18 just graduated highschool last year I joined an apprenticeship program at an aerospace job shop at 16 never having much desire to go to university despite being in honors and ap classes all through highschool. I’ve absolutely fallen in love with the industry and a big part of that is thanks to people like you guys
@BuschLightMatters69 Жыл бұрын
No one cares
@zeitgeist2720 Жыл бұрын
@@BuschLightMatters69 loser hater
@monfbull2015 Жыл бұрын
@@BuschLightMatters69 💀
@jakeaustin901 Жыл бұрын
Don't listen to @@BuschLightMatters69 Keep that up my man. He's probably typing it in his parents' basement.
@mehmettemel8725 Жыл бұрын
@@BuschLightMatters69 Then why did you read it and commented?
@alan.macrae Жыл бұрын
Another very informative video for those of us non-machinists. The only machining I've ever done was in HS, decades ago. These videos of the work you do are amazing.
@TITANSofCNC Жыл бұрын
Thanks Alan… Have a a great day. Titan
@davidzizelman20619 ай бұрын
@@TITANSofCNC the insert in the video, is that the 432 medium versatile? We’re having a hard time with 1026 hot form tubing material. If these are still able to be purchased at $6 per I’d love to try them out. I believe I signed up for cncexpert a while back, I think.
@Joe___R Жыл бұрын
It is always nice to watch you guys push your tooling and machines to their max. Most shops are afraid to run parts as fast as their machines can go. You guys do it regularly and still maintain the highest quality standards possible. Every shop could take some lessons from you on how to run a successful machine shop and do it while making the most advanced parts in the industry.
@Vankel83 Жыл бұрын
That cutting was pretty impressive. Hat's off to Kennametal for providing a really good insert.
@wendull811 Жыл бұрын
I remember when seco and all insert companies had black coated inserts and the whole machine trade complained that it was to hard to see the edge wear and reading the insert. So they switched to a silver or gold coated instead.
@user-dl4oo9qz2d Жыл бұрын
I was using tips like that in 1995, we faced as first op to save Damage from the irregular cuts
@i3l4ckskillzz79 Жыл бұрын
He did it for a reason.
@jasonbaker5929 Жыл бұрын
I love watching your videos and they are very informative. I have been machining for nearly 30 years and this isn't what I would consider heavy turning. I have run some of the largest lathes around my area. Heavy turning I did was .625 DOC or greater at feed rate of up to .063 IPR.
@shaundemello870511 ай бұрын
It's a puma. Pretty sure the torque isn't there for the deeper cuts.
@W4LNUSS Жыл бұрын
I ran a Tungaloy insert(CNMG120408-TM_T9225)(~7,5€) in 1.7131(5115) a few weeks ago with 280m/min 7mmDOC and 0.48mm/rev on a DMG CTXbeta800. To be fair I was using regular 10Bar floodcoolant.
@user-dn5ue7je5n6 ай бұрын
Для твоих параметров лучше стружколом TH и радиус пластины 1.2...
@kylejanice2191 Жыл бұрын
Working previously in a CNC shop the only tooling we used was kennametal and sandvik coromant keep up the good work !
@Baby_J1 Жыл бұрын
Did you notice a difference in the Kennametal inserts vs the Sandvik inserts?
@brianroby8214 Жыл бұрын
Tried this type of machining on a 4 axis Okuma LC20M approx 33 years ago. The only difference being that the Upper and Lower tools are exactly 180° apart, so I got to thinking if I precisley set the Z tool offset so that both tools were at the same posn on Z at all times I could "Double" the feedrate! Effective feedrate on each tool was only 50% of the actual programmed feedrate. Okuma allowes you to use "P" codes to keep both turrets synchronised at all times. Insane productivity! If the Z offsets were not exact, this would result in the "Leading" turret taking a heavier feedrate, so you had to make sure that you checked this.
@Arthur-ue5vz Жыл бұрын
Now that's a killer insert! Steel doesn't have a chance against this insert! What an impressive piece of modern genius driven engineering! $6 for this beast insert - that's insane! .... and it's indexable! That's crazy! I don't see how you could possibly keep these in stock - these should be on permanent backorder..... Crazy engineering, crazy price, crazy availability, the world has gone totally mad, nuts, twilight zone stuff! Wow! You guys are lifting up the world of machining for everyone! Thank y'all for what you're doing! It's a good work. Kudos to each and every one of you on the team there in Flower Mound! Thank you!!!! 🙂
@camman945 Жыл бұрын
You guys need to do some videos on turning and milling phenolics, plastics, and other composite materials. Also, should do some videos on tooling geometry and it's applications. Can't really find anything on why certain angles, back grinds, insert styles, rakes, chip breakers, etc are to be used and when in depth other than "this metal, use this rake" Thank you guys. Your channel is awesome. Love from Pittsburgh, PA
@adammiller4879 Жыл бұрын
Iv used these inserts for a long time! They were great, loved using them On 4140 , chips break like butter even at lower feed rates, I typically turned at .040 per rev and faced at .050 for roughing. Kennametal makes the best inserts/ drills, sandvik beats them on endmills
@Baby_J1 Жыл бұрын
Did you notice a difference in the Kennametal inserts vs the Sandvik inserts? Like the ones in video?
@adammiller4879 Жыл бұрын
@@Baby_J1 just the price!😂 sandvik is so expensive. Haven’t really looked too closely at them never noticed how it directs coolant to the tip
@ChrisMaj Жыл бұрын
1045 isn't really some crazy steel to machine. Yes, they use high SFM, but 0.012 IPR isn't impressive, and he basically used two inserts for roughing this piece.
@adammiller4879 Жыл бұрын
@@ChrisMaj yeah I know, they haven’t really pushed their lathes very hard
@scottetling3887 Жыл бұрын
Outstanding video Tyson and Greg and to the entire TOC team. Congratulations and thank you. #Kennametal #KCP25C #TOC
@wyattpond7649 Жыл бұрын
10:30 Tyson’s smile in the corner is hilarious. You should add an operator cam angle
@rollscones7519 Жыл бұрын
Different depth of cuts has moved the notch wear, as you guys know. Love the videos 👌
@toyfoxythemangletangle6306 Жыл бұрын
That definitely was a truly impressive depth of cut😳...man that is so crazy! 🤣
@4418CARLOU Жыл бұрын
I used to do 15 degree approach, 3/8" per side, .032" per rev feed on EN19T shafts on an old DSG centre lathe many years ago. The load meter was around 70%.
@Gbeamon9 Жыл бұрын
loll my shop mainly uses Sandvik, and last week a Kennametal distributor showed up to get us to try these inserts, they aren't bad, just nothing special, we use similar cnmg insert from sandvik that works just fine.
@bobsbillets10 ай бұрын
I think for most shops, what would be the deciding factor, would be what the price of the insert costs. Most inserts today will cut very similar if used for their intended purpose.
@DeamRules Жыл бұрын
Those 5mms on each insert at the end looks crazy. I used to make such parts with a tailstock for safety Keep on guys 👌🏻
@ryanclarke2161 Жыл бұрын
your a total wizard Tyson, keep it up man.
@duwacker16 Жыл бұрын
I love those kcp inserts. In industry I have always referred to them as Oreo's. 650-700sfm you can run them all day without switching corners in some scaly material.
@TheOutbackIndustries Жыл бұрын
My rep brought these inserts by a few weeks ago along with a super secret new endmill. And my lathe guys loves them. About to fill up my ROTOPOInt with them
@llljj9 Жыл бұрын
Was the end mill an 8flute with a new coating?
@TheOutbackIndustries Жыл бұрын
@@llljj9 no, 5 flute that could plunge like a drill. I wasn’t allowed to take any photos. Wrecked some 17-4 cond A
@first25q43 Жыл бұрын
On parts 12 inches or bigger. Was doing that with cemented carbide tool bits. In the late 80s. On a manual monarch lathe.
@gm5957 Жыл бұрын
Those inserts being 6$ a piece actually blew my mind. I have watched few these type channels and always figured these were super expensive
@TITANSofCNC Жыл бұрын
Many are… $6 is almost giving them for free.
@willyharris4199 Жыл бұрын
Yeah these inserts are mega cheap, just tried looking at ordering some online but wondering how much shipping is to the UK? It wanted to charge me before I found out shipping charges
@printgymnast368 Жыл бұрын
@@TITANSofCNC We've been using them at my job for a couple weeks now and have been blown away with the price vs. performance compared to our old SECO insets. I was surprised to see a video with the exact same insert
@phillhuddleston9445 Жыл бұрын
@@willyharris4199 I just ordered some and you can see the shipping cost after typing in all the information before clicking the final payment button.
@offuttjr Жыл бұрын
Thanks for all your team does … Thanks .
@HenrikSkov-DK Жыл бұрын
I totally work in the wrong place... 😆 Looks like a fun place to work, pushing the limits 😁
@epictales1307 Жыл бұрын
If I had a CNC machine, you guys would have sold me a handful of these at the least. Nice work on the video. I wish I was able to learn this stuff.
@nickestes1839 Жыл бұрын
They are not just for CNC machines. I bought some for a regular manual lathe.
@bobsbillets10 ай бұрын
I think for most shops, what would be the deciding factor, would be what the price of the insert costs. Most inserts today will cut very similar if used for their intended purpose.
@donniehinske Жыл бұрын
Awesome video Tyson! Luckily I never have to worry about you stealing my material!!!
@smug8461 Жыл бұрын
I use the inserts all the time at work and they will cut even with the edges completely blown off. These things last forever.
@evanhall19 Жыл бұрын
Gonna be using these in 4340 tomorrow with a .150 DOC, curious to see how they do. Our tool rep gave us a bunch to test
@drafty0183 Жыл бұрын
How did it go? We do 4140 quite a bit, so would be interested to know how you went with the 4340.
@evanhall19 Жыл бұрын
@Drafty01 running at 320SFM feeding at .022 DOC .150 it's doing much better than our sumitomo 543 AC8025P EMU! The sumi made 2 parts while the cnmg 543 KC25P made 5, we are using a slightly different chip breaker shown in video. We tried to bump up the sfm but it quickly failed. We are in cut for roughly 16min. Still trying to get things dialed in.
@jjamespacbell10 ай бұрын
When roughing I would always take a depth of cut about 3/4 of the depth of the insert. Never at 1/2 depth of insert as the stresses at the insert hole will cause failure.
@hutchinsoncaraudio9234 Жыл бұрын
I use these inserts they are as good as they say. Significantly longer lasting then my sandvik inserts
@trevorgoforth8963 Жыл бұрын
This video is packed with information, nice work Tyson!
@user-de9hn7nr8k Жыл бұрын
Красавчик, единственный нормальный пацан из титанов, остальным только на рынке пластинами торговать
@Yourmommaluvsme Жыл бұрын
Great job Tyson, those were some nice, satisfying cuts my dude
@artur_daki1682 Жыл бұрын
why dont you do facing first and then rough through the material, so the insert is not hitting the sawn surface at the start of the cut? I think by cleaning it first the insert can hold for much longer
@ryanharsch042 Жыл бұрын
With such a heavy piece of stock it makes sense to balance the weight by OD cutting before running the higher rpm required to face down to center
@artur_daki1682 Жыл бұрын
But those inserts are probably made to stand these factors so maybe you safe yourself time with not doing that right?
@phillhuddleston9445 Жыл бұрын
@@ryanharsch042 True but after you get full cleanup on the od you can then face it and go back to turning the od.
@christophervillalpando1815 Жыл бұрын
Awesome video Tyson! We love to see pinch turning!
@flikflak2410 ай бұрын
12 inch? That's cute That stock will fit in the holes in my parts with space to spare
@highpointsights Жыл бұрын
I worked at a shop in California that made there daily living doing parts (aerospace) that halfdozen other shops refused to bid on!! Several years ago they brought in a slender (stianless I think) maybe .4 diameter in places .125 inothers, 6 or 7 inches long), round part that several other shops had tried runout tolerances of of .0001-.0002. The customer wanted at least he thought it should be ground. This Latino kid (everybody is a kid to me @ 76) turned it on a Hardinge!!! You ought to find him. I can give you his name (I had the guys sign my tool box when I left there )!!!
@brandons9138 Жыл бұрын
Sounds like a cake walk on a Swiss machine.
@joshaugustine4399 ай бұрын
I love you guys and gals over at titan inspiration daily keep it up.
@josechavez3670 Жыл бұрын
Those last cuts were absolutely sexy. Great job Tyson, breaking the rules😊
@emailformosa Жыл бұрын
When you speed up the replay of footage, you should be indicating that with something like, “ x 2 “ in the corner of the video (or something)
@paulscottbaker60425 ай бұрын
My cnc days are over now I use to run a Chiron
@steveanderson4768 Жыл бұрын
That’s an awesome infomercial for those inserts but they do exactly what they say they will do. I’ve never seen a better chips that are damn near the exact same color question will the insert have a little discoloration if you use coolant, they should’ve done that to show or flip it around and show you run in a monster cut with coolant to show no heat discoloration on the insert
@dylatron3000 Жыл бұрын
Man the machine shops i've worked in need to really switch up to Kennametal inserts, they're so durable and thermally resistant and that price, oh man you just can't beat that. Sandvik you better watch out..
@meocats Жыл бұрын
there's a guy on youtube trepaning inconel 1.5 meters deep with sandvik inserts and he shows you how 1 sandvik insert makes for 20 kennametal
@wickedbg Жыл бұрын
sandvik is the best!
@michaeltrilck5680 Жыл бұрын
@@meocats That‘s for shure,mate!!! KM is for „Garage-Hobby-Machining“… SANDVIK is for the pro’s… SANDVIK has the WIDEST Range of Hard Metal Grades , the best coatings and the best cutting Edge geometries… AND the newest Technology in Y - axes turning, i think… And don‘t fortget „PrimeTurning“ programed with „MasterCam 2020“ or newer… And now you understand the Price of 6Dollar‘s per insert…
@DolezalPetr Жыл бұрын
suuuuper nice
@phillhuddleston9445 Жыл бұрын
Very impressive, I would have expected the corner to have started chipping out with running no coolant, at that price it's a no-brainer even for manual laths that aren't running coolant all the time. It seems kind of crazy that you would machine such a large and expensive piece of bar stock just for a video but I guess it makes sales and revenue from video but after just placing an order of steel at around $15K I would hate to waste that much steel just to test and demonstrate a product, too bad you didn't have a part order that could have been used for this test.
@theccieguy Жыл бұрын
Great Job 👍
@swordfish2089 Жыл бұрын
So tell me, how impressed are you with these inserts?
@joejoejoejoejoejoe4391 Жыл бұрын
I still use high speed steel in a lantern tool post, a bit different.
@robertmizek3315 Жыл бұрын
Great content!
@simoniscasesensitive Жыл бұрын
A 13 minute #ad, 5 minutes of my life I won’t get back
@gertkristensen6451 Жыл бұрын
face this part first . yes yes big cut = big brand new machine ..
@unfinishedgamesnDLC8 ай бұрын
C is also Kennametal
@edlooney9625 Жыл бұрын
Nice blue 6 and 9 chips.
@billynomates920 Жыл бұрын
kennametal, i appreciate your engineering but i'm still calling that the gedderdun insert. those cuts were ridiculous!
@idkidk82786 ай бұрын
You guys should do a satisfying video.. With less talking.... With no talking and no people
@LordandGodofYouTube Жыл бұрын
I actually like the dramatic music in your videos as someone learning to make music, but I have always wished someone would put some totally inappropriate music in a video, like sad music for a happy scene, dramatic music for a calm scene, or comedic music for a dramatic scene. I think it would be something different that would make a video memorable.
@urlauberxs Жыл бұрын
thanks
@mehmettemel8725 Жыл бұрын
If it wasn't held in that Schunk chuck I would have been a little nervous.
@MooreCNC Жыл бұрын
Works in a pinch
@shaundemello870511 ай бұрын
I wanna see that on 316SS.
@user-yo9vm1lg2f7 ай бұрын
La lubrification est en option sur les tours à commande numérique
@kransurfing Жыл бұрын
What a crazy price!!
@balooc2 Жыл бұрын
how come you dont have any type of crane in the shop for big parts or moving fixtures around? kinda annoying to make space for a large forklift to do heavier lifting.
@ardennielsen3761 Жыл бұрын
always easy to cut 40'000-60'000psi tensile mild steel.
@florianjungwirth96386 ай бұрын
I wonder why they didn’t use any coolant.
@artcnc8089 Жыл бұрын
the machine is really good what application does it use can you use mastercam?
@philou0187 Жыл бұрын
Nice !
@raymonschepers994 Жыл бұрын
How come i’ve worked with this type of cutting tool tungsten plate 10 years ago. Only they’re fabricated by Sandvik?
@quickfingersmagee1 Жыл бұрын
I about had a stroke at 10:55!!!
@user-lz8vm3xj7n Жыл бұрын
Sandvik is the best !!!!!!!!!!!!!
@andregarel439710 ай бұрын
J'était Technico-Commercial chez Sandvik France département Coromant en 1968 ( Levalois Perret Paris )..........et avions les meilleures plaquettes....Seco moyen..Kenametal moyen..en fait peu de concurence à cette époque.
@3dbarn547 Жыл бұрын
No coolant for filming purposes if you guys didn’t know 😅
@gj91471 Жыл бұрын
Sumitomo is the best on the Planet....
@mattiasarvidsson8522 Жыл бұрын
very short clamping distance, and on the unmachined surface.. It's making me nervous 😅
@Xphinity9 ай бұрын
Jeez man, crashes must cost you so much to repair
@martin309 Жыл бұрын
Steel looking better on the inside...
@fredaraujo6345 Жыл бұрын
Will these also work as good on stainless steel?
@mohamedsalahcnc7910 Жыл бұрын
I want your shirt❤
@bobbg9041 Жыл бұрын
In 1045? That heat treating materials.
@MichaelQShaw Жыл бұрын
Awesome, I’m looking for a machinist to machine the Constant Shifting Center of Gravity Rotor, the Center of Gravity Pendulum MQShawGravity
@extrakid126 ай бұрын
why no coolant?
@twooldfartsinanrv7137 Жыл бұрын
Would like a comparison with other brands. I never let my programmers just SWITCH inserts to a new brand without testing..
@kreeskalay7042 Жыл бұрын
They are sponsored by Kemametal, you won't see other brands unfortunately
@TheHenzen Жыл бұрын
"Depth of cut" counter
@Jeremy-80 Жыл бұрын
I dont know if anyone who knows anything reads these comments and responds like titan himself. But im struggling trying to straight knurl monel fast or even better than 1 a day. I have a non adjustable cnc knurling tool. The clap style i could not figure out on cnc.. Anyone have any tips or tricks?
@wyborowiecpl1031 Жыл бұрын
Thats a thick metal rod
@seimela Жыл бұрын
Can i buy this from you guys in USA and go collect in South Africa Kennametal
@archie3537 Жыл бұрын
What about your chuck pressure?
@TheShannon60 Жыл бұрын
Using coolant would most likely have caused the insert to thermal fracture
@bobsbillets10 ай бұрын
IF the cutting stress is low it would never get hot enough to get to that point. Being that they said multiple times they were not using it for filming, they probably recommend running coolant with this insert. Otherwise, it would have been noted in the video that this was designed to be run without coolant. And, my experience running my cnc lathe is that inserts last longer and produce a better finish running coolant.
@TheShannon6010 ай бұрын
@@bobsbillets that’s fine for finishing, when you are trying to maximize stock removal turn it off and let the heat leave with the chip. Try it, slow down the sfm and turn the feed up. You should always be using different tools for roughing and finishing
@KFrog602 Жыл бұрын
Seeing that with out fluid makes my gums hurt
@user-dn5ue7je5n6 ай бұрын
13 минут рекламы пластин Kena... Где на видео видно безостановочный процесс обработки от начала и до конца.
@grislyregent5227 Жыл бұрын
how would these work on 8620 steel?
@michaelbayer5887 Жыл бұрын
... make the golden Cut 1:1.618.
@tarehjernetarehjerne4082 Жыл бұрын
May I know if Titan’s has tried Walter cutting tools and your experience with them?
@TITANSofCNC Жыл бұрын
I have and they have many great tools.
@legggl8648 Жыл бұрын
In my shop we have Walter tools only for turning, except grooving where we use Horn and Arno, and you can really push these inserts. I was turning a big pipe(OD: 900mm, 4000mm long) and i had to take the outside scale down with one cut, and the machine and inserts just pushed through with a doc of about 10mm, with the weld spiking at about 15mm , a constant 1.1mm per rev feed and 180m/min cutting speed. these Walter inserts are great. One cut took about 45min
@85CEKR Жыл бұрын
Every brand has their place, we do alot of turning at our shop and I would say for ISO turning Walter is definitely superior to kennametal
@ferdywolters6005 Жыл бұрын
Radius On the insert? 1,2mm
@ytfan3815 Жыл бұрын
R = 0.8 mm
@NC-oy8hq Жыл бұрын
Your picture is either wrong , or one of those tools is going to be destroyed.
@user-nc2lw7zp8o Жыл бұрын
Can anyone explain why these Americans don't use refrigeration while cutting metal?
@budisansamuelfabian6233 Жыл бұрын
So why did you not use coolant?
@phillhuddleston9445 Жыл бұрын
Strictly so we could see what's going on in the video.
@budisansamuelfabian6233 Жыл бұрын
@@phillhuddleston9445 no, i think he just forgot to turn it on. He would have told us if was for the video purpose.
@phillhuddleston9445 Жыл бұрын
@@budisansamuelfabian6233 He did mention it in the video.
@doesntmatter3068 Жыл бұрын
Nice sale pitch guys!! Oh and using a Test Indicator on raw scale metal, I was LOL at your stupidity! 【 ͡❛ ͜ʖ ͡❛】