Article for this video: jayscustomcreations.com/2019/...
Пікірлер: 264
@HelloAnthony Жыл бұрын
If anyone is looking for a dust port adapter, Rockler sells two adapters that will fit the 120mm port. One is made for hoses ("Dust Right Schedule 40 PVC Adapter, 4'' PVC to 4'' Hose" - #56472) and the other is made for fittings ("Dust Right Schedule 40 PVC Adapter, 4'' PVC to 4'' Fitting" - #52680). If you are using the Dust Right handle, you'll need to add the "Dust Right 4'' Tool Ports" (#25516) as neither adapter will fit (though you could add tape to shim it).
@BdwyMTI3 жыл бұрын
Bora's 3550 Portamate will accommodate the machine, and swivels in every direction. It's less expensive than Felder/Hammer's mobility gadget as well. I can move my machine literally with one finger once it's unlocked. It's rated for 1500 lbs.
@BearCreekWoodworking5 жыл бұрын
I like how detailed you got in this video Jay. Thanks!
@brettguthrie47055 жыл бұрын
Totally agree with you Jay I have the C3-31 Combination which is a Table Saw, Spindle Moulder, Thicknesser and Jointer with 12000mm Sliding Table. I love it. Cheers from Western Australia.
@ReallifeconsultingOrg5 жыл бұрын
I have a A3-31 about 6 months,,,,, I really appreciate the quality job. I purchased a narrow width floor jack 17" to move all of my hammer machines. Thanks Jay for coming to the dark side.
@gerardosmi29333 жыл бұрын
Can you give more detail on your fix to move the machine around?
@driftlessjoinery50595 жыл бұрын
Funny, I was looking at this exact machine a few months ago just to use as a 16" jointer and a 'spare' planer. I have the space for single use machines but, as you stated, it's cheaper than anything else available new at 16". The fence flex at the far end is a non-issue as there's never a point load on the fence, but rather a load across a large surface area when in contact with the cutter. I've used Feldor and Hammer machines in the past and found them to be extremely high quality. Really like the Tool Talk series. Keep it up and thanks.
@BlakePizzey2 жыл бұрын
Setting mine up right now! Came back to watch your little tips and tricks. I remembered you had some money ones that I couldn't remember.
@SkylersRants5 жыл бұрын
Excellent review. I learned a lot. I wish I could justify spending that much on my hobby because it looks really nice to have.
@FredMcIntyre5 жыл бұрын
Thanks for the info Jay! 😃 Enjoy your new machine! 👍🏻👊🏻
@dennisfahlstrom70335 жыл бұрын
Jay, as several other comments noted, one of tthe biggest advantages of this combo to a home woodworker with limited space is the elimination of one big tool in the wood shop. I have space and have a pair of Grizzly tools for wood prep: a 12” joiner that I converted at serious expense from straight blades to spiral carbide and a 20” planer that was designed as a spiral carbide cutting head. I can’t agree more, these are a game changing breakthrough in tools. I do think I’d prefer the Hammer combo as it was be almost the same price in total but be a larger joiner but smaller planer. I think I’d try and make the base a 3 point of contact arrangement for easier leveling when you need to move it. Thanks for the good review. Very informative.
@daveweber13315 жыл бұрын
Looks like an enviable piece of equipment, for a small to medium wood shop. Glad for you! The ability to joint as wide as you can plane surely outweighs the switchover issue.
@MikeBramm5 жыл бұрын
I've been looking at this machine. Thanks for the tour of it.
@darrylbrook59685 жыл бұрын
Great review Jay, have had one on the big list for a loooong time. Wish they were that price in Australia..... still stuck with my old 6” jointer.... but cheers glad it works.
@pizzawarlord92325 жыл бұрын
Great review. Thanks Jay. I know they use combo machines a lot in Europe but I have not seen many around me. This may be a solid solution for my small shop.
@robertwelch55845 жыл бұрын
Great review and unbiased which is refreshing in the age of sponsored youtube videos from the "amateurs" out there. And of course yet another machine to wish for in my dream workshop.
@nieljones6555 жыл бұрын
thanks for the review jay. i’ve been curios bout that machine
@81bhoke5 жыл бұрын
Great review! Thanks for taking the time. I have wanted to know about the tools you use and why. It is always good to tell the story of why you bought it and how you use it. That way I can better judge for myself if this is right for me. Well done.
@MnktoDave5 жыл бұрын
After spending $6,700 on a machine like this, I would consider the planing thickness dial indicator to be an 'essential' piece of equipment to get the most out of the machine, and the extra $150 a small price to pay, to obtain that kind of repeatable accuracy. Pretty much a no brainer. Thanks for all your great tool reviews etc, it's really nice to hear in depth opinions from a trusted source like you.
@HybridWoodworks5 жыл бұрын
Regarding dust collection, I’d suggest using the 120mm quick connector and a short section of 120mm flex pipe sold by Felder. The flex is then connected to your 6” PVC via a custom galvanized transition. This will dramatically increase airflow and pick up nearly every bit of dust. I realize everyone’s shop has limitations, but this is the ideal setup, and I don’t want people to think the Hammer dust collection is subpar when it more a function of the long 4” flex you have connected. Overall a great video! Keep up the hard work.
@Finewoodworkingofsc5 жыл бұрын
Great video, Jay. Thanks for the thorough review.
@rjtumble5 жыл бұрын
What a cool machine, thanks for the walk through. Seems like the bed adjustment is a great opportunity for Hammer to make a change. Have a high speed and low speed gear (pull the handle or something to engage). Big moves use the high speed, small moves use the low speed. You could cut the big change time in half (or more). But, like you said, it didn't appear to take all that much time.
@kellybreit5 жыл бұрын
Hi Jay, I have the A3-41A jointer only version and love it. Felder sells a 120mm to 100mm (4") quick connection reducer that works really well. SKU is 02.2.02, I paid $15.50 for it when I bought my machine last year.
@Dave-xq2jb5 жыл бұрын
Thanks Jay nice review - I need to get back into my shop. Especially for medicinal reasons.
@ChipGwyn5 жыл бұрын
I got the slightly smaller version, A3-31. Ive been super happy with it. Decided on that over the Jet JJP-12HH.
@SnatchinSnacks2 жыл бұрын
I just ordered one today....glad to hear you have been happy with it!
@kegboy125 жыл бұрын
Nice. I've always wondered about these combination machines.
@robertw.14995 жыл бұрын
Hi Jay, this machine is quite popular here in Germany where I live (I‘m English). That cutting head is innovation at it‘s best. I have neither the cash or space for such machine in my hobby shop, nevertheless, an enviable piece of equipment to have. First US shop I‘ve seen with a Hammer machine. Great review 👍👍👍
@SweSuf5 жыл бұрын
I have an A3-31 and agree with all You said. As a weekend hobby wood worker with limited space the time to switch modes is insignificant. The mobile base is a must for me, as I have to pull the machine out to use it, and works excellently (as with my Hammer band saw). The planer thickness dial works very well, with an accuracy of 1/10 mm (4 thous), probably better if I adjusted it. The optional table to use as planer outfeed is OK, and also fits the band saw; it is, however, a bit fiddly to attach/remove to/from the planer, but works well on the band saw. Also, the machine needed no adjustment at all when it arrived, I could really just plug it in and start working!
@JohanTwinsen5 жыл бұрын
Do what I did if you have the version with no guage. Take a cordless drill, put in the biggest torx bit you can find. Heat it up with a blowtorch and press carefully into the middle of the setting wheel. Use the drill to quickly lower or extend the table. Makes a job that takes several minutes last 15 seconds.
@farmcat31983 жыл бұрын
Awesome! Thanks for throwing in the Corvette and Malibu comparison. Now I can think about this purchase in terms of bass boats, sports cars, nice bicycles, etc. Not such an overwhelming purchase after all.
@barstad-95915 жыл бұрын
16” helical is awesome! Congratulations 🎈
@MRvanI19763 жыл бұрын
I just orderd this machine. I liked your video and will lookout to see you using it on some projects
@JohanTwinsen5 жыл бұрын
This style of protection is better when working with thiner/less stable materials. For example if you are working with a board that might crack and split during planing. Imagine what happens, you have your hand on the material and during the planing one of the parts fly back and expose your hand into the rotating blades. In this case your hand is never above the cutter directly.
@TSPhotoAtlanta3 жыл бұрын
Operating properly, your hand is NEVER DIRECTLY OVER THE CUTTERHEAD! Also, never within 8" of any cutterhead or blade -- exception for handheld tools like an unmounted router in a base or power planer.
@JohanTwinsen3 жыл бұрын
@@TSPhotoAtlanta But then again you have a lot of people doing exactly that. Just look through youtube videos of people using planers. EU regulations are there to reduce the number of accidents from misuse of equipment. Accidents don't happen if you use the equipment properly.
@ralphlivingston8944 жыл бұрын
I don’t think I’ll ever buy this machine but I would certainly like to. The thickness/dial indicator is just about the coolest accessory I’ve seen this year. Who cares how much it costs? (Easy for me to say because I didn’t pay for it.) Can you imagine spending $6000 and skipping one of the coolest features? Great video.
@Hubbmade5 жыл бұрын
Great information! It looks like a very impressive machine.
@ryanmeloney34215 жыл бұрын
Well thought out and presented
@trainwon56994 жыл бұрын
Awesome review thanks Jay
@shamirbrouwer62115 жыл бұрын
Lovely video mate! Was looking for the same one 😎😎
@jamesstewart52205 жыл бұрын
I have the Hammer C3-31 combination machine. I find the stoutness of the machine to be far better than what I have seen with sawstop, jet, etc. The European sliding table saw is amazing to work with and much safer. Felder has some nice safety jig options, especially for the shaper. The 5 in 1 combo is great for the hobbyist that doesn't mind taking extra time to switch the machine around, if you have a busy schedule the changing from shaper to table saw could become a pain in the rear. Anyway, I got my set up for around 14500.00 with the mortise tendon and a power feeder option. The main reason I went with a Felder product is I trust the quality from that region of the world, and I really liked the sliding table saw for my sons to work with. The thought of my knuckle head sons sitting behind a table saw and it kicking back, or them taking their hand so close to the blade gave me nightmares. The slider is nice with the clamps, you don’t even need to touch the wood on a lot of cuts, you just push the table trough.
@foldby375 жыл бұрын
Wery good review, i have just ordered my machine today.. Thangs...
@thesplinteredfinger5 жыл бұрын
Jay, I like it and think it’s a wise investment for your needs
@Selandry14 жыл бұрын
Thanks for the great review! Another grat video !
@travel7345 жыл бұрын
Great video. You answered my concerns. I like the 16" bed. I could sell my 6" jointer and DeWalt 735. Now to find the space in my shop and to add 240v power
@perkinsguitars16645 жыл бұрын
I have a Rikon Bandsaw with the same type of mobile base as this machine and I have the same issue with it. It’s super inconvenient to use.
@getenlightened5 жыл бұрын
This looks amazing.
@FranksDIY5 жыл бұрын
Looks like its the way of the future multi tooling to save space. It looks great i was looking at one this weekend at a woodworking show
@What_Other_Hobbies3 жыл бұрын
This is a great machine for a small shop. I agree for a high volume production shop, it is not as convenient as dedicated units. The price seems high, but at the same capacity, it is cheaper than dedicated units. I with one day I can afford this in my shop.
@bobt25225 жыл бұрын
It looks like a beast of a machine. It is way beyond my needs and my budget.
@whitevanman87035 жыл бұрын
The A3-31 (12") is more budget friendly. Some people in Europe have given up on table saws, they use a bandsaw and one of these machines for dimensioning and a track saw for panel cutting. Therefore if you only get a bandsaw and a machine like this it is more budget friendly and space efficient.
@bobt25225 жыл бұрын
WhiteVanMan, the A3-31 is closer but it is still beyond me.
@CharlesReiche5 жыл бұрын
I have an INCA 510. My dad has an INCA 570. I do like a combo machine for the space. Wish I had a helical head. I have a project that really needs it right now!
@nsanerydah3 жыл бұрын
Looks great. Just happy I recently got my 8” Grizzly with helical head. Was wondering what you might joint 16” wide. Then I see your 15” cutting board getting jointed. Looks like you could lay down on that thing! Amazing work always.
@joeleonetti89765 жыл бұрын
Thanks Jay. I have been woodworking with hand-tools and am looking to have minimal machines in the shop. Three things I want are a bandsaw, jointer, planer and dust collection. Dust collection will be ClearVue. Bandsaw will be 18" but now sure of brand yet. I have been leaning towards the Hammer 16" model you have for a jointer planer combo. I'm ok with the price. You did mention measuring the fines. Could you elaborate a little on this? I have already used a Dylos to measure fines when working with various hand tools to understand how much dust exposure I have.
@Bluuplanet5 жыл бұрын
I can see that a helical head carbide insert would slightly overlap the cut of the one that follows it whereas on a spiral head, one insert stops cutting exactly where the next one starts.
@theshadow15595 жыл бұрын
Thanks once again for the demonstration and the firsthand information on another of your woodworking machines. Personally, I like the idea of having the planner/joiner combo as a floor space saving shop machine. However, on this particular combo, I do not like the safety guard at all, the extra length of the cutting shield sticking out from the bed of the joiner is simply something that is in the way of the miller's forward movement as he walks with the piece he is milling. Secondly, it appears that with the safety shield locked in place and the shield being raised above the milling piece, the shield actually leaves the cutting blades exposed to the hands of the miller once the milled board has been passed across the cutting blades. (IMO : not a good safety design) I will stick with the American style spring loaded swing cover which always shields the hands of the miller from contact with the turning blades of the joiner. Albeit, for a woodworker with a limited budget, there is little doubt that the combo price tag comparison is quite an incentive to overlook the design of the blade shield and/or the aluminum backstop.
@JackbenchWoodworking5 жыл бұрын
I've had the same machine for just over a year. I bought an extra guard for the jointer so that I could cut it into 2 pieces. That way I can have 3 different sizes 6", 10", and 16" depending on where the fence is set. Believe it or not they actually sell them for a very fair price.
@gerardosmi29333 жыл бұрын
hi Jack, do you have the part number?
@JackbenchWoodworking3 жыл бұрын
@@gerardosmi2933 I don't have the part number. I just called the hammer representative and told him what I wanted.
@daniel923e5 жыл бұрын
Jay, I miss your project videos, do you plan to release any video soon?
@gateway16004 жыл бұрын
I bought the 12 inch version of the Hammer. My number one complaint is that it was impossible to square the fence to the bed. After endless calls and emails to the sales and tech service departments, Hammer just kind of gave up. I was just left to my own devices to figure out what the problem was. I finally just shimmed the fence with brass sheet stock that I had purchased from Lee Valley 15 years ago. Otherwise the machine works very well and I'm very pleased with it. I use a rubber plumbing boot 5 to 4 inch with band clamps for the 4 inch Clear Vue dust collector hose. Works fantastic in planner or jointer mode.
@gateway16004 жыл бұрын
Clarification: a rubber plumbing reducer 5 inch to 4 inch...
@bradleyrhoades10655 жыл бұрын
I love that machine! I like the duel purpose, and if you have a small shop like me it would be ideal!
@tims.28322 жыл бұрын
Best review I´ve seen so far and thak includes German (and Austrian) reviews as well.
@clydedecker7655 жыл бұрын
Well if I were going to get into it, I'd definitely trash all of my current stuff and start with this machine with the same bells and whistles because NONE of the others impressed me. One thing - "NO SNIPE" is one claim NONE of the others can make. Thanks Jay.
@GeraldJensen5 жыл бұрын
Very thorough ... Thanks!
@georgeeads86895 жыл бұрын
Very good tool review.
@AdamCraigOutdoors3 жыл бұрын
i find these combo's interesting. I have been kicking around the idea of getting a Rikon 12 for my shop. I have a 6" jointer and 12" planer and need to upgrade the jointer atleast. I also would prefer a planer with a helix cutter. Thanks for the video!!
@TSPhotoAtlanta3 жыл бұрын
Same, except haven't looked at many yet. And not at Rikon. Are they an importer of relabeled Chinese or Taiwanese machines? (like Jet, for instance, though Jet has tried to go upscale....)
@paisaconstructiondavid19645 жыл бұрын
I agree, I also have the same one, as I told you when you were in Atlanta recently. I am quite happy with the choice. I will add that in my case the time saved using this machine vs other methods like the inexpensive router sleds. I have the mortising attachment, but only Because they sent it to me in error and I didn't have the heart to return it, I find the Penthorouter much better. If anything is true is that the spiral is definitely the best way.
@andresfelipemoscosohernand23714 жыл бұрын
I just purchased this machine and from all the research I made, it looks great and the accessories on the website seem pretty awesome. I haven't received it yet but I am looking into the mortising attachment. Have you used it at all? It seems like it would be in the way when jointing. Or is it made to attach and remove when needed? Thanks!
@paisaconstructiondavid19644 жыл бұрын
@@andresfelipemoscosohernand2371 yes I do have the mortising attachment, but I remove it from the machine and honestly the fact that it uses left cutting bits it's hard to find a Find at a good price. I prefer the Penthorouter
@andresfelipemoscosohernand23714 жыл бұрын
@@paisaconstructiondavid1964 oh ok. That makes sense. Even though you don't use it. From what you can see, do you think it would be in the way when jointing? Also, I watched your videos. Sweet tools!! Lol
@paisaconstructiondavid19644 жыл бұрын
@@andresfelipemoscosohernand2371 Yes it is definitely in the way. It is not too heavy or difficult to remove. The biggest limitation to this tool is the depth even the biggest bit is limited to about 3.5in. And I have not found one that is longer or bigger
@davecurda23505 жыл бұрын
I have had mine for 2 years and absolutely love it. But in Canada it cost me $9000
@gateway16004 жыл бұрын
Jay... why can't I cast tool talks to my TV? Is it a setting you control when you make a KZfaq video?
@frank32835 жыл бұрын
I just got a A3-31 and I skipped the Hammer mobile base. I got a Portamate 3500 and it's awesome. It's obviously not the same shape as the base of the machine, but all four corners of the machine are supported.
@EscapeMCP5 жыл бұрын
For height adjustment perhaps a attach a small motor with gears (like first solution did, but with motor instead of drill) and have a simple up/down button to control height?
@JW775 жыл бұрын
It seems the felder/hammer cutter head is significantly larger in diameter than most other jointers/planers of this size. Do you think that makes a difference?
@johnknestis38515 жыл бұрын
It looks like with the spiral cutting head it would pull the work piece tight against the fence too.
@bg735 жыл бұрын
"I don't have to move it often, but when I do, I wiggle it.... just a little bit"
@joeyfranks86224 жыл бұрын
Thanks for the video. What do you think is an acceptable tolerance for a infeed or outfeed table on a jointer? Specifically, I am curious about the variation that could exists on one jointer table, not both. So, assuming a strait edge touches an outfeed table on both ends, how much variation would be considered acceptable on a cast iron table? .001? .005?
@dennismacwilliams1964 жыл бұрын
Nice Video thanks very informative...
@joeyshofner6395 жыл бұрын
I’m drooling!
@Lee-qp6gf5 жыл бұрын
Well done.
@jimw5444 жыл бұрын
Hey Jay, on the Hammer web site they use a pallet jack to remove the machine from the pallet. Another tube vid a guy said after many hours of setup issues Hammer sent a service tech to do the setup. Please note this guy is new NY and the Hammer tech was not far away. Please tell us how you got it off the pallet, got under it to bolt on the tung for the Moble base and what setup was required (level tables etc.).
@davem42565 жыл бұрын
Thanks for the great review Jay. I just purchased the A3-31 and look forward to the extra capacity and also the compact form which will take the place of 2 separate machines. As you pointed out the cost of 2 machines would be significantly more than this one unit.
@mikesibley93394 жыл бұрын
Now that you’ve had it for a while now, how about it? I’m considering selling my PM 8” jointer and Dewalt for this unit. A few things that worry me. Having to crank the bed up and down 6”, having to lock the bed when planing every time you change height while making multiple passes, and loosing some bed length form my PM jointer. Please let me know how you feel about these?
@dublinf44774 жыл бұрын
Hey jay just curious did you ever consider the Felder ad741? It’s a jump I know but just wondered if you looked at it
@hazembata4 жыл бұрын
How much do you take off per pass when planing (rotations of the crank)? Just got mine and it does not pull the wood through at a consistent rate. It sputters through. Can't tell if I'm trying to take off too much or too little? Thanks.
@coryclaassen98433 жыл бұрын
I'm debating between the A3-41 (16" wide) and the A3-31 (12" wide) models. How often do you find yourself actually needing more than 12" in width for planning?
@CHRO_KO5 жыл бұрын
Hello Jay. I hope you are doing great. I recently received this same machine and I really need your help. Can you tell me exactly with links which plug connector and outlet you used to connect this machine? I see the cable that came with this machine is very short.... PLEASEEEE HELP!!!! Thanks in advance
@nfix095 жыл бұрын
might have been nice to have felder stand alone machines, or other comparable combo machines in your price comparison, but I'm sure anyone spending this much is smart enough to compare the prices themselves, nice vid cheers
@berksoaks43405 жыл бұрын
Maybe for production shops not the best but definitely a personal shop it's perfect! Awesome price too
@murc1115 жыл бұрын
It's nearly 7 grand! We have very different opinions of an "awesome price".
@renturner875 жыл бұрын
Do you think that guard is different jay ? 🤣
@masterdiver0015 жыл бұрын
You need the comfort fence. This you can fold at 3 positions and it is not in your walking space.
@alexworks96595 жыл бұрын
I guess counted 58-60 revolutions of the handle. No biggie. 1 minute changeover is totally fine. I love this machine and have been wanting one for a couple years. I have a portable “desktop” fan on a bendy arm on my planer to blow chips off as you feed. I hate having no good place for both planer (DW735) and jointer (DJ20) I wanna stack planer over the jointer. Having Infeed and outfeed of both are a pain.
@joeleonetti89765 жыл бұрын
Alex Works, I am a hobbyist. To thicken by hand is slow going to have to spend only a minute turning a handle to change over makes me gleefully excited.
@tindjin075 жыл бұрын
Always wondered how it was actually using one of these.l If you have the power available it does look like it would be good for a smaller shop.
@whosaidthat52365 жыл бұрын
Man that thing is sweet , all I have is a #5 hand plane 👍🏻... And a porter cable 6” table top jointer. lol for my dirty wood,so I don’t wreck my irons rough milling. I would love to have something that could joint 16” in one pass... mmmmm porkchops 🤤
@drwd104 жыл бұрын
Ordered mine yesterday, they are on sale right now. Although they said 4 to 8 weeks for delivery on the website, I got a call today and they said it would probably be 3 to 4 months before I actually get it.
@mikesibley93394 жыл бұрын
Did you ever receive it? I’m about to order
@drwd104 жыл бұрын
@@mikesibley9339 I just received it yesterday, 7 months and 1 day after I ordered it.
@gerardosmi29333 жыл бұрын
How much did you pay for yours with the sale price?
@tpatrickm13 жыл бұрын
Damn I want this!
@toddrichardson34155 жыл бұрын
Jay, have you seen tear out with your use of the A3-41? I've seen one video showing some tear out where there wasn't any with the Byrd designed cutter head. By the way great video with lots of details. I'm seriously considering this model versus 2 different machines.
@dblehar5 жыл бұрын
its unfortunate that Felder doesn't offer the folding guard (Euro "comfort" guard) for the hammer machines. Being able to fold down the section that is hanging over the side is awesome so you don't walk into it. And while pricey, the power drive option makes change over from planer to jointer mode a complete non-issue. turn the dial and a motor moves the table up and down with a digital read out for planing thickness. As far as dust collection goes, the shroud is pretty similar between the machines. I ran a 5 inch line and it takes up everything, and thats with a 2.5 HP cyclone, even running at the higher feed roller speed (12m/min vs 6 m/min). you might consider running 5 inch line, would think that with your larger collector you should have no problem getting every bit of dust with that.
@thegreenman48985 жыл бұрын
the other big advantage of spiral heads is you dont get tearout on figured woods, doesnt matter which way the grain is going, the finish is superb, ive heard bad reviews on the dewalt 735 knives , over the life of the machine, id say with constantly replacing knives versus a higher cost on spiral heads the cost difference is negligible, and snipe is much reduced.
@richm91575 жыл бұрын
Great review -- at 16:38 in the video, whose dust port quick disconnect are you using ? I have same 120mm OD dust port on my C3-31 Combi. Thanks much ...
@richm91575 жыл бұрын
oops, never mind, watched the whole vid, ;-)
@markschreiber4664 жыл бұрын
Is there a speed adjustment for the planer?
@matti11115 жыл бұрын
Great space Saver
@chrislehr075 жыл бұрын
Wait a sec, published 2/23/2019, but I swear I watched this content already.
@accountshanahan5 жыл бұрын
I'm from the UK and cant get my head around the US style pork chop guards. I suppose it's what you're used to as I've only ever used the Euro style machines. On the fence, the reason pretty much all Euro style machines have aliminium fences is the weight, if you had a large cast fence lifting the tables to convert to planer mode would be really difficult due to the sheer weight. I like that that machine has a parallel table lift when they both just hinge at 90 degrees (I have a 10" JET and its the same basic design), on some of the Euro machines the tables lift out at a 45 degree angle which means you need a tom of space behind them. Ive playing with the idea of upgrading my 10" JET to a helical cutter but I'm looking at 900 USD to get a Shelix and ship it to the UK, I reckon the machine is only worth 700 so kind of an odd value deal, I'd love to sell it and buy the 12" helical Hammer.
@81Sazerac4 жыл бұрын
How many cutters is on that beast of a helical cutter block?
@Madmoody213 жыл бұрын
There are some very nice things about this no snipe is a plus. Capacity head looks good. The 6.5 inch thing is a killer. Can you see a reason why this has to be done Ie is it the dust chute system?
@nevermindthebull0cks5 жыл бұрын
What are the feed rollers made from?
@NASTYcraftX5 жыл бұрын
If you want to get super fancy you could run that gear and chain to a tiny motor and arduino and have it go up and down automatically.
@mururoa70245 жыл бұрын
Powermatic is the gold standard because a lot of its parts are made of solid gold, hence the exorbitant price. ;)