Todco Maintenance & Repair Part 3

Рет қаралды 325,057

12 жыл бұрын

Video from Todco demonstrating how to properly install counterbalance springs, rewind counterbalance springs, and how to correct an improperly wound counterbalance.

Пікірлер: 34

@jordan2x112 2 жыл бұрын

Thank you for the video I’ve been stuck inside a trailer for 5 hours 🚚

@nanigarm Жыл бұрын

Been fighting with a larger version of this system on another trailer. Thankfully the steps worked with some adjustments. I just wanted to say thank you for the video!

@1HSYURIDIA Жыл бұрын

Great video. Easy explanation and safety procedures thank you all

@brianmiranda901 8 жыл бұрын

Thanks you so much for this video. It has saved the day!!!

@rickresendiz1871 7 жыл бұрын

Great video. Turns out I have the exact same model shown in this video. I'm about to get to it. Feel much more confident now.

@hugoalvarado8536 3 жыл бұрын

Very well Explained. Thank you for this kind of videos.

@buzzerd48 11 жыл бұрын

Excellent demonstration video. Thanks for posting!

@TATEXPRESSINC 4 жыл бұрын

Shoutout from TAT Express out of Hutchins, TX

@haroldestrada2078 3 жыл бұрын

Thanks for this perfect explanation I did it the same way you explained and it works perfect.

@millsupply 3 жыл бұрын

Glad to hear it!

@robertogaldamez907 3 жыл бұрын

Excelente vídeo hermano te agradezco mucho buen video......👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍 saludos desde el Salvador

@craigcarpenter825 3 жыл бұрын

thank you. very informative

@TOPDAWGSUAT562 2 жыл бұрын

Damn this is exactly what i needed when my box trucks door gave out while delivering bread at 4am 🤦🏽‍♂️🤦🏽‍♂️ freaken door is heavier than I thought by opening the door manually

@C.O.SBurpees 4 жыл бұрын

Second time watching this lol awesome

@millsupply 4 жыл бұрын

Very glad you've found it helpful!

@phillhuddleston9445 2 жыл бұрын

Two thumbs up! The winding bar on mine has holes for a 3/8" bar, I used 3/4" 18" bars and welded a 3/8" x1" longbar to the ends.

@md123420 6 жыл бұрын

good now i can get back to fixing trailers

@pittsburghjmg4992 7 жыл бұрын

good vid

@richardpaley4241 2 жыл бұрын

When you say turns is it a complete rotation or is it steps with the bar?

@rudyyap5641 9 жыл бұрын

sir, my stock spring was broken and i can't find one. instead of one spring which is 32" inches long, can i use 2 springs 18" each?

@millsupply 9 жыл бұрын

No, you cannot use two 18" springs but we do have a 32" spring in stock. Part No. CB32 which you can find here: www.millsupply.com/CB32.php or you can call us at 800-888-5072

@rudyyap5641 9 жыл бұрын

Mill Supply will you ship in the philippines? how much it cost?

@BTNomad Жыл бұрын

Is there a huge amount of kickback once the set screws are loosened (so the spring can be reset)? I know the bars need to be holding the spring, but I've heard countless people talk about how crazy those springs unwind.

@potatopealer2764 Жыл бұрын

yes, this is why you use the 1/2“ winding bars to unwind the spring too

@gregoryketter9798 2 жыл бұрын

That one you put on a couple weeks ago

@97warlock 7 жыл бұрын

I am quite stumped now,not because of your video, but because....I have to do my Enclosed Trailor today because previous owner took cables off. its the type of door that opens all the way down to the ground & serves as a Ramp also,kinda like what Lawn companies use. ............ Your video says make sure door is in Closed position ...... since My door opens top out to the ground should my door be CLOSED? or Open? to start the procedure? It looks IDENTICLE to the trailor in the video over to the right in the list thats titled " the dreaded ramp repair trailor trash" ... Should the door be layed open to start , or closed to start ?

@terraflata 6 жыл бұрын

You do it with the ramp down. it is the same concept. You want the wires extended while adjusting to prevent the coil from binding

@rosethroop8410 5 жыл бұрын

I have an enclosed trailer where the door is a ramp also . I have two springs do i adjust them one at a time and should the door be down for this also .there also seems to be tension on the roolers when I attach the wires to the door.