Top 1 Magic Cutting Tool In The World: Face mill CNC

Рет қаралды 660,902

8 жыл бұрын

Top 1 Magic Cutting Tools In The World: Face mill CNC
A face mill is a cutter designed for facing as opposed to e.g., creating a pocket (end mills). The cutting edges of face mills are always located along its sides. As such it must always cut in a horizontal direction at a given depth coming from outside the stock. Multiple teeth distribute the chip load, and since the teeth are normally disposable carbide inserts, this combination allows for very large and efficient face milling...

Пікірлер: 97

@robjones4250 7 жыл бұрын

The US took a ballbearing to a technology expo in Europe circa 1992. It was microscopic. One needed a microscope to see it. We really thought we had arrived. The Swiss took one of them, drilled a hole through it and sent it back to us. I admire a great sense of humor.

@Oberon4278 3 жыл бұрын

I heard the same story but it was France, needles, and they drilled a hole through lengthwise.

@martinfidel7086 2 жыл бұрын

same joke different components.....

@frankmolina3951 7 жыл бұрын

those chips are perfect color, the heat leaves with the chip.

@shoaibkhan7923 7 жыл бұрын

BEAUTIFUL

@cyberneticendoskeleton7559 6 жыл бұрын

Beautiful and satisfactory

@jam1966ful 8 жыл бұрын

Why do they face the large pieces, the one in the video was 1m x 1.20m and quite a depth. It almost looked as if it was being done at the point of casting.

@k.durgaprasadkatta1630 6 жыл бұрын

Amazing work...

@Darion350 8 жыл бұрын

I'm kicking back listening to the drills do their thing with my eyes close.. almost falling asleep when 5:20 happens... I was not amused. O.o

@FastPaull 7 жыл бұрын

I'd like to have some of those shavings from that big machine.

@Gurrumino65 7 жыл бұрын

Interesante. Muy interesante. Solo por esto me he suscrito.

@tomaberisha5688 8 жыл бұрын

stop adding MAGIC to everything. no magic involved in machining, just physics

@Rolingmetal 5 жыл бұрын

The are from another level :)

@neg0dnick769 7 жыл бұрын

Сначала "ну фреза как фреза. Напайки немного необычные" 0:15 ВОУ ВОУ ВОУ!!!

@CNCSKILL 8 жыл бұрын

Good and productive cutters! It has long wanted to buy myself a cutter D80 multifaceted plates! They have a very long life!

@zlatkobobic5029 6 жыл бұрын

Operator CAD/CAM ne valja ,previse se trosi alat ...prema ucintkovisti Nije dobro.

@PsyQonaut 6 жыл бұрын

Imagine having to be the one to rotate the inserts on that thing

@saggufoundryworksbatala9030 3 жыл бұрын

Amazing

@valcye 7 жыл бұрын

I have a file that feels like glass sliding across steel. I love this shit

@nangidkram8652 7 жыл бұрын

At 5.07 the sound is like the theme tune to "Jaws" and the image on the right hand side looks like a shark opening its mouth!

@RajenderSingh-fe7hz 7 жыл бұрын

Nangid Kram

@DjJtown 6 жыл бұрын

Granted, those are the best mills for the money for work load, but they were a pain to set. With some of the face mills we had that were up to 96 inserts and had 4 wipers; it was very time consuming. Switching over to ceramic and also diamond impregnated inserts cut down on wear and increased up time on each mill head

@utooberblooper 6 жыл бұрын

this completely depends on material being machined.

@morgan4xl 7 жыл бұрын

I bought a chinese cnc that was recalled due to an error--there was soy sauce in the hydraulic system instead of oil, then every time I ordered a replacement part it would come in one of those square white paper containers with a small wire handle like asian restaurant take out. Strangely, if you machined a part, an hour later you felt like making another one for some reason.

@indian-dv1rf 6 жыл бұрын

can we use this type of tools for mechanical lathe machine? and how? please help and suggest me.

@mohdmoosa9596 6 жыл бұрын

Exllent

@pooriashams 4 жыл бұрын

The first cut was soooo deep and with a high feed rate. But no smoke. I think the video was played at a higher speed or maybe clean Aluminum

@user-gb4dp9hc7q 6 жыл бұрын

ชอบคับcnc

@FrugalLife 7 жыл бұрын

These tools don't seem much different to the cutting tools i was using in the late 90's. It just seems the type of cnc machines are more advanced

@XtreeM_FaiL 6 жыл бұрын

FrugalLife They look the same, but todays inserts allowe higher cutting speeds.

@darren676767 7 жыл бұрын

While you watch this listen to Wagner Symphony in C major, the louder the better, and half drunk. Beautiful

@TylerBrigham 6 жыл бұрын

that is a monster machine.... what was doing this?

@oxydarkxerxes6665 7 жыл бұрын

why was the firt one mirrored?

@baljindersingh100 7 жыл бұрын

sir if we r using this kind of 6inches dia cutter on milling machine and tips are 10 on cutter and depth of cut is about 3 mm then how much rpm and feed/minute we need.please reply me if possible.I will be thankful to u

@utooberblooper 6 жыл бұрын

online speed and feed calculators are everywere

@AppleBag1000 6 жыл бұрын

like butter

@in3432 8 жыл бұрын

What metal are the actual cutting blades made of please?

@Slisktord 8 жыл бұрын

there is several thousands different cutting tools with different mixtures of ingredients, depending on what kind of metal the customer wants to cut with it.

@Slisktord 8 жыл бұрын

they are all molded from a few different powders from the beginning though, so they aren't cut out from a metal sheet if thats what you thought ;D

@in3432 8 жыл бұрын

Thanks for your reply. I was referring to the yellow/orange squares on the tool. I was curious to find out which metal could take so much stress when cutting and have a reasonable lifespan.

@Slisktord 8 жыл бұрын

IN3 yeah I got that. well as I said they are all molded together with different powders depending on what you wish to cut with it, so I couldnt answer what "metal" its made out of since we coat so many different cutting tools in this gold coloured coating.

@buddyismaname 8 жыл бұрын

+IN3 probably carbide cutting inserts.

@Tirah5 7 жыл бұрын

waiting for Cyberdyne Systems Model 101 after @5:11

@yyabay 8 жыл бұрын

What is the name of the song @7.20 ? Thank you

@ProfessorMuchacho 7 жыл бұрын

Yea whats the name of the song!!!!??????????????????

@cyril3935 2 жыл бұрын

kzfaq.info/get/bejne/irpilpVo17SbZ4k.html

@cyril3935 2 жыл бұрын

@@ProfessorMuchacho kzfaq.info/get/bejne/irpilpVo17SbZ4k.html

@chaosreigns7386 3 жыл бұрын

whats the name of that track that plays at the 7 minute mark?

@karanpradhan2476 7 жыл бұрын

I know that they are moving much faster than they look!!

@rskat501 7 жыл бұрын

Karan pradhan you think?

@jclowe6176 5 жыл бұрын

5:15 sounds like a reaper from mas effect.

@alifmajiid7634 6 жыл бұрын

May you tell me the prise of the meshin?

@climber6477 5 жыл бұрын

~ $300,000 +

@user-lo1nv9pb3c 6 жыл бұрын

사이즈및 구매방법알려주세요

@Peppins 7 жыл бұрын

Why water isn't used? For example see the metal color at 3:15, too hot...

@EternitP8 7 жыл бұрын

You usually don't use coolant when milling steel like this. The inserts are made to take the heat. If you apply water to them it may cause them wear out prematurely.

@deathknight014 7 жыл бұрын

Peppins32 you also run into the issue of the chips cooling faster than the machine can spit them out. usually results in a bad cut or chips being stuck to the material.

@nedkelly1306 7 жыл бұрын

crap camera angle, I'd rather see the tool cutting than just the chip extraction in the slo mo

@omzig18 7 жыл бұрын

I'm no machinists so maybe this is obvious to those of you who are but what is the purpose of removing so much material? Seems like you could start with a smaller block and save your self some time

@andrewmoore6108 6 жыл бұрын

omzig18 you have to have something to hold onto while you machine the part. Sometimes adding material is the only way you give yourself something to hold onto. Most of these videos are just showing the abilities of the tool though so they take a massive unnecessary cut under ideal conditions. You usually don't take cuts like these very often

@frankmolina3951 7 жыл бұрын

the other hand the sparks are bad

@XXgoblinmonkeyXX 6 жыл бұрын

i gotta call bullshit. they don't list the type of material they're cutting 300 series stainless cuts differently than 4140 pre heat treat. for all i know they cold have some mild carbon steel they're flying through .

@christianregitz5791 6 жыл бұрын

How to easily make money on youtube.

@RealNotallGaming 7 жыл бұрын

AHAHAHAHA NICE AVP XDDDDDD

@WelLRoundeDSquarE 8 жыл бұрын

wow really? i was using this tool 10 years ago. got anything new to show us? While your at it, show us some better programming skills. you cut more air than metal.

@poppogigio1848 7 жыл бұрын

I'm pretty sure that 0% of this is actually him cutting anything. It's all just other people's videos he stole and combined into this.

@ferasalhelo184 5 жыл бұрын

WelLRoundeDSquarE في ميت

@utooberblooper 6 жыл бұрын

nothing magic about a face mill,they have been around for 100s of years and are used daily in machine shops around the world.

@chribo_h2941 7 жыл бұрын

GAIL! =)

@marcelldavis6426 6 жыл бұрын

jäääääääscho

@lostinlife647866 6 жыл бұрын

What’s so magical every video you post is magical !!!! Wanna see some magic tag dah I just unsubscribed and now I don’t have to watch your magical videos anymore !!!

@sir.spliffalot_mobile4968 7 жыл бұрын

well top 1... 😐

@lorenzomarinelli84 7 жыл бұрын

poi è inutile che date parametri di 200 m al minuto , perché si è possibile su un metallo davvero tenero , ma provate a fresare uno stampo :) 90 metri sono già tanti

@HellTriX 6 жыл бұрын

I am offended by how much metal and how fast is removed by these tools.

@HellTriX 6 жыл бұрын

Ahaha! This made my day! Thank you.

@Ryan.B420 7 жыл бұрын

6:20 lol thats not ok

@maysonnaylor4678 7 жыл бұрын

in college we had an older guy who insisted in running only 3 inserts on a 6 insert sandvik button facemill. ran it around 1200 rpm and feed it as hard as he could. "the sparks are just impurities being burned out. when he caught the oil soaked floor on fire i told him not to worry. it was just the impurities coming out of the wood.

@Ryan.B420 7 жыл бұрын

VANTA hahaha that's fucking great

@andrewmoore6108 6 жыл бұрын

I though it might be a ceramic insert in inconel or something like that. I know heat plasticizes material but this just looks like a mess.

@marufhidayat9692 6 жыл бұрын

Magic? -_-

@albertcyphers1532 5 жыл бұрын

This must be an advertisement for these cutters. Because no one in their right mind would would make these rediculous cuts especially if they buy their own tools and cutters

@adamantprize12 6 жыл бұрын

I hate how you zoom in on those videos you stole from other chanels,. Just so you can stick your own watermarl there.

@occhamite 6 жыл бұрын

"Top 1 Magic Cutting Tool In The World ..." ? Why is it people can't write even grade school English? How about at least vaguely grammatical, such as "Top Cutting Tool In The World ..." or " # 1 Magic Cutting Tool In The World ..." ?

@masterVideoContent 6 жыл бұрын

that does not even look like a steel or a hard steel... what is the metal your cutting.... your trying to sell a tool but you cant really make us feel like it will work for us. i cut hot rolled steel so i need good inserts.... looks like a cheap aluminum your cutting. not even in showing the finish.