Easily Convert an RC Car to BRUSHLESS. Beginners Guide

Рет қаралды 203,856

Күн бұрын

Step By Step Beginners Guide on How to Convert your RC Car to Brushless. If you have any other questions feel free to ask in the comments. Either Myself or my very knowledgable Subscribers will help you. The FTX Zorro is a very good truck for all skill levels! Links to all products used below:
Motor Diameters (Brushed - Brushless)
720 - 40**
550 - 3653+
540 - 3650
380 - 28**
280/370 -24**
00:00 Intro
00:54 Step 1 (Motor)
10:49 Step 2 (ESC)
13:02 Servo
13:59 Receiver
14:48 Switch on & test
16:30 Lipos/Charging
21:00 Bashing!!!
Motor ESC Combo used in this Video:
www.banggood.com/SURPASS-HOBB...
Lower Kv Motor:
www.banggood.com/Surpass-Hobb...
Transmitter & Receiver
www.banggood.com/DumboRC-X4-2...
SkyRC 020 GPS (Speed Meter)
www.banggood.com/SKYRC-GSM020...
The Tools I use (but there are lots of options)
www.banggood.com/YZ-004-4pcs-...
More info on the FTX Zorro:
ftx-rc.com/index.php?_route_=...
Find your local dealer:
www.cmldistribution.co.uk/mod...
Gensace Charger: (UK Plug)
www.gensace.de/gensace-imars-...
Gensace Bashing Series Lipo used:
www.gensace.de/gens-ace-4000m...
My KZfaq Tool: www.tubebuddy.com/youtube000
Facebook: / tomleysgarage
Instagram: / tomleyrc
Twitter: / tomleyrcgarage
Tomley RC © 2021 Tomley Media Ltd. All rights reserved. Publication, reproduction or distribution of this film by any means whatsoever - including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world - is strictly prohibited without the prior written consent of Tomley Media Ltd.

Пікірлер: 430

@danrees5520 3 жыл бұрын

So good to see an rc person treating the car as its meant to be run and not being smashed on the slate park. Thank you tomley rc

@TomleyRC 3 жыл бұрын

Thanks Dan. Now abs again I’ll do a bit of a durability test. But I never really keep going until it’s trashed

@ractogogamez5381 4 ай бұрын

Yea btw bashers exist man thats what theyre meant to do

@dexterbeattie7884 3 жыл бұрын

I really liked the in car and under carriage video.

@TomleyRC 3 жыл бұрын

Yes, it looked cool didn’t it!

@captmcmurphy 2 жыл бұрын

I bought the brushed Zorro as my first more serious RC car. Just did the conversion as shown in the video and it is just awesome! So much fun with endless torque and speed! Thanks a lot for the explanations for the conversion as well as for the LiPo handling. Very valuable content, Sir!!

@TomleyRC 2 жыл бұрын

Thank you, glad it helped you out 😎👍

@cwatson42785 Жыл бұрын

1 to turn, 2 to burn! I'm gonna start using that to tell anyone new to the hobby! I remember always getting confused when I first started what channel was what lol

@sampson4886 Жыл бұрын

I've learned so much from this video I appreciate you matey !

@IDPTheory 3 жыл бұрын

Thank you so much for this. Extremely helpful for me as a beginner to the hobby. Brushless seemed like witchcraft before, now I'm definitely going to give it a go. Your channel is awesome mate, keep it up!

@TomleyRC 3 жыл бұрын

Thanks mate 😎

@semperatis 3 жыл бұрын

I totally agree with you Phil,I want to take my cars back home in one piece,so I don't abuse them either.

@TomleyRC 3 жыл бұрын

Yes, you can still enjoy them without trying to break them

@philiplibby7536 3 жыл бұрын

I like them cheap hex driver sets I haven't had any problems with them tools at all 👍 another good vid as well man keep up the good work

@TomleyRC 3 жыл бұрын

Yeah, for some of the bigger cars, you need to maybe get some slightly better quality ones, but I’ve been using these cheap ones for ages

@semperatis 3 жыл бұрын

I'm still using a 4-in-1 Fastrax set of drivers that I've had for over 12 years,with no signs of wear yet. I got them for working on my Kyosho Inferno,when I used to race.

@RcOffroad9513 3 жыл бұрын

I have the cheap ones and have gone through 3 cheap 2.0 drivers the head rounds out pretty easy, but you can sand the end down to get more life from it. I also have a 2.0 and a 2.5 ball end mip driver and they ae very much superior, but if you are only going to be working on the cheaper wltoys type car the cheaper ones will probably be fine. I do like the higher quality driver for grub screws and I need to get a good 1.5, I have had striped screws that could I later removed easily with a mip 1.5mm, I borrowed from someone. You get what you pay for, but they are good for light work.

@metaljew4456 3 жыл бұрын

Really helpful Tommy. More videos like this are needed. This stuff is easy for you but not for most of us. Thx for the excellent video!

@TomleyRC 3 жыл бұрын

Yes... I think another will be coming soon

@rcboughtandrebuild9269 3 жыл бұрын

That's what RC is all about... To enjoy them running cheap or expensive. That's why I really like your review and your running video. thank you for sharing sir and have a nice day

@TomleyRC 3 жыл бұрын

Thanks Gary. I love all RC's, such a fun hobby

@Dieselboy420 3 жыл бұрын

sick video. i feel more confident now converting my element enduro

@arranshuker 3 жыл бұрын

Bought my first RC car and it arrived yesterday, an FTX Zorro. Love the videos, especially this one as I'm planning on doing a brushless upgrade. Thank you.

@cardona54321 5 ай бұрын

I use a yoga block as a stand for my 1:10 car when working on it. It's stable and dirt cheap

@derricksazrc3411 3 жыл бұрын

Once you go Brushless it truly is an art to finesse the truck/car around without utterly destroying it from the inside out. Your runs were classy. My very first build getting back into RC was a Lunchbox with a Surpass 4300 kv motor and esc. I had no idea what I was getting into lol. It has a Dumborc radio system too. I loved your video man.

@Robzenith601xlb 2 жыл бұрын

Great Video mate. After watching your video I just upgraded to a brushless system in my tamiya plasma edge2. I never knew what size to go for but now I've got a real little ripper on a modest 2s setup. Thanks for the tuition mate. Cheers from Adelaide South Australia.

@viniciusbrito7512 2 жыл бұрын

Thank you so much for sharing your knowledge! You are making things way easier for dudes across the planet. Cheers from Brazil!

@GummiRobbi 3 жыл бұрын

Thank you so much Phil. Your contributions to the RC community are insanely helpful, informative and fun. I'm quite new to the hobby and I've wanted to learn to brushless upgrade for a while and i thought my electrical degree would make it easy. However i found out that this stuff is quite different to what I've been doing at work so I have absolutely no idea as to what I'm doing. Thanks for this very well detailed and helpful video. Soon i'll have a drawer full of brushed motors that i'll have no use for.

@TomleyRC 3 жыл бұрын

You are most welcome dude 😎

@BlueDually4x4 3 жыл бұрын

The onboard shots were great. And I agree with taking care of the vehicles, its no fun waiting for parts all the time.

@shaunescarlett.1 2 жыл бұрын

Another Excellent Video, well explained how to brushless video with bonus material ! Keep up your great work mate 👌🏼👍🏼

@johnerion8691 10 ай бұрын

As a noob to the hobby, there's alot of good solid advice. Really liking your channel.

@craigtaylor2332 3 жыл бұрын

Your quickly becoming my favorite RC channel!! Awesome video for brushless conversations 👌🏼, could you do a video on how to fit new/different rims and tires on an rc, like how to find the right size tires and wheels and what compound and foams are available for different scale rigs. It's sometimes a little overwhelming trying to figure out what wheels and tires fit on certain rigs... thanks and cheers Phil! 🍻

@TomleyRC 3 жыл бұрын

Cheers Craig, really appreciate the support 👍

@rickrogers2649 3 жыл бұрын

As a beginner I really appreciate this video. Thank you for posting. New sub from U.S. Love the channel !

@leirameirarc 3 жыл бұрын

Great beginner´s video there Phil, everything nicely explained and I bet it will help out a lot of people. 👍

@TomleyRC 3 жыл бұрын

Thanks dude

@jakekoninsky5681 2 жыл бұрын

Im not even planning on switching a motor soon but found this video extremely informative, thank you very much.

@enjay6503 Жыл бұрын

A superbly helpful post!Thank you so much for sharing your knowledge and expertise Phil 👍

@dennisnothstein1311 3 жыл бұрын

Thank you so much for the motor size comparison with the brushed and brushless. I have been thinking about doing a brushless conversion on a couple of my cars and I started looking at motors and I had no idea what size motor to get. I always enjoys your videos,entertaining and informative. I hope your move went well,stay safe and have a wonderful day

@TomleyRC 3 жыл бұрын

Thanks Dennis, appreciate it

@bennjewell7917 2 жыл бұрын

Hey TomleyRC. I bought a brushed xlf x03. Got it for $50 so not too disappointed. However, it is sluggish. What brushless motor and ESC combo do you think I should go with?

@joeblincoe3122 Жыл бұрын

I’m never flying again!-hahah. “I promise”. Great video appreciate ya. Nice angles, concise explanation, best vid on the subject for sure. I’m subbed.🔥🔥

@SargeScum 3 жыл бұрын

I have done this many times by now, but I still enjoy the content!

@shannoncold 3 жыл бұрын

A round Ice tray or plastic egg tray is a perfect screw holder/sorter. Awesome videos, thanks!

@jspence3798 3 жыл бұрын

Good advice in this vid Phil. Can’t beat a bit of FTX action. Those shocks are some of the best RTR damping you can get. I use them wherever I can get them to fit and arrma 3s springs if the cars heavy.

@MCsCreations 3 жыл бұрын

Fantastic work, Tomley! The car is MUCH better now! 😃 Stay safe there with your family! 🖖😊

@TomleyRC 3 жыл бұрын

Thanks mate. Certainly woke it up a bit!

@MasterShake300 4 ай бұрын

Thanks man! Learning so much from your videos! I always wantd to get into RC's when i was a kid, but never had the funds. Maybe i'll take the leap some day.

@prismgames 3 жыл бұрын

I really needed this video, I bought a Max 10 Sct for my Arrma Granite yesterday

@andybuk3631 3 жыл бұрын

Looks great and what I will do with my FTX - thanks for posting. Exactly what I was looking for! Cheers

@TomleyRC 3 жыл бұрын

No probs dude

@Del350K4 3 жыл бұрын

What an excellent brushless conversion guide - great stuff!

@TomleyRC 3 жыл бұрын

Thanks Del. Plenty of videos it there... but one to add to the library 😎

@keanermitano477 11 ай бұрын

Wow! Thank you so much for this! Will convert my toy grade 1989 Nikko to a semi-hobby grade. Time to wake up the childhood RC heroes!

@davidives7204 2 жыл бұрын

Brilliant and clear instruction, very inspirational!

@hauntingzero 2 жыл бұрын

This was such a great video with great information! Thank you and please keep making more great videos like this!

@thc2stoned619 3 жыл бұрын

I bought the Zorro after watching your review of it. I was going to buy a brushless motor esc combo tomorrow for it, so the timing of this video is perfect. Thanks for doing what you do :)

@arranshuker 3 жыл бұрын

I've done exactly this, but I ordered a amazon kit and I can't get it to run. I don't know what I'm doing wrong. The motor and esc I have are hobbyfans though, not the same as this one.

@thc2stoned619 3 жыл бұрын

@@arranshuker Sorry to hear that bro, mine should arrive tomorrow, I'll let you know when I get it running. My combo is different also but if you have the right spec motor and esc for your car, it should work ok.

@Axolotl_rcool 2 ай бұрын

Awesome video!!! I'll be doing a brushless swap to a redcat blackout xte very soon!

@mjsrcs3725 3 жыл бұрын

Like the look of that hows it going pal your videos are awesome keep up the good work bud 👍👍👍

@mattreetz3361 Жыл бұрын

Perfect time to see this video again( I rerun alot), the plan is to do similar to my Senton Mega with a 56 f-100 body to play with on road....love the content keep up the good work and thx ...always good for a laugh at least...

@jonlaird5082 3 жыл бұрын

Brushless conversions are awesome. When I had it,I did a 5000kv brushless conversion on my sand scorcher. After upgrading all the gears to metal it hauled serious ass 😂. Though I did have to add a little weight up front to keep it balanced but still was a blast to drive,lol

@ScurvyK1D 3 жыл бұрын

Great video! Best explanation with extra info I've seen,

@dominicchesterman2107 3 жыл бұрын

Respect for this video. Helped me sort my DHK Cage r after the brushed motor lasted about 60 minutes from new.

@TomleyRC 3 жыл бұрын

No probs dude 😎👌

@mgscheue 3 жыл бұрын

A lot of great practical advice. Thank you!

@NeoIsrafil 2 жыл бұрын

I used this same set on my 104001. Its great, perfectly matched IMO.

@nosferatu49426 Жыл бұрын

Very much enjoy the fpv suspension action. Great video. 😀

@roharmalbie Жыл бұрын

I absolutely adore your videos! Thank you so much

@kev4354 3 жыл бұрын

new to rc cars as as I am a rc slope soarer but this video really helped a lot. Thanks

@MrLeo2A6 3 жыл бұрын

Great info there needs to be more of this kind of content, thanks heaps for your time and efforts most appreciated

@deanpoyner274 3 жыл бұрын

Great video,will be putting a brushless motor in my zorro

@nonyabusiness4833 Жыл бұрын

I just got mine today from the link in your other video on it. Can't wait to take it out 112 quid is brilliant for what you get.

@Lee.gRC27 3 жыл бұрын

Iv got the ftx outlaw, so it looks like that will be turning brushless very soon , Great content as always 👍🏻👊🏻🇬🇧

@TomleyRC 3 жыл бұрын

It’s a good chassis!

@MatMabee Жыл бұрын

Would have been so cool to have tutorials like this when I was starting on nickel cells and throttle servos. Very cool video thanks

@vwbeetleb0b 2 жыл бұрын

Subbed. been looking for a few hours for a simple to understand video. I was big into RC cars and trucks back in the late 80s and 90s as a kid. I have no clue about this modern stuff. I still have my original Tamiya Frog. It's in need of a lot of work. I'm not interested keeping it original with vintage parts I just want to make it fun. Seen a few online that have gone brushless which look fun. So this vid has helped a lot to understand it more.

@Hobby_Hooligan 2 жыл бұрын

I agree i enjoy upgrading but not breaking so i love how you recognize moderation with speed. Flat ground is best for track racing in my opinion but those dunes are fairly gentle an make for some great camara shots 🤗

@scottp.2995 Жыл бұрын

Good timing I have a Hosim 9155 brushed and need to change it to brushless!

@tripyramidpictures9224 10 ай бұрын

Thanks for the very informative video!

@Kptain Жыл бұрын

👍 Great video, everything explained in great detail. I like your way, you would definitely have made a good teacher too... 👍

@islandrc-duke1972 3 жыл бұрын

Sweet brushless upgrade and bashing

@alanroadknight 3 жыл бұрын

Love your videos keep it up I just orderd motor kit that was in your link looking forward to it coming now

@TomleyRC 3 жыл бұрын

Thanks mate 😎

@paulmaybury5700 Жыл бұрын

Thank you on upgrade motor to brushless now i now how it's done and the parts i need top video👍👍

@mulberry8930 2 жыл бұрын

I am impressed with your approach bashing approach & do the same but with a 3s. Love the green you got there.

@johncardwell3119 3 жыл бұрын

Great video good speed for 2s

@madrich2018 3 жыл бұрын

Yeah man 40mph is more the enough. Great video mate, the truck looks fun

@panzadeviborarc9613 3 жыл бұрын

Great info and video Bro!! Very nice video. 4 thumbs up!! I enjoyed it a lot, I like a lot your style. Yeaaah!!

@thierrymaillard820 3 жыл бұрын

Hello, very good video! I really like the camera under the body, especially during the barrel roll 🤪 Super Truck ! 👍👍👍👍👍

@TomleyRC 3 жыл бұрын

Thanks mate 😎

@009ADVENTURES 3 жыл бұрын

I run most of my rc on 2s just because of the fact that usually there's less damage. Good video as always bud 👍

@apexlucas 2 жыл бұрын

Are 2s batteries quick

@davescommonplacebook9374 2 жыл бұрын

I really appreciate this. Thank you.

@Marino_RC 3 жыл бұрын

Nice share Tom, very informative... thx for sharing my friend 👌🤩👍

@barceloni1984 2 жыл бұрын

Great how to. I'm thinking about ordering this same combo for my dromida backbone (same as ftx outlaw). So, essentially the same chassis as your zorro. Ali express has them for $43 right now, without the servo. I already upgraded to a Amazon 20kg metal gear cheapo anyways. Very fun rc for the price, just wish it had a bit more speed. Thanks for all the great info. Been watching your videos for about a year now. 👍

@LIMI7EDMODZ 3 жыл бұрын

13:02 Plug in the servo and power it up (also center the steering trim on your transmitter) before installing the servo-arm to center it.

@TomleyRC 3 жыл бұрын

Good tip

@MCsCreations 3 жыл бұрын

A servo tester can help a lot as well.

@SodlidDesu 3 жыл бұрын

Learned that one the hard way! Put the servo arm on and it flopped over when I powered it up.

@jdsrcs8061 3 жыл бұрын

Great info!!! Big difference!!!🤘🤘🤘

@TomleyRC 3 жыл бұрын

Thanks mate

@richwrag3308 3 жыл бұрын

Love the intro

@paulbird5088 3 жыл бұрын

Great vid. I have the same car and the same brushless set up but I swaped esc for a 120amp and upgraded to metal spur gear and metal drive shaft and ran it on 3s its a total animal and quite fun .

@TomleyRC 3 жыл бұрын

Sounds like it's a bit of beast!

@paulbird5088 3 жыл бұрын

Yes it is I've almost upgraded everything I can to handle 3s metal Chassis metal swaybar and and new wheels and tyres . Great channel look forward to your vids.

@philhumber1534 3 жыл бұрын

Great vid, trying to catch-up with stuff now I'm out of Queens Medical Centre, don't like hospital as it is but being tied to drips for 3 days. Will help my conversion plans so cheers.

@SharkysGarageRCandMore 3 жыл бұрын

Very informative, i feel i could probably do this now, might look at the brushless kit for the sg 1604...

@danlad77 3 жыл бұрын

Perfect timing! Want to convert my sons 550 Typhon to 3s. 🙂👍🏻

@TomleyRC 3 жыл бұрын

Brushless Typhons are really nice to drive! I'd go for a 80a or 120a ESC with that

@danlad77 3 жыл бұрын

@@TomleyRC Thanks for the info. 😊👍🏻

@mrtiff99 3 жыл бұрын

Great video, thanks!

@boterkaas472 2 жыл бұрын

Thx man i am ganna buy my first rc and that is this so i am gonna fefently get a bruchles moter in there thx alot👍👍👍

@richsmith6810 3 жыл бұрын

That's a super helpful video. I'm guessing the the principles are similar with most RC cars? I'm looking at building a speed runner out of my Wl Toys 124019. Nothing mega on speed but around 50/60 mph would be great. I also 100% agree with looking after the cars rather than destroying them every time you drive it

@policopaul7961 3 жыл бұрын

I use the same tactic with screws. Somethimes for ex if i take motor out i put the screws next to the motor, when you strip your car apart. That was a verry nice and informative video. More like this one please👌🥙

@johnpacheco4059 3 жыл бұрын

Very informative thanks 😊

@TomleyRC 3 жыл бұрын

You’re welcome 👍

@rc3151 3 жыл бұрын

Nice one Tomley thanks

@Oyvind88 2 жыл бұрын

Great video, reallly helpful😀🇳🇴

@danielemulazzi1615 3 жыл бұрын

Gran bel lavoro ...modifica essenziale ...ora è un missile ...bel video. .. ciao dall'Italia

@MrIshinryu 10 ай бұрын

Hi Phil, thanks for the awesome content, me and my son look forward to your videos every week. A bit of advice if you don't mind, I have done a brushless conversion on my Zorro, 4370kv 3650 surpass motor and a 120 amp esc and stock gearing as you did, I am getting serious cogging issues even on smooth surfaces to the point that it hardly moves, any ideas as you seemed to have no issues with yours. Thanks in advance for any help and please keep up the great work and channel. Cheers Nik

@cowboy21745 2 жыл бұрын

I love my dumborc controllers they work great

@fran.6496 3 жыл бұрын

Oh Cool! My dad is also airplane electrician :) Cool mate

@ricklepickle9032 3 жыл бұрын

First, and this is awesome

@estellesaunders7616 Жыл бұрын

Thanks for an amazingly helpful video,im looking to do my 1st brushless conversion over the winter on a 1/10th DEERC 9200e as its a snail brushed lol 😂

@jerryhermann7233 2 жыл бұрын

Love the under body cam shots.

@sharkey9 3 жыл бұрын

One important note to your charging: You selected LiPo charge which usually does NOT balance. Instead, you should select LiPo CellBAL. Might wanna double check but that's how Junsi chargers usually work (this one is just another Junsi clone).

@TomleyRC 3 жыл бұрын

It does also balance them on the normal setting

@sjoerd104 2 жыл бұрын

no, lipo charge does balance the cells, I've got a similar one

@Traxxas129 Жыл бұрын

@@sjoerd104 yes

@tooleyzrc1973 Жыл бұрын

I just bought the laegendary Nitro... which you know shares parts with the FTX cars. I absolutely love this thing after putting a brushless system in it. I put the spektrum 100a BLX ESC and motor combo from the Arrma 3s line. These sub $100 cars have mod 1 gears, a center differential and metal front and rear differentials. The tires are supple and firm at the same time. I can't believe the quality you get for less than $100 from these companies.

@relaxwithmatt3329 2 жыл бұрын

Great vid again mate love watching your vids ive done the same brought brushed version of the zorro and put in a brushless setup in it and it's crazy and so much fun quick question tho any advice on keeping front wheel on ground on take off as it's constantly lifting the front right wheel and losing grip keep it up with great vids

@camrowdrone6497 3 жыл бұрын

Enjoyed 👊🏻👍🏻

@SharkysGarageRCandMore 3 жыл бұрын

You did another me video ! It's awesome....

@alanroadknight 3 жыл бұрын

I just adding another message as I watched video and orderd the brushless combo and it arrived just over a week away and ids bloody brrilliant and so fast but thanks for letting us know about this system