No video
Top 10 Automotive Tools Part 1
Рет қаралды 88,977
Күн бұрынMake sure to check out Themechanicman92 at / @dansrestorations
Here I am listing my 10 tool topics an auto tech would use that a collision specialist wouldn't really find themselves using. I hope you all enjoyed. If you did Please LIKE, Comment, and Subscribe. Thank you all for your support!!
@bozidar.dimovski 6 жыл бұрын
Bill Burr also leans with his elbow on mic stand same as you on the bench. Now to mix tool talk and comedy in a routine and then do impressions of him in his comedic style..now that's a winner. The tool talks are great, thanks.
@TonyTheTechnician 6 жыл бұрын
Lars Persson haha that would make for a great video. Thank you 👍🏻
@jerryjoseph1866 6 жыл бұрын
I stumbled upon you’re channel and I really like the content...thank you for all the great info
@TonyTheTechnician 6 жыл бұрын
Jerry Joseph thank you I’m really glad you enjoy!!! 👍🏻
@bobshouseXXX 5 жыл бұрын
Did you hit the lottery with all that new stuff? Clean tools, clean garage, you should see my mess. Like the vids
@TonyTheTechnician 5 жыл бұрын
Haha had just bought the house new and at the time all those tools were provided to me for free from the college I went too
@partya11night20 5 жыл бұрын
Starts at 3:30...
@richardbates2367 2 жыл бұрын
I have a duralast magnetic spark plug socket it's a 3/8 Dr 5/8 I believe..
@airratchet7313 6 жыл бұрын
Only use a pickle fork on a joint you are replacing because it damages the boot and ball in the socket. I have never owned a pickle fork and get joints separated without breaking a sweat, with a front end service set. It comes with varies pullers that are used with an impact and the joint is not compromised.
@TonyTheTechnician 6 жыл бұрын
Joe Hearn ya I use the service set as well and most the time I can get them out with it or a hammer. Pickle fork is my last resort but still a great tool.
@richardbates2367 2 жыл бұрын
Infared thermometer is also almost ideal for checking misfires easy to tell if a cylinder is not firing..
@TonyTheTechnician 2 жыл бұрын
Absolutely 👍
@thebordernow 2 жыл бұрын
Learning a lot - thanks for the automotive tool tips. (Here's a tip back - at 12:30 & 15:30, it's "infra-red," not "inferred" to refer to the light spectrum it's using, not how the temperature is determined.)
@paintballjunkie65 7 жыл бұрын
A video series that would be awesome, and help your channel as well, would be like "5 tools that are helpful when doing an oil change" or "Tools that are helpful with (insert job here)". Just because i have tried talking other people into working on their own cars, but they never know what tools they need, or how much they cost, to see what the savings would be over time.
@TonyTheTechnician 7 жыл бұрын
TheCodFather that is a very good idea. Thank you very much. Not just for watching but for sharing your ideas as well
@rustyjeep2469 7 жыл бұрын
I never really understood the point of those angled head wrenches but can I see how they would help access things like suspension mounting bolts. Might have to get a set of those, in collision repair it's actually very common to have to R&R damaged suspension parts.
@TonyTheTechnician 7 жыл бұрын
RustyJeep oh ya i could see how those could be helpful for you. thank you for watching and commenting!
@alexandersolon365 6 жыл бұрын
Alot of brake caliper brackets have bolts that are partially blocked by either suspension or lines. Very good for those.
@zyortech 7 жыл бұрын
Good to know, thanks for the info.
@TonyTheTechnician 7 жыл бұрын
roy vtecruz thank you
@ClaytheBMXer 6 жыл бұрын
I am debating between that Matco spk6 spark plug sockets set and a Gearwrench/KD set with less coverage. Do you know the applications for the different 9/16" sockets? The 5 piece Gearwrench set only includes one. Thanks.
@younggelo4506 6 жыл бұрын
welp this video is good for my homework
@TonyTheTechnician 6 жыл бұрын
Gelo Bautista that’s great to hear. I’m glad it was helpful
@MrLutzyboy 6 жыл бұрын
Great Video. Keep them coming!
@TonyTheTechnician 6 жыл бұрын
Jim Lutz thank you will do! 👍🏻
@MrLutzyboy 6 жыл бұрын
Just an idea...What is the verdict on used tools. I come across lots of posts on craigslist and FaceBook Market Place for Mechanics that are selling their tools. Some are retiring some for other reasons. How can one know how much to offer for used tools?
@kowalski363 3 жыл бұрын
Great video
@TonyTheTechnician 3 жыл бұрын
Thank you
@chrislee2083 5 жыл бұрын
Good information, thanks 😁
@TonyTheTechnician 5 жыл бұрын
Chris A thank you 👍🏻
@kylefraser5490 7 жыл бұрын
great video dude keep up the good work !
@TonyTheTechnician 7 жыл бұрын
Kyle Fraser thanks man. thank you for all the support!
@myk3ch1chas196 6 жыл бұрын
Great vídeo but... The link for buy it?
@nightmaremike1092 5 жыл бұрын
That matco brake set you got the part number
@TonyTheTechnician 5 жыл бұрын
Nightmare Mike btso10 or btsg10 depending on the color you want
@nightmaremike1092 5 жыл бұрын
Ty brother im learning alot appreciate it. Much love
@TonyTheTechnician 5 жыл бұрын
Nightmare Mike thank you I’m really glad to hear you find the videos helpful!!
@pedal2dametal686 4 жыл бұрын
Part # , make or model on first puller(vibration,harmanic)? Thank you
@richardbates2367 2 жыл бұрын
My compression tester is a actron/sunpro it's alot more basic than that kit... basically all one piece..
@DOYLECLEVERLOBE1 7 жыл бұрын
Nice overview. Maybe you and Themechanicman92 can come up with a name for the two of you like the Big 6 did.
@TonyTheTechnician 7 жыл бұрын
DOYLECLEVERLOBE1 haha true, that would be cool!
@DansRestorations 7 жыл бұрын
DOYLECLEVERLOBE1 was kinda thinking the same thing hahaha
@johngibson3594 7 жыл бұрын
Thanks for another great video
@TonyTheTechnician 7 жыл бұрын
John Gibson thank you im glad you enjoyed
@greygoosemafia 7 жыл бұрын
speaking of bearing drivers, isn't it all the same stuff? If you're just pounding on it.... why buy a nice one? Google is your friend ppl lmao.... dont be afraid to google specs and specifics on various vehicles. theirs a lot of information out there. ALSO those major brands..... otc makes half the that junk anyways... save you're self some money and buy otc. order off amazon, save tons of money
@TonyTheTechnician 7 жыл бұрын
Richard Cowtails lol exactly my point. they are all just machined discs and do the exact same thing. no sense in spending a bunch of money on a set like this. once again thanks for watching man!
@greygoosemafia 7 жыл бұрын
Was helping my dd with an amx and the oil filter was RUSTED on there lol. I punched right through the filter while its still stuck on the pump which is a piece of the timing cover lmao what a mess!! lol
@TonyTheTechnician 7 жыл бұрын
Richard Cowtails lmao damn thats crazy haha
@garyclemons1129 7 жыл бұрын
good job bro keep up the good work
@TonyTheTechnician 7 жыл бұрын
Gary Clemons thanks man, will do!! Thank you for watching!
@asmautollc 7 жыл бұрын
Do you have a Power Probe at work?
@TonyTheTechnician 7 жыл бұрын
asm154 1 yes I do and I meant to bring it for the video and i forgot the damn thing in my toolbox lol. Sorry about that.
@asmautollc 7 жыл бұрын
No worries!
@MrLong-tg9ss 7 жыл бұрын
damn you got all the tools
@TonyTheTechnician 7 жыл бұрын
Rryan Long lol trying to grow my tools. thanks for watching.
@MrLong-tg9ss 7 жыл бұрын
TonyTheTechnician man you got to many tools 😂
@TonyTheTechnician 7 жыл бұрын
Rryan Long lmao thats what my wife says
@nicholasbrown6481 5 жыл бұрын
You wouldn't catch me using a pickle fork for anything. And HF has a great air power brake bleeder vacuum for 35 bucks. Same as mighty vac. Fraction of the price
@tommyross2959 5 жыл бұрын
Prart number, and maker would be nice.
@4dirt2racer0 6 жыл бұрын
is that ur shop?? the benchtop even looks pristine.. shit u should c y my shop, i had to keep replacing my worktop till i got a piece of 10 guage ferritic stainless so its still magnetic bent up for a bench that was the best move i could have made there
@TonyTheTechnician 6 жыл бұрын
Travis Miller haha nice. Ya it’s not that nice anymore. A lot of things have changed since this video was made.
@nhampton1115 4 жыл бұрын
looking to buy my man some tools for Christmas and his birthday but what is the use of the video if you don't show where to buy the tools 👎😡
@TonyTheTechnician 4 жыл бұрын
My apologies I was just starting out on KZfaq when I made this video and didn't even think about linking any of the tools. If you check out my newer videos I have all my tools I suggest linked in the description of the videos now. Thank you for watching and I hope you find some tools you think he will enjoy. Thank you for bringing that to my attention. I will try to come back and edit the description for the links in this video. Love the anklet you have as well.
@il94z12 7 жыл бұрын
That oil filter claw is a waste of money. The best one and really cheap one is the Husky one or the old school blue point one
@TonyTheTechnician 7 жыл бұрын
A_aron 37 well I got that claw from matco for free so I can't really complain lol. are you talking about that black claw one with the flat arms?
@DansRestorations 7 жыл бұрын
hell yea man
@TonyTheTechnician 7 жыл бұрын
Themechanicman92 haha thanks bro. hope your enjoying. im almost half way through yours.
@johngibson3594 7 жыл бұрын
Some of your vids are not uploading right
@TonyTheTechnician 7 жыл бұрын
John Gibson what do you mean. is this video not playing right?
@TonyTheTechnician 7 жыл бұрын
John Gibson maybe your talking about the videos that you see pop up that are like 2 or 4 min long. its bc i record clips and then upload them as private to youtube and then combine them all into one video but for some reason youtube acts funny and takes one of my clips from private to public lol. then people see a part of a video that I'm not ready to post yet lol
@TonyTheTechnician 7 жыл бұрын
John Gibson or is there a different issue that you are seeing
@relyenterprisestx 6 жыл бұрын
Good took info but too long. Get to the point 35 min?!?! Should have been 5 min. Thank god for the double tap fast forward.
@frugalprepper 7 жыл бұрын
Are you insinuating that my Hyundai Elantra is low quality because it has drum brakes? LOL
@TonyTheTechnician 7 жыл бұрын
FrugalPrepper lol not at all. just stating that we do still run into Drum brake systems on newer cars. lol thank you for watching
@pssst3 7 жыл бұрын
The title doesn't match the video or its description, butvregardless, the top tool that any mechanic should prep, maintain and care for is his brain.
@TonyTheTechnician 7 жыл бұрын
pssst3 your right your brain is your biggest tool but we are talking physical tools in this video and if you check out the other half of the video created by themechanicman92 you will see the title and description fit the video. We are talking about 10 tools automotive repair uses that a body specialist wouldn't really use and vise versa. Thanks for watching!
TonyTheTechnician
Рет қаралды 41 М.