More videos. Nice to have you back. Keep it coming

Sweet! Was just watching some your old stuff.

This is great info! I’m in trucking school and wanted to learn about Regrooving tires

Good to see you back!

Nice to see you back! Your videos are great. I've learnt a lot from them.

Thanks for sharing your video was helpful for my self .I appreciated.

Its nice to see you working again man. I learned many things from you bro. Now i own a small flat tire repair shop in mexico south from tx, borther with presidio tx. Keep your videos coming.

Good lesson; and keep them coming, I’ve learnt a lot about tires with your videos Bro!

Good to see you back I’m an owner operator as well keep up the good work Matt M&o tireLLC Las Vegas Nevada

Good too see your back

Very well done. You were very eady to hear and understand. Nice and calm voice.. excellent

I did this for ten years, 9 hours a day 6 days a week. I'm unbelievably fast and precise at this. When I started those guns had push button settings one through four. And the box was grey and the cord for the pistol grip was a lot skinnier. Then they came out with another gray one with the knob like that one and they were only 250 Watts but they still put out plenty of heat. Unless you looked for the absence of wear bars you would not be able to identify that mine had been grooved. Also if you had a nail and ding the blade a little bit you can take a small precision file and touch it up and get a little more use out of the blade. There's a limit to what you can do with the file but it will make it feel perfect again for a while if you didn't ding it up too bad. Also you need to set something up to hold the tire properly. If you cantilever something off the side of a bench like a big board or a pipe and place the tire over it so it's kind of hanging there it makes it a lot easier. I even made an arm on a hinge that swings down and helps hold it into place which you can raise and lower really quick. When you have the tire suspended a few inches off the ground it makes it easy to keep rotating it and make fast progress. Just setting the tire on the ground like that is very inefficient. It would even be better than nothing if you said it inside of a light truck tire that's just laying on the ground that will help hold it into place better.

Hey buddy nice to see u back and making some videos keep them coming

Dude it’s funny to see that some the slang we use at the slang we been using at our shop is somewhere else out there

Glad your back!

Awesome to see another vid, good video on regrovable ties, at work we sell our casings and just get recaps done when we need them, but my father owns two log truck trailers and wondering if buying a regrover would be worth managing 16 tires. Note that he don't sell casings or wants them recapped.

Great video.

great to see you back brother, keep those videos coming and can you please make a video on your impact tool used for removing valve stems please... much thanks all the way from south auckland New Zealand👍🏽👍🏽

Hey man, regresaste, he aprendido mucho de tus vídeos, bienvenido de nuevo.

my old man has an old groover that was sitting in the old stable for probably years. . . So i tried it on some groovables. and it started working right away. But then button 3 stopped heating, then 2, 1, & 4. It could be user error. but i'm wondering what inside may have went, and if it could be replaced.

good. video thank you👏👏

This is really weirdly satisfying

Thanks for returning

At what tread depth do you consider tire regrooving?

Hi Dude Nice to see you again! Is it legal to truck use those tires in US .Im from Brazil and its a violation to roll that in here.

Hey ,if I want it hw can I get it can u help me.and hw much it costs

Great info! Im grooving forklift tires and the issue im running into is, my blades are bending or deforming after 3 or 4 passes. Im guessing it has to do with temperature vs pressure required to make clean cuts. How do you determine the temperature for being effective and not ruining blades. Also, are there different quality or hardness in blades according to what type of tire you're grooving?

Is this safe?

Can i avail that tools for tires regroving

How to deliver this machine

Where do you order your blades from ?

What a price sir???

Is this worth doing for a small fleet? Mostly 4 and 550 4x4s and how do you figure the best depth to go ?

Where are you located bro? Im in NYC ill pay you to train me i want a box truck set up

Where are you located and can I ship tires to be grooved to you please let me know

Does a tire have to say regroovable , to regroove it, or can any tire be regroove.

Is there a tool to remove some nobbies on an off-roader tire (to lighten it and use it for sand)?

God bless u bro

Dónde está este compa

Can the tire after being regroove be vulcanized/retread?

"Per DOT when you regroove you need to be 2/32 above the steel casing." Ok, but how can you tell how deep to go?

Still Alive!!! 👍🏼

Fuck yeah! hatters keep it coming! I subscribed on your positive attitude. Grant Cardone says "Get you some haters if you ain't got any"

i want bey it pleas tell me where that

I want to be a tire guy one day man

8:26 you are saying "you can whatever you want" which is not right. You ought to regroove tires according to the instruction given by the manufacturer. This can be found in the tires catalogues. If you do whatever you want you can damage the tire and it will never be able to carry as much load as designed, not to mention the safety.

I need know how much is this machine hong hong dollars

I have never heard of regrooving

How can I buy this machine

I do this to my $30 steel toe boots from Wal-Mart

Hola soy de chile

where are you from, sir?

Where can bbn I get you email at?

Can you turn up your audio next time, i can barely hear you.

I use homemade tool 🙈

Can't hear you!

Volume....

Now I know why tire blows up

Next time please speak louder or keep the mic near.can hardly hear you.

Regroovable and made in China should not be on the same tire

U need to speak up bro i could barely hear you!

Nice, just the volume is to low, maybe it's my damm beats or talk louder perrito....cool videos.

Shame about audio

Need to talk little louder next time

speak up

get a mic omg

Wow that's a lot of work to scam someone out of $30 bucks for a used tire

Mannn how much more can you talk

You need to go to the dentist immediately your teeth are revolting