Moze i bolje slabo poteza ko da je prenos zupcanika menjao a ide dobro,ne znam odakle je pa sam pito ako oce da kaze od sta je cilindar koji klip nosi i karburator od sta je stavio

Hi, Cylinder is from a Puch, but this is just a base, now it is modified to a degree that it is basically custom made cylinder. piston 38,5L with only top ring. carb can be seen in description. it can go 100 on stock drivetrain for sure, but now it is optimised for acceleration. still goes 95 :)

the top speed of this is 95 kmph. Well... you can see in the video that all the components are well optimized. everything adds up and the end result is a fast little moped :) the biggest improvement is definitely the engine case intake, no doubt in that!

15mm carb is a bit small for 70cc,you can ask a tuner in your area to port your cylinder,if you dont have make a custom exhaust

no worries, there is still a lot you can do. it takes time and also money to get to speed ;)

www.righettiridolfi.com here you can find it

@@blazkorotaj3515 Cant find it on the website

@@notagunfreak8146 maybe it is not produced anymore. i dont know the details...

mopedist.si/viewtopic.php?f=30&t=1802 lahko me dodaš na FB in prideš pogledat

custom cilindar i glava,lamelni usis na blok,dellorto vhst 24mm

Puch monza 50cc. močno predelan, 38,5mm

Lamelno sesanje direktno v blok. Ni prostora, da bi naredil drugače.

Jarno Bovendorp yes it is, but tuned in length and with custom header. A nice base though 😉

Zdravo, tega fila žal več nimam. Imam pa ta del, ki ti ga lahko prodam za 6 hladnih pollitrskih ;)

12mm crank with silver bearing. I have the same shaft for years and works without problems

How fast did it goe?

no idea to be honest. it is faster than a 10 hp yamaha 125-4stroke (air colled)

Robert Šajt Agrocorn nikoli nisem izmeril. Ocenjujem da okrog 100 km/h

Hi, it is all in the video... i have named all the parts, that can be bought. A lot is custom though...

Ne, 2.

Hi, it is VHST 24

Tudi v drugi prestavi so enaki alu segmenti. Nikoli ni bilo problemov z zdrsavanjem ali pregrevanjem. Obraba sklopke ni opazna

@@blazkorotaj3515 Fajn. Pa ti rožlja kaj sklopka na štandgasu, ker nimaš vzmetne podložke med sredico in segmenti za tesni ujem? Meni se sliši.

Depends on gearing. With 26-22 probably more than 100km/h, but I have to test it.

very nice acceleration, the best automatik i've seen

I need to check, will let you know. Although it is not the best, with more cad knowledge it can be perfect.

@@blazkorotaj3515 thank you! im also very curious about the clutch that you are using do you have any info on it?

@@ikilforkut Hi, the clutch is my own design. It is available for purchase, but in raw form, without shoe material which can be chosen for your specific needs (and budget)

@@blazkorotaj3515 thank you but i wont need it for now haha in the spring im gonna try and design my own clutch and also produce it. did you find the stl file for the venturi?

@@ikilforkut i have the stl ;) how can i send it to you?

it is really loud and it is not comfortable to ride at low speeds. i guess i could make it quieter and with longer gearing more pleasant to ride. but if you want something for the street it is maybe better to get a big bore kit.

Rok Strojin potrebujemo samo še dirke 🤩

Ja😂Sm ne vem ce je tu ta masina zdej je 70cc gor drgac pa vilce pa feltne so sigurnu od tega na videu k so istu rjave na leu stran

v drugi prestavi so 'mehke' piaggio vzmeti. spelje pri cca 6000 obratih, menja pa odvisno od obremenitve. s polnim odprtim plinom menja pri cca 11.000 -12.000, se pravi prestavo zavrti do konca. če pelješ počasi menja na cca 7-8.000

@@blazkorotaj3515 najlepsa hvala

Defenitly not gay to me! You have to admit it is one of a kind :)

blaž korotaj. Ok I dont like purple bikes. You actually like but I am not hater video is great