanks a lot.

Can I also connect the the subwoofer to a channel on a mixer?

Hi sir, question. if i will buy rockville RPM870 Powered Mixer, where should i put/plug - in the Rockville 2x RBG 15" DSP Powered Subwoofers? And do you think the mixer will handle enough the subs.? Thank you in advance.

Thanks for the concise tutorial. So do I understand correctly that it is safe to connect an active sub-woofer to a mixer-amp monitor out, when it does not have a dedicated output jack for a subwoofer?

What splitter do i need for wire jvc stero speakers to mixer

Hello, enjoy your vids..I know this is old but any experience hooking up a subwoofer with the Mackie VLZ4 Series 802VLZ4 8-Channel Ultra? Thanks

Great video

Thank you for the sharing. grateful to share on the ways to connect a eurolive e1800x subwoofer either in the passive or bi-amp mode, having only the speakon and no other entry. Thnx again

Can i use an unbalanced 1/4 inch from mono to sub or does it have to be TRS balanced? Thank you

appreciate this video bro.

wow . thank you so much .

Hi I have a ddj sb3 controller I need to hook it up to a house receiver passive speaker and laptop visual step by step thank u

Thank you for a good explanation. Just a question,how can I connected my powered subwoofer to the mixer or from the mixer to the subwoofer. I got Alto Mixer 1202.

i have a yamaha MG24 mixer that has a STmono out next to the mains with a control slider, my velodyne sub only has RCA in's, how can i safely go from balanced XLR to the RCA on the sub ?? i read some places to jump pin 1 and 3 with 2 as signal and other places say only 1 sleeve and 2 signal.. very confusing

Can you use TRS dual XLR to connect to Sub from headphone output?

Could you tell me the best way to set volume and master controls when you are using two mixers (Pioneer RX2 & Bose T8S). I have a master and volume control on the Pioneer XDJ RX2 which is then connected to the Pioneer Bose T8S which also has a volume and master control? The T8S then goes to powered speakers.

So I can run my subs from my pyle 83bt with trs to mono l and r out to my sub via xlr balanced?

Awesome tips and well presented in an easy way. Thankyou👍💯

Run the sub through the mackie fx send?

What would the best way to hook up my ekx 18 sp subwoofers to my yamaha 12u mixer. Please help

this video should about cables :). I lost focus on how to connect subwoofer

Can you post a link for the cool tabletop mixer stand you are using on the bigger mixer? Please and thank you.

I have a mackie pro fx16v2 and am looking for an aux send for my powered subwoofers so that I have control of them separate from my mains. How do I do that with this board? I want the lows from all channels to process lows through the subwoofers. It would also be great to not have the kick drum slap through my mains if you can help me with that. Thanks

whats the best value for money subwoofer; modern, lightweight, small foot print, etc; with decent power and good bass to play Reggae and Soul etc; EV, FBT, Mackie, RCF etc? HELP PLEASE!

Hi there, thank you for the awesome video. Can you pls give me the link for the desktop stand for the Mackie Mixer?

Hello! How do I hook up the ZOOM L8 to Harbinger VARI V2315 15''

Yes thank you for the tip..subwoofer connect to headphone

How do you connect a controller to the mixer?

I asked about this on another video. I wanted a to have a separate channel for subwoofers. I have just bought a Mackie FX12v3. It has a sub out. Can I use the sub outs and control the sub sound using the Sub slider?

I still don’t understand if you should connect a sub first or the main speakers first and then the sub? I have a DJ pioneer controller mixer that has XLR and I usually connected to my main speakers first then to the subwoofer and it seems to work that way as well. It seems to work both ways but is there a proper way?

i have a mixer board , to top speakers and a sub woofer , so how do i get the sub to come through both speakers ? How do i set that up ?

I have a Behringer Xenyx X2442USB. How can I connect my EV-ELX200-12PS active Subwoofer to the Behringer. Thank you

I have a pair of mls 900 how do I hook a non powered mixer to the speakers

Dear Robin, I can't hear my (or rather the output is very low) 800 watts RMS PA subwoofer when it is run directly from DENON DJ MIXER (45watts), hwoever my 200 watts RMS 2 -way PA speakers run fine from the DJ MIXER , ......the subwoofer will run now problems out of my computer external audio interface , and is very powerful ....do I need to setup a stage mixer as an intermediate from my DJ MIXER ? and plug the subwoofer in to that? many thanks Jonny

so is there no need to EQ the aux channel? like, roll all top end off? i have a 2nd mixer, would it be an idea to run the aux channel though it and eq there? or should I say fuck it and go buy a crossover

Where did the links for your qualified purchases go?

do you have to go from desk to subs then from subs to tops can you do it other way round ?

Hi sir , Just wondering could you pls show me how to connect my karaoke box into that mixer pls thanks

Hello I'm having a problem connecting a Yamaha DXS 18 subwoofer to a Soundcraft 8fx notepad audio mixer. I would like to know how to connect subwoofer to audio mixe4 and also not distorting. My speakers got hot and shutdown. Can you Please help out.

Hey i have a question how do you connect 4 speakers and 2 subwoofers to a mixer??

can a powered sub be connected to a rack mount line mixer?

Hi is it safe to use the headphone output to a active subwoofer?

I have XLR input in my subwoofer. Im gonna use Monitor out. Do i use balanced or unbalanced cable? Edit: My subwoofer says Balanced input so i think i use balanced cable then

Why the subwoofer no sound out? Does this mean the fuse blown out?

Well you show me how to hook up a non powerd mixer and a powered monitor and a powered subwoofer to 2 mls 900 and the blue tooth send diagram please

why do you want stereo to a subwoofer, its a mono module..? My sub dose not have stereo RCA inputs(red/white) only one(black) that should be a mono rca... right? you make me confused... :P

what is that white stand called thats holding the small mixer...thnx

a close up of u using the actual plugs n slots wd b useful cant see it

I'm using an older 500 watt peavey powered mixer with jbl eon615 and 2 15" monitors that are non powered. The mixer helps a ton

Can i use subwoofer in FX Send ?

Hi can i connect a powered subwoofer to a powered mixer? thank you

1:27

Huh? Hmmmm..... Sure! :-))

Connecting your subwoofer to the phone out output is not entirely okay in my opinion, because voltage is different from line outputs

Obviously he doesn't respond to questions...

Not a great explainer

What would the best way to hook up my ekx 18 sp subwoofers to my yamaha 12u mixer. Please help

I have one 4 channel dj mixer with master & booth out (RCA). One pair of powered JBLSRX828sp subs. One pair of JBLSRX835p full range speakers, both with XLR in and out. I want a small sound mixer I can run from my main DJ mixer and plug both the Subs and Tops(full range) speakers into so I can control the volume of both the subs and tops separately. What mixer and cables will I need?

Someone said I can use my Yamaha 400I pa with a subwoofer to play deeper bass. I have a home theatre Yamaha subwoofer with 1 rica input and a power and volume knob.... can I use them together, I need the rca to 1/4 inch