ToolBox Must-Have | Klein Tools Digital Angle Gauge and Level 935DAG DIY To Professional Use Tool

Рет қаралды 74,185

Күн бұрын

This Klein Tools Digital Angle Gauge and Level are similar to most other Digital Angle Gauge and Levels that you've seen to date. This is a brand you know and can trust. But are they any good??
----------------------------------------------------------------
► Klein Tools 935DAG Digital Electronic Level and Angle Gauge on Amazon: amzn.to/2PsSw8v
► Cheapest One In The Jungle: amzn.to/2DXNoE9
► Amazon's Top Pick: amzn.to/344li4v
----------------------------------------------------------------
Why Choose the Klein Tools Version?
There are many different brands of digital angle meters and levels on the market. Finding one with a brand name that is recognizable can be a task, especially on Amazon! Here are some of the reasons I would choose to look at the Klein Tool Model
- IP42 Rated - Basically this is fairly dustproof and will withstand a light water spray.
- Two Year Warranty from a company that will still be around in 2 years.
- Accuracy - This unit is rated for ±0.1° from 0° to 1°, 89° to 91°, 179° to 180°; ±0.2° at All Other Angles
- High visibility reverse contrast display is very easy to read in all lighting.
The Cons we found:
- Accuracy - While we feel this unit is very accurate when used on the magnet side, we found that this was not the case when flipping the unit on its side. We were always off a few tenths while checking this.
- High visibility reverse contrast display will scratch easily when wiped off.
We would order this tool over the other choices on Amazon simply because we recognize the brand name and feel that the quality and reliability will be there for a long time because of that. That being said, there are other alternatives and you get to choose where you spend your hard-earned money.
You can find this model for less money on other websites than Amazon, but you have to pay the shipping on most of them. If you find free shipping or can bundle this with another order, that might make the most sense. Most people will find the best pricing finding this tool inside The Home Depot as there would be no shipping costs.

Пікірлер: 44

@joeframer9642 4 жыл бұрын

Klein is a great company. This has its place. Angles,yes.on a chop saw blade, yes....leveling anything over the length of it, no... gotta level from one side to the other, gotta be the two end points . But this does have some uses. ...great video, awesome channel 👍🇺🇸

@williamdavis922 4 жыл бұрын

Thanks for the video Brian, I think it a pretty cool tool that everyone should have in their arsenal!!

@nikobobich9726 Ай бұрын

THIS device is a beast for sharpening knives

@matta7911 4 жыл бұрын

If worried about the screen there are screen protectors you can cut to size and stick over the screen area for like $.99. I have used them on a few tools such as my micrometer, digital air pressure guage or basically anything with a display screen. One protector is usually good for 3 or 4 different tools.

@ginoasci2876 Жыл бұрын

that’s a great idea thank you

@Harleyforever20 2 жыл бұрын

I bought one also. I do wish one of the sides was magnetic too. Very useful, thanks for sharing.

@gvrtools4566 4 жыл бұрын

Great video and tool! Thank you!

@jrorellana4865 3 жыл бұрын

Thanks for the video, the level looks well made. I am an electrician and I own a handful of digital levels but I haven't found any with the digital read out on top for pipe bending with the foot bender. If anybody knows about one please let me know, thanks

@THExLAWxMAN 4 жыл бұрын

Put that in the mini cool tool category.👍🏻

@AntonioClaudioMichael 4 жыл бұрын

Good tool and great video Brian

@magnum15917 2 жыл бұрын

Enjoy the video I was thinking about getting this one or the new one that just came out former RV leveling just wondering how it would work? I will probably also take it out to the range when siding in great idea

@corym2513 Жыл бұрын

Just bought it from HD. Then I see your video. Cool.

@greenspiraldragon Жыл бұрын

Thanks that we can definitely use at work.

@djmjr77 3 жыл бұрын

Lol 😆 start checking everything .. did the same thing when i got a laser measure.. my wife was laughing at me .. lol

@apdjr7309 4 жыл бұрын

The sides and the top are not meant to be used as your bases for measuring. It is off a bit because it is a square case and the case was not meant to be 90 degrees all around. Always use the bottom as your base for measuring.

@eoghanfla6343 4 жыл бұрын

For 30 quid it’s a handy one to have in the tool bag or for doing pitches in metal work but personally I’m going to hold out for the Milwaukee one when the land over here in the next decade.

@dahut3614 4 жыл бұрын

I bought an AccuRemote brand and was disappointed in the LCD display. There was no illumination and I could hardly see the display indoors. A flashlight might have helped, but I didn't have one. The housing is aluminum, though and there are magnets on three sides. I just wish I had bought one with a backlight.

@faw3511 3 жыл бұрын

Try using it to check flatness and coplanarity on jointer tables.

@ryananthony4840 Жыл бұрын

The "Error" issue is a good thing.... it's forcing you to take a good measurement

@jimfeaster4837 4 жыл бұрын

Reasonable price i find alot of time is higher price on tools But as far as tool I like i can see the Value of this one

@WorkshopAddict 4 жыл бұрын

I find the value in this one as the brand will be there if I need the warranty. I will pay the 6-9 dollars more for the tool knowing that. Plus, I know that someone has looked at this and thinks it is quality enough to put a decent name on it.

@kk-hp6ve 4 жыл бұрын

Nice

@gusc6785 4 жыл бұрын

put clear scotch tape on screen b4 using protect the screen

@hmmob3956 2 жыл бұрын

I am not sure if I understand the test that you conduct at 2:00. You put the gauge on its various sides with the gauge staying in the same location on the shelf. It appears to me that that measures how square the gauge itself is, not how accurate it is. When you measure 0.1 degrees and 89.7 degrees the angle between those two sides on the gauge itself is implied to be 89.6 degrees (assuming the gauge is accurate). If you have a very accurate angle gauge or a Starrett combination square you can check if those two sides are really square or if the angle between them is indeed slightly less than 90 degrees. If you want to test the accuracy of the gauge itself then take a Starrett combination square which can be assumed to be square to a very high degree of accuracy and place the magnetic base of the digital gauge on the 90 degree face and the ruler/blade of the combination square. The difference between the measured angles should be 90 degrees if the digital gauge is accurate and - again - assuming that the Starrett combination square is almost perfectly square. Any deviation from 90 degrees would be a measure of the gauge's accuracy. And thanks for the review.

@Dustysa4 4 жыл бұрын

Nice stick! Just cause I'm OCD... scope manufacturers index the reticle off the flat bottom of the scope, below the turrets. You'd be better off squaring up your scope with a deck of playing cards as shims. There's no guarantee the top of the turret knob is level with respect to the reticle.

@WorkshopAddict 4 жыл бұрын

Yes Sir! Notice that you did not see me actually mounting it. I just showed that as a way I used it. It just happens on this scope that is in fact true off the top turret also. Sometimes you can only do so much in a video when you are talking about some things that some people really dislike. #2A

@Dustysa4 4 жыл бұрын

@@WorkshopAddict 👍

@Danwrnr1 2 жыл бұрын

did you not get a case with it? I did

@luktish 2 жыл бұрын

Anyone noticed, that rotating the tool 180 degrees (rotation performed with magnetic base continually touching the table's surface / not changing the tool's surface of contact!) on the flat surface results in range between 0 - 0.6 degree. I am trying to verify the flatness of my table saw, and I noticed this baffling behavior... Even after calibration, the problem persists...

@Dirtyharry70585 2 жыл бұрын

Find a local car wrap shop, and look in the trash for clear vinyl that still has the paper backing. Then just cut a piece to cover the display

@RPRsChannel 2 жыл бұрын

Very odd you didn't add it to a blade, then show how you set the blade to 45 degrees using the Klein tool.

@michaelperez9290 4 жыл бұрын

My wife just got this for me. Havent tried it yet.

@WorkshopAddict 4 жыл бұрын

It's very handy to have around!

@jamesk1619 4 жыл бұрын

I think the error on its side is because that's not a reference side. Only the magnetic bottom should be used as reference.

@ky0611 Жыл бұрын

Mine always says 0.1 too

@neftalirosado6167 4 жыл бұрын

Hello ! Sale in Home Depot ?

@WorkshopAddict 4 жыл бұрын

Yes

@neftalirosado6167 4 жыл бұрын

Thanks for your help and video!

@pappaclutch3266 3 жыл бұрын

Don’t do what I did and place it on hit steel! 🤦🏻‍♂️ lol

@stevevinas 4 жыл бұрын

Or for free download a level app.

@jacobsidorin2055 2 жыл бұрын

This is actually a good Klein tool. Unlike a lot of there tools. Especially since you can drop it and it does not work.

@markpeterson9808 Жыл бұрын

what?

@fiorellam.5179 Жыл бұрын

Klein has excellent tools dude. Wtf are you talking about lol