How to tighten the HAND BRAKE on a Toyota Corolla.

No video

How to tighten the HAND BRAKE on a Toyota Corolla.

Рет қаралды 40,382

Күн бұрын

The parking brake on Steve’s car won’t hold the car on the driveway. So he brings you along to adjust the parking brake and shows you the tools needed to do the job.
To see all of the tools that I use and recommend, visit the Tool Demos store: www.amazon.com...
As an associate, I earn from purchases.
#tooldemos

Пікірлер: 59

@29madmangaud29 2 жыл бұрын

Hey this is the most simple, easiest vid I've seen on adjusting this brake, thank you very much!

@ToolDemos 2 жыл бұрын

I’m glad it helped.

@bobgox 3 жыл бұрын

not sure why, but this problem has been an issue on a few of the cars we have had over the years ...nice to finally know why this happens & how to fix, thanks much Steve !

@ToolDemos 3 жыл бұрын

Hey that’s neat! Happy wrenching.

@bobgox 3 жыл бұрын

@@ToolDemos thanks so much, all the best to you as well my friend !!

@Nick-bh1ib 4 ай бұрын

Thank you, straight to the point video and simple to follow, now my handbrake works👍

@ToolDemos 4 ай бұрын

Great to hear!

@UninstalledLeague Жыл бұрын

Hey, this video was helpful today! Thank you for making it.

@ToolDemos Жыл бұрын

I appreciate you saying that, thanks.

@laurellafferty6941 2 ай бұрын

You made this soooooo easy for me! Thank you!

@ToolDemos 2 ай бұрын

Great to hear!

@ZYH909 4 ай бұрын

Thank you for the simple explanation

@ToolDemos 4 ай бұрын

Glad it was helpful.

@mikevanessen8687 3 жыл бұрын

Love it! Keep them coming

@ToolDemos 3 жыл бұрын

Thanks, Mike. Got a project series starting in a few weeks. It’ll be unlike my regular stuff, but should be fun. I hope.

@MonsieurCafe 2 ай бұрын

God bless you thanks man fron Spain

@ToolDemos 2 ай бұрын

Thank you 🙏

@chief1223 2 жыл бұрын

The only small quirk I find in this video is that you put the center console back over the hand brake, before the function test. Is that necessary? If you needed further adjustment it just seems like you're putting it back on, then off, then on again, seemingly wasting time. Unless the console needs to be in place for some reason that I missed?

@ToolDemos 2 жыл бұрын

Good catch Chief. I may have tested it off camera, but I don’t remember. If not, you’re right - that could’ve been a waste of time.

@salvadoralvarez2093 Жыл бұрын

Gracias gringos greating from Guatemala.

@ToolDemos Жыл бұрын

Hola Salvadore, de nada.

@rogeliomorales1954 2 жыл бұрын

Tool demos gracias por tu information continua por fabor me sirbio mucho gracias 👍👍👍💪💪💪💪💪

@ToolDemos 2 жыл бұрын

De nada Rogelio, te lo agradezco.

@Georger392 Жыл бұрын

Good idea is to have the back of the car jacked up, so you can adjust the handbrake slightly by turning the back wheels to see if they are biting. Don’t put the centre consul back until you have done this.

@ToolDemos Жыл бұрын

Good tip.

@RemingtonShaolin Жыл бұрын

Great video ! Much appreciated ❤

@ToolDemos Жыл бұрын

Glad it was helpful.

@D.I.Y 2 жыл бұрын

Can you make a video on how to do this on pedal style parking brake? Like on your highlander

@ToolDemos 2 жыл бұрын

That’s a good idea. I’m putting that on the list, thanks.

@hyoklee3297 Ай бұрын

When would you adjust at the handbrake versus adjusting the star wheel at the brake itself?

@ToolDemos Ай бұрын

Do the brake shoes first. If it still needs adjustment, then adjust at the hand lever.

@marnernordendal3927 Жыл бұрын

Thank you so much 🙏🙏🙏👍

@ToolDemos Жыл бұрын

You’re welcome

@ahmadghosheh3104 3 жыл бұрын

Thank you

@ToolDemos 3 жыл бұрын

Sure thing, Ahmad. Glad I could help.

@MoeLarrycurly1 2 жыл бұрын

Will this work for the 2003 Corolla

@ToolDemos 2 жыл бұрын

Yes, they’re both the same generation car.

@edwardgoodridge714 12 күн бұрын

Brake is still too high. When you adjust it, it should go no more than two (2) clicks.

@coopersilberling6883 Жыл бұрын

I did rear brakes (drums) all new and stop good but now the e brake is loose goosey (it wasn’t before) it still holds when it’s all the way up

@ToolDemos Жыл бұрын

I hope this helps.

@harryberry474 2 жыл бұрын

High great video Thanks, do you know what model year Corolla this procedure covers? Thanks again

@ToolDemos 2 жыл бұрын

That generation lasted between ‘02 and ‘08.

@harryberry474 2 жыл бұрын

@@ToolDemos ...mine is a '98 but I'm sure the procedure is the same for actual adjustment but the center console is probably attached a little different, I'm not going to mess with it until after replacing the rear brakes later this week, I probably won't have to adjust at all.

@ToolDemos 2 жыл бұрын

@@harryberry474 perfect! Make sure your brakes are adjusted properly at the drum first, then adjust the cable if necessary.

@hafsavohra1879 2 жыл бұрын

Hi My handbrake are so hard to put it back down can you help me in resolving the issue?or is it needs mechanic?Please help.Thanks in advance.

@ToolDemos 2 жыл бұрын

Hi Hafsa. Try lifting the handle slightly, then push the button in and lower the handle. When you lift the handle, it should take the tension off of the release button.

@hafsavohra1879 2 жыл бұрын

@@ToolDemos Thank you for your reply but the Lifting if the handle is main issue as i need 2 hands to lift it a bit and then release it with button.

@ToolDemos 2 жыл бұрын

@@hafsavohra1879 ok, thanks. I suspect you have either a mechanical problem inside your brake drum, or a brake cable that has rust on the inside, making it hard to operate. If it is the cable, it must be replaced.

@stendecstretcher5678 2 жыл бұрын

Maybe check the back brakes for wear first, only do this as a last resort.

@ToolDemos 2 жыл бұрын

Exactly right: 0:24

@jimmymolinaro7554 2 жыл бұрын

What year is ths??????

@ToolDemos 2 жыл бұрын

2006 Corolla S

@danielc.3725 3 жыл бұрын

Okay, hold on a second, I gotta give you some - - C. C.-- , cuz the "emergency handbrake" is a strong indication that your brakes are wearing out, & or they are not properly adjusted, for the "rear brakes" that is, also that metal cable will stretch but ONLY after like 30-40 thousand years and maybe a very, very small tiny Bit, that's why the engineers put that type of device... Sorry bro but BRAKES, is one of my biggest pet peeves, and you do not want to mess around with that at all do it right or learn how to do it right or get somebody to do it for you., Peace out - ✌️, See you in the next one....

@ToolDemos 3 жыл бұрын

Okay, thanks Daniel.

@danielc.3725 3 жыл бұрын

@@ToolDemos, Your Welcome, buddy, although nice VID, but still, I could not let this one go, & knowing that some one could get hurt, and I'm also a mechanic too.. GOD BLESS, & Take care!!!, 👊👋

@ToolDemos 3 жыл бұрын

You were right to bring up the idea of adjusting the brakes, Daniel. I briefly mentioned that in the video but perhaps I could’ve done a better job explaining it. I certainly would not want somebody to overlook their brake shoes and potentially get hurt. I truly appreciate your professional advice and your prayers, thank you.

@harryberry474 2 жыл бұрын

Daniel C ... It's been my experience that parking brake cables do stretch, I've had it happen to me and seen it on other cars too. You're right though about checking for worn brakes or not adjusted correctly first (typically worn though) but cables can stretch too if you're the type that really reads on your brake handle.