Thank you Mr. Singer. You are the first person that I can understand Auto CAD easily from. You voice, timing, and choice of words make you very easy to comprehend. I will be recommending you to everyone I know!
@jonsmamba66556 жыл бұрын
Debra Berry .,hay ..!
@danielsanders21469 жыл бұрын
would not have completed my project without the help of this video
@autocadwiz41039 жыл бұрын
Thank you very much Tom for a detail step-by-step tutorial. Keep on posting. We really appreciate your effort. Cheers
@arbihirchi11 жыл бұрын
So clean, clear, and simple description... Thank you for this video, it really thought me how to draw a Template, and do my job well. Thank you Mr Tom.
@hlgibson1111 жыл бұрын
This is exactly what I needed to know. I know the video is old but just in case...a great idea for copying and pasting the block would have been to select the lower left corner of the internal border as copy point instead of the external and inserting it into the layout of the other project by using the direct input 0,0
@kenronoh99992 жыл бұрын
Quite easy to follow with details
@trixieeunicegapol45063 жыл бұрын
I love your tutorial! It's precise and easily to understand~
@eduardoaguilar36759 жыл бұрын
wow! so nicely explained! And also, talk about GOOD ENGLISH PRONUNCIATION! amazingly good!
@carlroberts487210 жыл бұрын
Thanks, this was really helpful you filled in the last 10% I was missing!
@daisyq3112 жыл бұрын
I wish you were my autocad professor. Thanks!
@tuvu83947 жыл бұрын
Thank you so much, u save my ass today since my useless teacher can't teach sht. Gotta figure them out all from the internet.
@Facto_maniaa6 жыл бұрын
how to insert 4Mx4M box in A1 size title block . that title block in model not in view port layout .if i reduce scale then box size will reduce also. so my question is that how can i adjust that box in a1title block in model format.. viewport format i cannot use.. please reply ASAP thanks in advance.
@007DTH6 жыл бұрын
Hi Facto Refer to the video from 9:35 on-wards. The title block is copied to the Layout space and adjusted etc. Then delete it from Model space (that was just used to create it). Once back in Layout space, use a new viewport to view your box.
@andyternent16119 жыл бұрын
good tutorial! One thing though, you don't have to try and line up the boundaries when copying titleblock at base point, all you have to do is paste at 0,0 and your don.
@IliasTsipas_plus7 жыл бұрын
Hello, Great video. One question. When I copy my titleblock to the new layout, everything is copied except the text. I also attached a logo and the logo is copied too. Can you suggest something about the text?
@rcote111 жыл бұрын
Finally the info I needed. Thanks!!
@mostirreverent8 жыл бұрын
why if you initially used offset, does the block not fit within the dotted line area?
@balwantjohn65227 жыл бұрын
it is perfect videos for perfect luring
@adriandizon87715 жыл бұрын
When I paste it in the layout it became so small. Please help me how to fix this :(
@CounterStrikeStickerScrapes4 жыл бұрын
hopefully you fixed this but if not try opening the layout tab you want to use and create or select your viewport. Once you do select the drawing you want to use and type CHSPACE (meaning change space) and follow the settings. This should bring in model space drawings at the correct scale.
@GEP81510 жыл бұрын
Really helpful, thank you.
@MissAnqqMusic12 жыл бұрын
Helpful
@audreyanne849311 жыл бұрын
actually i was looking for the finished title block and attributes on the tool bar. . . = wrong search :P i know how to create but dunno where to find the finished one. . . can someone lead me?
@jiwanjack61975 жыл бұрын
Right
@smom3012 жыл бұрын
Thanks that's been really helpful to me :)
@willtolife93239 жыл бұрын
If I use center meter as the unit. Would I still make it 11 by 8.5? or do I have to convert the 11:8.5 inches into center meter?
@juceleganibe68268 жыл бұрын
+GBA Games you have to convert it
@Jamato489110 жыл бұрын
Is there anyway to customize the area of the dashed lines. I made a title block but it doesn't fit in the plot area?
@AMR421RA10 жыл бұрын
The hidden lines will fit around you title block once you modify your title block under Page Set Up Manager. INSTRUCTIONS **Make sure you have copied you title block into layout area before you begin to do this. Don't worry about where it is placed.*** In the Layout area right click on the Layer 1 tab the select Page Set Up Manager. Under Page Set Up Manager click Modify tab. Then under Page Setup select your printer, paper size, then under Plot Area select Window from the drop down menu What To Plot. A tab will appear to the right that says Window, click it. A cursor will appear you want to select the top left corner and the bottom right corner of you title block. Once you have done that the Page Set window will appear again make sure you have Fit to Paper and Center to Plot checked. Then click Ok then Close.
@glaysersepagan50799 жыл бұрын
Hi Sir, i try to follow your tutorial but during using clipboard "Paste" is not highlighted in the layout,
@jaysonrecorte20047 жыл бұрын
Thank you!!! problem solved :)
@shogun117 жыл бұрын
when i right click in the layout it doesnt show that menu, it only shows select base point.
@offrdchic7312 жыл бұрын
Awesome Thank you this helped big time.
@ETH924 жыл бұрын
I can not get over that Americans still use inches. Is there any demand in the US to change to metric?
@rqgravador9 жыл бұрын
thank you very much kind sir...
@kimrbates11 жыл бұрын
Thank you!!!!!!!!!!!!!!!!!
@rayannsun155310 жыл бұрын
very helpful. Thanks!!!!!!!!!!
@tapasyaarchitects51468 жыл бұрын
How to create the same style of layout in portrait format?
@TivanjA11 жыл бұрын
shortcut for rectangle with specified dim @11,8.5
@carloflo10 жыл бұрын
How do I know if I am working with inches, millimeters or meters? And as for the layout paper size it did not came out as almost the exact size to paste. Thanks in advance
@TomSinger19 жыл бұрын
You design in full size units of choice --- Then use the viewport ( scaling) to control the exact scaling of the units to the layout Paper size is also based on the printer you specify in the page setup. so that may have caused the cut off material.
@carloflo9 жыл бұрын
Tom Singer =]
@mohammedafreed57487 жыл бұрын
can I use it for A3 sheet's??
@fatehahjamaludin94598 жыл бұрын
this tutorial,is it fit for an A3 size paper or A4 size paper?
@rosamaycabugayan22597 жыл бұрын
It's probably fit only for bondpaper size :)
@yotin4511 жыл бұрын
thank you i love it
@stevenbacon968011 жыл бұрын
Doesn't work! Copy paste from model space to layout produces nothing for me!
@ArielArroyo80511 жыл бұрын
How about a D size template?
@richardkua44487 жыл бұрын
How would I insert a title block on an existing drawing?
@azharpershiano47907 жыл бұрын
nice question btw... im confused... i have to save my ass... i have to send some samples and i don't know how to create or insert template into existing drawing...
@pauljustinatchico78736 жыл бұрын
XREF
@Mizzblue11able12 жыл бұрын
hanep!
@1MGUNS9 жыл бұрын
GREAT DIMENSTRATION!
@krshailendrabahadur58726 жыл бұрын
Sir please tell me how to do copy paste an object one drawing to another drawing
@pauljustinatchico78736 жыл бұрын
XREF
@cadtemplates51844 жыл бұрын
Download Free Autocad Files : cadtemplates.org
@owaisqarni7178 жыл бұрын
thanks for
@MrRatniProfiter12 жыл бұрын
He has a voice like from some comercial xD
@edgarolson67537 жыл бұрын
Turbo cad setup 2016
@JM-ee5bp4 жыл бұрын
Good Lord take a drink of water
@meghaj4 жыл бұрын
This video also will be helpful to you. (AutoCAD Tutorial) kzfaq.info/get/bejne/edyhf9efrtDYpoU.html