My number one mistake for a long time in the beginning of my hi-fi quest was: ‘Mistaking brightness for detail.” If you can’t listen for hours and still want more, take it as a bad sign.

Number 1 mistake is.. Not listening to your music and worrying about your system too much, sit back and relax..

02:50: Me: **boiling 50lbs of rice** "OH COME ON!"

My biggest mistake was not buying more used records in the late 90s and early 2000s! People were just practically giving them away. I got Pink Floyd Dark Side of the Moon for $2!! It was a golden age!!

Ron your list is great. One of my mistakes was not making sure my streaming service/devises were set to maximum quality. Free upgrade in source material quality.

Thanks Ron, #1 particularly resonated. Having purchased a new hifi rig for the first time in 5 years, I too read the reviews, and used those as a basis for auditioning, but my most trusted thing were my ears. I also took copious notes of what I was hearing as I auditioned for speakers. Being able to compare the same few tracks at different stores with notes of what I heard was incredibly valuable, and left me choosing a niche New Zealand manufacturer - Theophany - that I enjoyed more than Dynaudio, Monitor Audio, B&W, KEF etc. I was gob smacked when the staff told me hardly anyone does this, so I'd add that as a clause to your #1, trust your ears and if auditioning, take notes on what you hear! Cheers from Melbourne, Australia, Peter

Great list! I mainly connect with the advice on placement. I have a relatively cheap system and correcting the height and toe-in made such a huge difference I’m starting to think that it’s the most important thing.

The number one mistake (and yes I fell for it to a degree) is listening to your rig in a way that the actual music becomes secondary.

I used atabite - high density filler to increase the the mass of my speaker stands. Improved the sound and very pleased with the outcome.

#8 is huge. I’ve found lots of companies have good service, but Sweetwater has really blown me away lately. They’re unbelievably helpful. Awesome tips!

Great advice. I've been into audio gear for over 30 years and this is a good list indeed.

Didn't think it'd ever happen but a couple weeks ago I got some transparent cable and thought it sounded awful. Turns out I had my polarity wrong and my L/R channels switched. I was just so excited. Sounds great again

Just something to consider. Try covering the top and sides of the speaker boxes with folded towels or blankets if you have full size speakers. It just amazes me at the difference this makes. Speaker housings DO transmit a LOT of sound.

The speakers away from the walls advice doesn't necessarily apply to all speakers. Front ported speakers like Klipsch Cornwalls are specifically designed to to function against a wall and/or in a corner. That is actually why they are called "Cornwall". BTW, Christmas fruit cakes also make excellent sound deadener for hollow speaker stands!

Well that's just GREAT. Just as I get used to all of the subjective, inane, mumbo jumbo stuff about audio, you come along with an objective, common sense approach. Thanks!

Listening to new music is a must , i do it when listening to my high end SQ system in my truck. It brings me back to saying to myself this sounds amazing !! I love getting that immersive feeling.

The new music advice is #1 for me!

I would say "room acoustics" and "consider reviewers, but trust your own ears " to be two of the most essential, especially when just starting out. Then, "buy new music" is an excellent idea for when your system begins to sound "stale". It also keeps your appreciation for music alive. I use Tidal for exploring new artists. I can try them out before purchasing, and have made many new discoveries that way.

Your 10 suggestions are excellent! I would add: when you record music samples during equipment test (especially speakers), that is THE most helpful single action to me. Keep them coming, please!

Love it! Great advice. Another is don't look at gear individually, break your system into parts: room and speakers; speakers and amp; turntable, tonearm, cartridge and phono preamp, for example. Synergy in each group will make the sum better than the parts.

Great downright sensible list of tips! I completely agree.

Use what is marketed as sandbox or playground sand. It's been cleaned and helps to insure you are not bringing organic matter or living organisms into your house.

Hey Ron Happy & Blessed New Year bro to you and your family. Nice video post, glad you're now being sponsored and great to have you back.

just received the IsoAcoustics Aperta Isolation Stands to try out. Will look into filling out my stands next. Thks for the tips!

Trust your ears but listen to live bands whenever you can. It's easy to forget what instruments and voices sound like in real life.

Great video Ron!!

you deserve all the love of the world. man i watched this video 2 days ago because i wanted to adjust my speaker position. since a week a had the impression something is wrong at my setup.. i spend the whole day moving my speakers and my chair today (mainly listening to vinyl with my turntable). at night i decided to put on some spootify music and listened to an herbie hancock album (the same i used for testing during the day). and i was completely confused realizing that the trumpet came out of the left speaker...on my record it came out of my right speaker. i eminently jumped of and jecked my cabes and realized that i plugged in the cables from my turntable into the preamp the wrong way (red to white and white to red) . what can i say, after changing it, EVERYTHING is GREAT! thank you very much for that hint :)

Great advice Ron. I make the same mistake all the time with polarity too!

Great tips. Thanks Ron. Glad you didn't say to fill speaker stands with tuning forks.

really enjoyed the video & totally agree with your number one .. hearing is believing .. that is most important to everyone...

Hi !! Great video! I have made many mistakes after changing my audio system from vintage stereo to up to date digital audio receiver 5.1 . Due to a budget limitation I kept using same 4 speakers I used in The A and B speakers terminals of my stereo. So I assumed that the same speakers position will be good for the Denon AVR1611. Totally wrong and result was terrible. Later on I added a center speaker and setting the other speakers in the right position thing got better. LOL!

Some really good advice I would add if you can hear gear in your own setup especially speakers

Great advise Ron, but don’t ever forget if you have a local shop, build up a relationship with a local dealer. Great Local dealers are priceless for their experience and when you build up that relationship, spend money with them, they will allow you to take products home. I’m able to do this and no I don’t put a credit card or anything down. I walk in tell them what I would like to try, like the Meze Emphyreans and walk out. I try and not waste their time, but I have been dealing with them for over 10 years and everything except my current turntable and one of my two cassette decks were bought there. A great dealer will tell you exactly what Ron said , they won’t tell you what something sound like, which is why they will let you try the equipment out in your home and they will offer services that will bring them out to your home and set the equipment up for you and tune it to your liking with measurement equipment (and set up the room treatment based on the measurements and use lasers to fine tune placement if you prefer this, I have always set up my own stuff. Keep it coming Ron your work, the production and guest are getting better and better. I can’t wait to see your Axpona coverage if you are going this year, which might be hard with the two little editions to the family.

Words of wisdom. Thanks for pointing these things out to everyone!

My problem is I always buy music lol. I loved the tips. I’m building a budget hifi system. Thanks for the info!

Solid advice 👌 I filled my Acoustic Energy STAE1 stands with LEAD! Spiked to floor and pea sized blobs of BluTak under the KEF LS50s. Heavenly ;-)

Heigh Ho is such an excellent record. Great songs, really well engineered and mastered.

I threw my old out of the house. Best tuning tip. Finally, listening to music is fun again 🕺🏼🕺🏼🕺🏼 Greetings from Vienna

great tips, speaker angles are another biggie, I like my psb cs-180s straight forward facing in a near-field listening setup, roughly 2 meters apart.

As one who has spent most of my life MAKING MUSIC (that you guys might listen to) I endorse all 10 points.... it's sound advice ( pun 🙂) ..... I have had controversial arguments on my channel over "analog" versus "digital" ..... and after it's all over .... people simply have to go with what sounds good to them.... but they should also accept that psychoacoustic perception affects their conclusion and admit that scientific testing is the only 'ultimate reality' of what actually exists in the world...... as a University lecturer in Electronics (and with background in sound engineering and music) it is my job to EDUCATE the public .... which is how I ultimately ended up on your interesting channel.... good show .... keep it up....

The biggest mistake I made was when I first got into the hobby and I kept buying and selling stuff like crazy. I had some good stuff and ended up selling it for stuff that wasn't nearly as good. I was like a junkie trying to get my next fix.

HA! Polarity definitely got me! Left and right placement too! when setting up I accidentally swapped my active speaker placement, AND put the wrong polarity on top. It took playing a pc game to find out what was going on behind the strangeness. Enemies were ACTUALLY coming from the left but I was always looking right, with the weirdest sound environments. Highly recommend

A couple of months ago I bought some new intereconnects to improve the sound of my system. When I went to install the one that went from the DAC to the preamp had the DAC output for one channel and the coax DAC input connected to the preamp!! The coax input was right below the pair of analog outputs. never underestimate your ability to screw things up The balance problem I thought I had with the new dac was fixed!

The biggest difference I have made to my system is the addition of audiophile power cables, I have modest system comprised of Cambridge, NAD and Yamaha components and Polk audio speakers, but decided to splash out on some cardas clear beyond power cables, for them, as of course the power going into the components is the most important thing, the difference is amazing, I was instantly enchanted.

A recent mistake I made: I’m just getting back into audio and recently upgraded my speakers from some ancient Polks to the Klipsch rp600m. These were the first speakers I’ve ever owned with dual inputs. At some point as I was playing around with placement and cables I knocked one of the interconnect bars loose. My ears told me something was wrong but it took days to figure out.

@9:18 once you get things dialed in use some sort of marking system to make positioning them again easy. I used dots of clear nail polish (on my hard floors, some dot of velcro may be required for carpets) to avoid having to measure or experiment every time I want to listen. I have the best position marked and its no fuss to set them up. I found that when i had to measure every time it simply cut into listening time enough I was hesitant to do it. Now it is so easy and simple it only takes 1 minute to position both towers correctly in a repeatably good position.

Great video! Love all these. I would say for #10, sometimes beginners don't know what to listen for. Or think "lots of bass" is better, or think "bright = detailed." So it takes time to learn and get accustomed to good sound and what is good and what is not. Like wine newbies not knowing what to evaluate and how to tell a $5 bottle from a $50 bottle. You may have a video like this already, but I would recommend some content around "how to train your ear" and "what to listen for" for people to get better at evaluating speakers, acoustics, and equipment. Keep up the great work! I recently found this channel and quickly subscribed.

I once owned a pair of Bowers & Wilkins DM2 speakers, 1972 vintage. They looked gorgeous and would normally sound gorgeous too. However, Twinkle toes here decided to fiddle around with the speaker cables behind the system while the amp was still on. I'd bargain that most enthusiasts who are familiar with these lovely speakers know what's coming next. The speakers are a three way design, sporting an 8" bextrene coned woofer, Celestion hf1300 tweeter and, last but not least, the venerable, but rather delicate, Coles 4001G super tweeter. I murdered them both, I did. Yes, I am an idiot... So, having cheerfully slaughtered the original forty seven year old items, I ordered a hand built replacement pair from Falcon Acoustics in the UK, and attempted to install them myself. This.... was a mistake! I managed to boil the brand new and rather expensive replacements to death with my soldering iron. It was at this point that I decided that the DM2's were probably not meant for a big klutz like me, and I've been rocking a pair of Mission M71's ever since, and they still work, because the Missions are 100% 'ME' proof... 👍🖖

Excelent video bro, greetings from Mexico City!

I have my bookshelf speakers sitting on some bricks I found in my back yard with folded paper towels for noise isolation. No need to worry about a hollow speaker stand when it's filled with hardened clay.

Amazing video thank you. I'm subscribed!

I have some metal hollow equipment stands - a bit fiddly to fill with sand/rice, so I drilled a couple of small holes in each 'compartment' and filled with expanding foam, which may be preferable to the 'low mass' brigade anyway.

CD's, Vinyls are great source of music but youb need a DAC. Tidal, Apple, Amazon Music has a large variety of songs for you to fall in love with your rig again. This is a must for any audiophile.

great tips!, yes always listen to new music. and different formats. my tips...let your ears "zero Out" before a listening session, say some thing Lo Fi or mono, listen with lights out..

Fabulous video Ron. Oh yes we’ve all made mistakes but they’re usually fixable unless you’re greatly out of pocket - it’s sometimes a FOMO thing ain’t it. Auditioning gear is a great idea if it’s possible and do take some of your music with you when you do... ✌️🇦🇺

Spikes only are never right! Speakers should be decoupled from the floor with soft material. Not just anything soft. A sylomer type is ideal. The sylomer feets must be adapted to the mass of the speaker. Might be used in combination with spikes though if there is a carpet under the speakers. It's amazing how widespread the spikes BS is.

Hay Ron, great video and some good tips, but one I'd suggest should be near the top, at least is GET YOUR SPEAKERS OFF THE FLOOR. That is, if you have large bookshelves like I do (vintage ADS L810 speakers) that stand 25.5" high or so, get them off the floor onto low stands of 12-15", ideally tilted back slightly about 3* for proper dispersion. This is also to reduce the bass node/boominess that can occur when speakers sit right on the floor. Too many do this and then wonder why their bass is boomy. This goes for most speakers, bass reflex or acoustic suspension or passive radiator is that the upper bass can get over emphasized and with some speaker designs, can sound chestiness in the mid to lower midrange area, not necessarily a good thing. But in the real world, some of us don't have the option (at all) to move our speakers out into the room as far as you'd like. For me, it's due to doorways and a small room I have to work in (stereo sits on the LONG wall as it's the ONLY spot for it as I have the entrance to the front hall, and the kitchen at both ends of the living room to contend with). Besides, it could be much worse. I do have them at minimum 15" from the back wall so that helps, even if they sit close to the corners, but just getting them OFF the floor helps. Bass is tight, articulate and musical. Anyway, a good list overall.

Exellent presentation, congrats on your great articulation as well.

When is the Klipsch stock vs modded vid coming? Really looking forward to it!

Digital candles? I'm more the analogue candles kind of guy.

ISOAcoustics desktop speaker stands were one of the best investments in my desktop setup. Immediate positive difference.

I have to say a big thank you not just to you but to also KZfaq algorithm for bringing you to me, because that was some excellent excellent information, you couldn't be more right with your number one choice because I auditioned two previous set of speakers before I finally found the ones which were right for my ears considering my small room acoustics,! One set of them was twice as much as the ones I finally settled on, room acoustics and audios are more subjective than one would have assumed, would love to get some extra info from you or from anybody for that matter, would you recommend unscrewing my standmount spikes which are going into my thick carpet, do I really need them or is the plate which is sitting on my v thick carpet good enough?

You’re awesome thank you very much I can’t wait to see you and Randy tackle each other again, I’m looking for a 12 inch shield affordable subwoofer that does not have a ginormous foot prints, any suggestions sealed subwoofer

lovely video there mate! well i can honestly say i have done all of the above mistakes...without a doubt..one very important thing is the speaker toe-in angles or how far apart between they are can make a strong audible difference. Time is the best teacher i guess. I do really need to invest in good speaker isolators for my Tannoy Revolution speakers. Should have done it long time ago but i did not because they were placed on a carpet. No vibration issues there but now my living room has floorboards so its like a one way street. Must get those isolators asap

Funny thing about this video, I bought a set of metal stands from Bob and Ron’s WWS back in 2007. They cut me an awesome deal on floor models. I went to the Lowe’s right next door immediately after, bought sand, filled them when I got home, and mounted B&W 685’s to them and connected my NAD C326 (both also purchased at WWS). Still have this gear and it still sounds awesome!

I have an amplifier and speakers with SpeakON connectors. Never had the polarity issue.

Since when are we now ‘reaching out’ when we contact anyone? It used to be reserved for when someone was in a desperate state etc. All of sudden people in the UK use it at work now. Before we used to say can you talk to, call/contact, get in touch etc, but know I am reaching out all the time. I feel very compassionate all of a sudden. Apart from that great video! 🤗

Great tips!

I'd love to see a video on recommended speakers that CAN be placed on or next to a wall. There are just some times that I want good sound and cannot places speakers away from a wall.

A cheapo tip from the UK. - source was HiFi World iirc. Go to Maplins and buy their hard rubber feet as used by DIY radio nuts. They're about 50p each and really do the trick at isolating your CD player, turntable etc. They're exactly the right diameter, they work really well. There's only one problem, Maplin went bust a few years ago. Perhaps they should have called themselves "Maplin HiFi" and sold them at £150 a set.

My original (audio) sin was the same as most people's. "Plug & play"! It took me years to figure out that I had a menu built into my gear.

Great vid 👍✌️

I think the first mistake audiophiles make, is assuming they're an audiophile.

Fantastic list and great video Ron. Love your content brother.

Hey, great tips, thanks. I have kef t301's . Wall mounted, so the rule of "away from the wall doesn't work me" . What's your input on that? Any way I can make it better. I haven't installed them flat, I have made a little toe in even on the wall mount bracket.

You have Lord Huron and Ben Howard on your wall wicked 👌 although you doo have floyd as well 😩

Good advice, particularly number 1

My biggest mistakes ALWAYS revolve around buying speakers only from good reviews. In some cases I didn't know what I did and didn't like in a speaker. In others I didn't have a dealer where I could listen to the speaker. BUT there have been a few cases where the brain got in the way of the gut. I've gotten VERY lucky in about the last 15 years though and have a outstanding dealer less than a mile from my house. They have a good selection and STRONGLY encourage listening before purchase. They go so far as to tell me to bring in my sources to see if what I'm thinking about will work well.

Great video

I’m liking your videos dude. I’m right there with ya on the new music buying. I hit shuffle and let TEAC HR PLAYER take over

Pretty good advice. Agreed filling speaker stands is recommended. What to use is debatable. Best way to determine height of your monitors is first to determine at what position your ears should be in relationship to the drivers. I first recommend listening to your speakers at different heights by sitting at the normal height in your seat then sitting up or using something to sit higher in the seat to help you determine the best location of your ears to the drivers. This will vary from speaker to speaker because of speaker design and cross-overs. You should notice better coherence of midrange bass to higher frequency's. Better tonal balance and detail. So once you determine the best listening height of your ear to the speakers, you have to determine the best height from the floor. This is determined by bass and lower midrange detail. This is where it gets challenging finding the right height of stand, or go by manufactures or audiophiles recommendations. Speaker placement is the single most important aspect in getting good sound. It is both art and science and takes much patience. But spend sometime moving your speakers around at different distances from walls to find the right balance of sound. You will find a place that creates the best overall tonal balance AND when you really know its right you will hear the least issues with room acoustics. That's right you can tune out coloration's of the room with speaker placement, this is when you know you have it right, when you dont hear the room. Everything else he recommends its pretty good and much of it is trail and error. There are many misconceptions with audio and audio tweeks, they all effect sound quality, but the real challenge is finding tweaks or mods that undoubtedly improve the sound and not just change the sound to compensate for weaknesses of the system. To often I see people try things thinking that its better when its really masking other shortcomings in the system. listen to the whole bandwidth and determine if its improving the sound across the board, or is it emphasizing parts of the spectrum that colors the sound that allows you to hear more detail only in that area of the music. This takes time and patience to learn but try not to be fooled and really analyse what its doing before you make the investment in that accessory.

New music should be number one. The internet makes this so easy.

With new gear, listening to my go to evaluation tracks it sometimes makes me scratch my head trying to understand why it sounds so different till I realise the channels are switched out. Right connectors are going to left input/output and vice versa. And of course, I can't forget about those damned impulse buys...as well as sidegrades

OK, well I'm into home theater, so I'll guess based on experience what I think is good. Ummm... If you hear the phone ring in a movie and it makes you get up to answer the phone, If you hear a police siren in a movie, and you're terrified the cops are coming to get you for some reason, If you are watching a gangster movie and you think you're being threatened by somebody (in real life, maybe they're outside) when you hear bad language and violent conversation, if you hear a doorknock and you get up to answer the door, and if you hear dogs barking in a movie or TV show and you have to rewind and play back and pause the same clip five times just to be able to figure out that It's not coming from your neighbour's yard (and it still sounds like it is, even once you're convinced). That's what I'd call good.

Hilarious! Happy New Year!

Just might go to World wide stereo today!😇🤗😉😬

My thoughts on your top 10: #10. Decouple the speaker from the ringing stand with soft feet designed for the specific speaker weight and weight distribution. Consider that speaker enclosure vibrations are not like hammer strikes and ringing is also dampened by the weight of the speaker. #9. Most speaker manufacturers will agree with you but I would recommend trying every possible height above ear level, try flipping speakers upside down when they are higher up. You might be surprised. You will likely lose bass support from the floor boundary - experiment with moving speakers closer to the back wall. #8. See #9. #7. Yes -Having speakers wired out of phase with eachother will make the sound weird and diffuse. If there is anything at all that you like about that sound -consider all of #3 and #5! #6. Use adjustable spikes only under the stands if your carpet is so fluffy or your floor so uneven that your bookshelf speaker otherwise will be tilted in any direction. Your speakers will be standing still and not transmitting vibrations to your stand or floor if you use properly designed soft feet. Don’t bother with feet that don’t come in different sizes tailored for specific speaker weights. Confused? -Ask a friend with a good understanding of physics. #5. Consider consulting with a professional acoustician -not one specialised in noise reduction but in psychoacoustics. It might seem costly but could save you money and time and give you valuable insights. #4. Lacking recordings? Try Tidal! #3. Walls are the trickiest part of music reproduction in the home. View any reflective surface as a potential disaster for the end result, but keep in mind that the proximity of walls to the speakers will affect the bass. Moving the speakers too far out into the room will likely make them sound unnaturally lean. Some distances will make side wall reflections more annoying than others. Try to keep the speakers at 23 degree angles (46 for both) from your listening position, but if that puts them at disadvantageous distances from reflective side walls it might be better to compromise with these optimal angles. Soft materials absorb the reflections and the floor reflection can be blocked with a well positioned coffee table. A long haired carpet covering the whole floor will lessen the reverberation time in the room. I like to use several layers of drapes for dealing with the wall reflections. Don’t forget the wall behind your speakers! Also see #5! #2. Yes. Listen before buying! #1. I would say use reviews to sort out equipment with obvious flaws that the reviewer has backed with measurements. Don’t pay any attention to how much a reviewer likes some gear or how well he seems to be able to describe sound. Forget about good-better-best and think of gear mainly as functioning properly or being flawed. Now, let’s see if I can make a top 10: #1. SET THE GOAL Figure out if you like how unamplified, live music sounds and you want to come as close to that as possible at home, or if you want a very specific sound on everything that’s played. Not being clear about this is a mistake that can make your journey unnecessarily confusing. #2. DON’T BUY BETTER GEAR Don’t buy anything new until you have localised the main flaw in the audio result from your current system. Looking for ”better” without a clear understanding of what, very specifically, you don’t like about your result is sure to make you poorer and no wiser. Resist shopping for ”better”! #3. DON’T THINK OF YOUR SYSTEM AS SOMETHING SEPARATE FROM THE ROOM Learn to view the room and speakers as one unit working together, although the room will mainly be fighting the speakers. Worry less about electronics! #4. AVOID SMALL ROOMS Put the stereo in your biggest room if possible, not crammed in a small room. Softer walls are generally a plus for the bass. #5. DON’T LIE TO YOURSELF No wishful thinking. Be honest with yourself about the results and keep high expectations! Try headphones to hear what the music sounds like without interference from reflective surfaces, but be aware that headphones can have other serious flaws! #6 COLLECT SOUND REFERENCES Go to the concert hall and hear some classical, unamplified music. Don’t make the mistake of not having a good understanding of what unamplified instruments sound like -as a reference even if you only listen to for example pop, rock or techno. #7. RELAX Pay close attention to how you react to different sounds in your room. Are pianos, flutes and soprano singers irritating to your ears? Do you find yourself switching to music that relies more on rhythm than tone? Can you keep fully relaxed even when these instruments are played at realistic levels? Monitor your eye movement and facial muscles! #8. DON’T COVER YOUR MISTAKES Make your bookshelf speaker / room combination sound absolutely beautiful first, without worrying about the bottom range if you have speakers that rely on subwoofers to play 80Hz and down. Don’t be tempted to soften flaws in the upper ranges with bass. #9. DON’T FIDDLE WITH SMALL ACOUSTIC TREATMENT If you decide to experiment with absorbing materials on your walls without professional help -make it as thick and with as large areas as possible -several stacked drapes and/or thick, contoured acoustic foam. Don’t make the mistake of dampening the top range much more than the midrange! #10. GO ONE STEP AT A TIME Listen carefully to each change in the room. Try to only make one adjustment at a time and see if it fixed the flaw you were hearing and if instead some other problem was highlighted -try to fix that too or go back to how things were and try something completely different.

don't use rice if your place is at all prone to pests. Why give mice a grain silo? Use Sand or pea-gravel.

I,m Asian and I LOVE cooked rice! But not for filling speaker stands hahahaha

Good idea and smarter to fly to a shop, or doing a try before buy, tthen paying big and not listening to them in your room and not being happy and having to haul them back.

Another thing. Use the watts for dynamics, peaks and quality, and not for playing excessively loud.

i love thiis video ... Great tips

Love the new look

Great video had my fair share of mistake now have a system I spent £8000 in 2012 and am enjoying to the max into2020. Been in home cinema since 1996.

My system sounded great in my old house. When I moved it sounded awful. No matter what I did it still sounded horrible. After wasting lots of money on room treatments etc. I moved into a different room. It was much smaller but it sounds great again.

I like to take out the crossovers on speakers I buy and swap them with better parts. Cheap and easy to do. The only speakers I didn't do that to was Magneplanners

I can't believe how many times I made the polarity mistake...and I'm the diy fix it type. To err is human! Most times I was rushing or had other things going on.

Great video. Gotta fill my stands. BTW. World Wide Stereo (Montgomeryville) is my local hi-fi store. Excellent store. Knowledgeable and helpful staff. Bought and even won a few pieces from them. Worth a visit if within someone's distance.

great vid!👍

love this video😀