This is the best sawmill on the market, and here's why

Рет қаралды 66,868

Жыл бұрын

This is the best sawmill on the market, and in this video, I go over all the reasons why.
Here's a few videos on the advanced setworks.
how to use:
kzfaq.info/get/bejne/hdCdjNuUtbqziHk.html
emergency procedures:
kzfaq.info/get/bejne/qptkYKelsrS0iKs.html
setworks cutting lots of repetitive cuts:
kzfaq.info/get/bejne/icCkm9inkqempYk.html
video of my last sawmill the Timberking 2000:
kzfaq.info/get/bejne/bquSo9B4nL67j6s.html
channels to check out
Mr.Robert's new channel:
youtube.com/@RRRNeveraDullMoment23
Neal's channel:
youtube.com/@RiversidewoodFarm-vq3bl
The kilted Sawyer:
youtube.com/@thekiltedsawyer

Пікірлер: 50

@darngoodday5933 Жыл бұрын

Nice job going over the mill. Best mill on the market, hands down.

@MrMrkody100 Ай бұрын

Absolutely the best full function portable mill on the market.

@davidpape9726 Жыл бұрын

Great job on going over the design and functions with the pros and cons . I was going to order a TK2020 to replace a 1400 three years ago but opted to upgrade the 1400 with a larger motor, power log turner, power log dog, basic setworks and finally the vertical log stops. It has been well worth the money.

@edwardhurst4069 6 ай бұрын

Excellent information, thank you so much!🙂🍃

@kenashton32 4 ай бұрын

Great video and overview of an awesome mill. TY

@samandtraycewarner4746 Жыл бұрын

My 2020 diesel will be here in August 😊

@OregonOldTimer Жыл бұрын

Thanks for the link to Never a Dull Moment. I just subbed and watched them all.

@thestonespecialist3904 8 ай бұрын

Very informative video. Yes, it was long and I missed the show 😉. But the info was thorough without rambling. I see a sawmill in my future.

@paulharvison3046 Жыл бұрын

The 2020 will be my next mill like yours

@ronnielloyd4514 9 ай бұрын

Most interesting, you could be a salesperson for this machine.

@eriklarsson3188 4 ай бұрын

*salesman. The opposite of saleswoman.

@hannes4918 6 ай бұрын

I have a sawmill with bunks made of a round 30mm steel and all of them are adjustable in the relation of the bed ralils. Never had a problem with sawdust on bunks.

@fisherusac3479 Жыл бұрын

That was my issue as well. The 2020 Saw was 14K higher than the 1620 one I recently received from TimberKing. It works great, but I miss the idea of a few additional hydraulic features, such as the log stops, up and down on the log dog, and the in and out of the blade guard and the Toe Boards. As this is more of a "hobby" saw at this point and one that I am learning on to fully understand the sawing business, it currently fits my needs, but the 2020 TK might be in my future...

@briannapier8337 Жыл бұрын

I would like to see you go over a 1620, I upped my order from a 1400 to the 1620. I agree that the 2020 is tops but price topped me out lol

@SteveHorowski 13 күн бұрын

its too bad that such a cool mill has a joey sippy cup bite me add !!!!! Love the mill (FJB)

@TCSawmills 13 күн бұрын

Yeah, that's a shame. I have no control over what adds youtube puts up. I don't care for politics or politicians.... I like sawmills and the outdoors.

@tiabs 4 ай бұрын

The most amazing feature......"Let me pause real quick and make that dog stop." LOL

@kenashton32 4 ай бұрын

Can you explain direct hydraulics further? Does the direct hydraulics use engine power needed to saw? Meaning reduced power to the blade while using hydraulics?

@paulcaskey8128 Ай бұрын

Does anyone know the difference between the TK2020 and the TK2000? thank you

@TCSawmills Ай бұрын

I have had both a 2000 and a 2020. I also have a video on it kzfaq.info/get/bejne/Z9iVp9SI3NavqoE.html

@JosEPh-zy3yr 5 ай бұрын

I happy you can afford it.

@OfficialHankIII 5 ай бұрын

Has anyone in the states ran any MAHOE MILLS ? Thx for the video

@kenashton32 4 ай бұрын

Have you used or seen performance of the 37hp VTwin gas vs the 24hp diesel. Curious as to the performance difference? $10K extra is tough.

@TCSawmills 4 ай бұрын

I've run my buddy's timberking 2000 with the 37hp. The performance of the gas engine is a bit less than that of the diesel but not much. On larger logs, you kinda chase the RPMs, meaning you limit your cut speed based on the loading of the engine. I don't do that as much on the diesel due to the amount of torque the diesel produces. I'm going off rough numbers in my head, but the gas engine is around 50 ft lbs at around 3,000 rpm, whereas the diesel is at around 78 ft lbs at 2,300 rpm. The other big thing I like about the diesel is that there's a remote start on my operating console. The gas you have to reach up on the engine to choke it and turn the key on and off to start or stop it. That is a little thing, but it is something simple that should be on the operating console, in my opinion. My buddy has cut over 1500 hrs on his gas engine with little to no downtime. But one last thing that popped into my head is fuel economy. On a big job of cutting all day, he will go through 2 tanks of fuel easily, whereas on the diesel, maybe one every 2 days. Again, it's not a huge deal, but he carries a lot of fuel with him on a portable job. Hope this helps.

@kenashton32 4 ай бұрын

Thank you! That is exactly the kind of detail answer I’ve been looking for. Much appreciated.

@carboncopies706 7 ай бұрын

Boy when that wears out i bet you will go crazy always fixing it

@jamesrussell6870 6 ай бұрын

There's a ton of moving parts/electronics after the honeymoon is over..

@mathews0618 8 ай бұрын

Its $60,000 if anyone is curious

@bwillan Жыл бұрын

I hope your sawmills from basic to commercial series doesn't only focus on bandsaw mills. As you know there are other styles of sawmills that work just as well (swing blade, circle, etc). I think TimberKing makes a great sawmill and certainly rivals anything that Woodmizer offers.

@TCSawmills Жыл бұрын

Correct, I talk about circle mills and swing blades, but mostly focus on the portable sawmills. A stationary commercial production mill is the ultimate platform for production

@oliverm5sc Жыл бұрын

TK is years ahead of WM in design, WM needs to get rid of the claw turner, electric over hyd pumps and electric head feed

@misterp158 7 ай бұрын

I did watch this, thanks. then I bought a Cooks.

@randywells4674 7 ай бұрын

How much did timber king give you

@jonijunaidi-cj7xl 7 ай бұрын

Harga somel berapa mas

@randywells4674 7 ай бұрын

Put a tape measure on them

@brinkee7674 7 ай бұрын

What are the chances you would ever bring the mill to the wood? I knew some folks that had every intention of tow mill around but as they said after doing it that it's just so much easier to bring logs to mill as set up is such a PITA. A guy not far from me had a TK 2000 for a while but he sold it and replaced it with a Timber Buddy XP-380 out of PA. Oh my lord the mills are night and day speed wise. The Timber Buddy just chews through wood with it's 120 hp John Deer and none of the emission exhaust/filter. His blades are pricey but they are also big Timber Buddy has only 1 mill but you can customize it how ever you like. There is usually a new one up for auction somewhere. It's made by an Amish guy and they have no website. I saw one last year sell on auction for $60k but $70k would be normal. Set Works, powered tail, pretty much everything 120hp but the thing is BIG and Heavy

@frankshumack7115 7 ай бұрын

Have a 2019 1600. Log turner is the same. Has a hard time on 24" plus logs. Vertical log stops are a plus. Thank goodness you have a diesel. STAY away from kohler

@edsullivan7288 6 ай бұрын

If you are a commercial sawyer, fine, the average 1 man hobbiest can't afford that

@Oldworldranch 5 ай бұрын

He literally said this is for a business

@KY-tp9en 8 ай бұрын

Lt15 for 10k good deal?

@TCSawmills 8 ай бұрын

I think so. Especially in this market. Does it have a lot of wear and tear. I liked mine and learned a lot on it.

@KY-tp9en 8 ай бұрын

@@TCSawmills Very little use, power feed with an extension. Just looked at it and bought it.

@TCSawmills 8 ай бұрын

@KY-tp9en fantastic, you got a good deal. Saw safe and have fun with it. Owing your own sawmill opens up a world of possibilities.

@JahaJaho 2 ай бұрын

What is best? Depends on the price of course, but looking at the specs and the prices I found online I would say you are wrong. Trakmet TTP-600 looks better built, with a lot of german quality components, with a log roller and at a lower price from what I can see. kzfaq.info/get/bejne/mspjjcimma6wdpc.htmlsi=fZVId_8foqBqB0nw