TIPS & TRICKS - Making Custom Hose Line Connectors

Рет қаралды 5,268

Ай бұрын

After receiving a email from one of my subscribers (thanks Jason!) asking how I make my custom braided lines and joints, I thought it would be best answered by making a Tips & Tricks video.
If you guys have ways you set your braided lines ect. please let us know in the comments section...we would love to hear from you!
Anyway hope this video helps...cheers Mark

Пікірлер: 26

@mattdoyle9772 19 күн бұрын

Thanks for a very clear and concise way of tackling scale wiring.. has given me the confidence to go and approach it on my builds now cheers

@robertmassucci1 Күн бұрын

thank you it's a great video. I love that your nails are not manicured

@ckna6739 22 күн бұрын

Thank u for sharing keep on building

@The_Other_Road Ай бұрын

Thanks for the great video. This is a much easier method than the multi-piece units. Which means I will actually do it!

@richmacer2108 Ай бұрын

I'm just in the mental state of working up to do this for the very first time. Your video has been very very helpful and extremely timely. As someone else remarked, please do a video on painting the fittings. Thank you.

@MKCAUTOMODELWORKS Ай бұрын

Hi Rich...Thanks for your comment...For sure a "How to paint anodized metal" is in the works...Good luck with your build...you will definitely need that mental state that's for sure!!! LOL ...cheers Mark

@davidbishop1570 Ай бұрын

Thanks Mike, very helpfull, especially using the hot needle to stop the ends fraying. Per your previous recommendation I have beenbuying the Top Studio hose and joints from Spot Model in Spain. That was the only place that had the black braided lines I needed for the Ferrari 312T3 that I have just finished. Cheers, Dave.

@MKCAUTOMODELWORKS Ай бұрын

Hi Dave, Trust all is well on the (wet) west coast. Yes the needle trick works for me but I have many a burnt finger to show for it! I'm finding its getting very hard to get the products I am used to working with...there are alternatives but can be a little frustrating at times! Not getting Alclad paint comes to mind!...cheers Mark PS please send pics of your latest build...love to see...m

@AlbertD711 Ай бұрын

Some great tips. Thank you.

@THROTTLEPOWER Ай бұрын

Great vid 👍🏁👍

@billyc3772 5 күн бұрын

Great video! One suggestion I'd have is......Could you insert a small dia. piece of solder so it's not flat and would be easier to keep it routed where you wanted it?

@MKCAUTOMODELWORKS 4 күн бұрын

Hello billyc3772...thank you for your comments, much appreciated...not sure what you are asking here...if you could rephrase the question I be happy to help...cheers Mark

@raven9057 Ай бұрын

Thanks mate :)

@CKDezines Ай бұрын

What about leaving a bit of the sprue on the end of the fitting and drilling a hole big enough for that to fit inside of? Obviously, that would require enough space on your part (radiator in this video) to for the bigger hole but it seems like doing that might eliminate some steps and could make for a stronger connection.

@MKCAUTOMODELWORKS Ай бұрын

Hi CKDezines...Yes that's a good point! Something I didn't mention in my video. For sure in some cases you can do with the standard fitting but I have found most of the time I do need to use the custom wire fitting to make things work...cheers Mark

@gerryedwards523 Ай бұрын

Can you do a video of the painting process for these fittings pls. And thanks for the tips about the line inside the braided line, I didn’t know that.

@MKCAUTOMODELWORKS Ай бұрын

Hi Gerry, Thanks for your comment...yes that would be a good video to make for sure...cheers Mark

@TJsModelBench-jb4xt Ай бұрын

Fantastic! I've been an aircraft modeler for most of my modeling life, but I've recently begun building more cars/trucks. I purchased some Detail Masters braided line and compression fittings but haven't tried to use them as yet. Really didn't know how to be honest. This is a great tutorial. I wonder if your Top Studio brand is available in the USA? Peace and love.

@MKCAUTOMODELWORKS Ай бұрын

Hello TJ...Thanks for your comment...Always fun to change it up a bit I think...last year I did buy a wooden ship from Occre (great company service by the way)...never tried before but really love the look of those old sail ships. Only issue is I didn't factor the work involved in the rigging LOL!!! But my love has always been racing cars...Anyway, to answer your question, yes I'm sure you can get Top Studio stuff in the US. Here is the link to there dealers... www.topstudiohobby.com/index.php?route=information/information&information_id=4 Anyway good luck with your build....cheers Mark

@xxavier5369 Ай бұрын

Thank you for this video and great the tip of the needle, on the other hand or does that order your braid?

@MKCAUTOMODELWORKS Ай бұрын

Hello xxavier5369...I'm not sure what your question is...but what I can add, that I didn't put in the video, is when you burn the end of the braided hose lines with the needle it does shrink a little. You need to compensate around half a centimeter for each end...cheers Mark

@xxavier5369 Ай бұрын

@@MKCAUTOMODELWORKS Thank you for the supplement of information, sorry for my English, it is not a language my question was in which store or ordering your fornitures?

@MKCAUTOMODELWORKS Ай бұрын

@@xxavier5369 this might help... www.topstudiohobby.com/index.php?route=information/information&information_id=4

@nytia117 22 күн бұрын

@@xxavier5369Hobby Easy in Hong Kong has the best prices.