Y’all hating on v6s when y’all don’t even own a bike Hahahaha

The Borla mufflers/tips on that last Camaro....sounded the best and looked even better, no contest!

That last one sounded sick. It's cool to hear the difference in how the transmissions shift in the newer ones. Way faster and you get a nice pop from,the shift

The last car sounded the best, the others had a ricer sound to them. I would do the last exhaust.

Borla sounded the best. And the reason for buying a V6 Camaro comes down to cost. The 6th generation Camaro by far with 335 horsepower and You Tubers posting 0 to 60 times at 4.9 seconds is pretty quick for car costing $30,000 vs $45,000 for an SS. Yes, the V8 sounds 👌 awesome but more to insure- premium fuel, 0 to 60 at 4.1 and i can afford the SS but i find the V6 makes more Financial sense.

Dear young people don’t feel bad for having a V6 just cause some old fart doesn’t like the sound I made that mistake in High school I bought a 2011 SS and got so many tickets that I now pay 437$ a month on insurance for my v6 Camaro 😂🤦🏾‍♂️

Hating on camaro v6 like they didn’t click on the video to hear what they sounded like 🤣

I like these compilation videos you’re doing. Keep it up

These are actually some nice sounding V6. Also like the added pipes on the white one. Looks 10 times better than the original pipes.

Something about an X-Pipe that sounds really great. The X-Pipe and Borla Ataks are a great combination. I have a 2015 Camaro RS with a cold air intake and factory converters with two Chevrolet Performance mufflers that have a nice deep exhaust tone (truly satisfied with those mufflers too) Would love to add an X-Pipe to deepen that exhaust tone even more. Awesome videos that you post, love the different setups !

I started out with a 2010 1LT then to a 2010 2SS RS and now I have a 2013 ZL1. No hate on the v6 Camaro from me. Forever grateful.

I have super 10 outlaws. I love them. The magnaflow and borlas are sweet too

I have bbk long tube headers on my 2010. It had some exhaust work done before I got it from the cats back. I added headers and single high flow cats. Soiled motor mounts, cold air intake and throttle body spacer. Runs great just put 5000 miles on the new Jasper rebuilt engine.

I think the Magnaflow Magnapacks sounded the best overall. The deepness and tone was of a V8 compared to all others. The exhaust didn’t have the high pitch the others still had. The Borla looked the best and is definitely second, the price is way higher than the Magnaflows though.

Thanks for the video my guys. I'm going with the Borla.

great video specially to give ppl an idea of what their car might sound like.

I think the exhaust depends on how noisy you wanted. It all sounded good but to hear from the inside going down the highway at acceleration makes a difference versus hearing it outside

That you very much for showing the options. I'm building a g8 v6 and needed to know my muffler options

V6 is perfect for me :) Ofc the V8 sounds a little bit more powerful but its enough...fuck the haters. I have a Chevy V6 and i am so happy with it Its my Comrade

Great set ups and sounds!

borlas for the win..gotta get em on mine!

omg i love the new camaro exhaust pops with every gear shift

I got borlas on my 2020 2LT. Shit is worth it sounds super good.pretty loud and has a little rumble

Great explanation, help me a lot !! Borla the best

These v6 go hard IV seen them beat v8ss and it's gas mileage is better I'll take the RS all day

I’m not a fan of the V6 sounds most of these cars make but I don’t mind the Magnapacks, not too obnoxious and an nice deep tone

My camaro has the flowmaster American thunder, and a magnaflow x-pipe. I think it sounds pretty nice

Those Magnapacks tho!! I think it’s the better sounding one

I'm as old school as they come and even I realize that today's small displacement engines make as much if not more power than the old school carbed small block V8's. Back in 74, my father had an Olds Cutlass with a 350V8 and a 4 barrel carb, it was factory rated at a measly 180 hp! The inline 6 in my Chevy Trailblazer is 100 cubic inches smaller and makes 100 more hp power than that old V8 did. Technology has come a long way when tiny 4 bangers with a turbo make close to 400hp stock. Back in the day you had to spend a lot of money and do lots of work to a V8 to get 400 reliable hp out of it. Now we have monster LS v8's that can make over 1000hp on a single turbo.

Can I install the magna flow magnapacks to my 2013 chevy camaro LS V6???

I have a 2013 rs, it looks like the atak line isn’t available for my car, anything that you guys recommend?

I like those magnapacks and the Borla.

What are the pipes and customs you did for the first one. I have a 2020, and who like to see the price and parts you put on there

Have the borla atak quad tips on my 2016 been thinking about resonator delete

That's clean af

Borla is the only way to go with a V6. Sounds so good & people question it if its a 6 or 8. I know i did at 1st.

can you mix the borla ataks with magna flow xpipe?

I liked the convertible and the Borla. Borla definitely looked the best. I have a 2016 Colorado with this engine. I did the Flowmastr Flow Fx cat back exhaust on my truck. Sounds very much like the white Camaro with the Flow Fx mufflers. Would be cool to true dual my truck. Too bad you are so far away.

After hearing them all, the first one for sure.

Was debating on getting my RS straight/X piped... I am no longer debating.

I just bought a 2012 Chevy Camaro 1LT convertable V6 I have the factory exhaust on it, If i'm right. What do you think about putting glass packs on it ??

I have a v6 rs and I can easily keep up with mustang's the only thing I did was put a chip and tune it everytime you shift it pops lol at 7000 rpms

Wow the last one was perfect

Last one is awesome!!!

I've came across paradox mufflers. They actually have a tuning fork contraption inside to reduce or eliminate drone. Only one video on KZfaq installed on a v6 camaro.

On my 18’ Camaro LT RS V6 I have a muffler delete, resonator delete with X pipe, secondary cat delete, quad tips and all pipes are 3 inch did it yesterday sounds amazing🔥

Magnaflows sounded better than all of them in the car start up but the borla got them in the take off.

7:35 takes the cake for me. Hope to do this on a v6 mustang one day. Number 1 9:43 was nice but way too loud for a daily.

The last one was the best..i was scared when the white one almost hit the caddy reversing!!

Glad I own a 2SS with a V8. Got the Flowmaster American Thunder on it and it sounds beastmode. Having said that though, all the people talking shit about the v6's owe them for our v8's. GM and Ford sell about 20 or more v6 models to every 1 v8 sold. Without people buying the v6, we wouldn't have our v8 models. We may not even get a 7th Gen Camaro as it is and the Mustang 4 cylinder EcoBoost is outselling the v8s by leap's and bounds. Argue all you want, but us V8 sports/muscle car crowds are just a "niche" group that the manufacturers are not catering specifically for and the v8 is just a minuscule fraction in the modern automotive world and is a dying engine outside of heavy duty pickups and diesels.

Not even close with anything else. BORLA smashed it!!

I was fortunate enough to have bought mine ( 2012 ) already with Borla exhaust on there.

I honestly think I might go with this set up

To get rid of rasp only one type works: 16” glass packs. Make sure the holes are facing the engine.

Anyone has an opinion on what exhaust I should get for my v6 lt has to sound loud asf like a demon

ii recently done the Borla Atak , Resonator delete. There is a little rattle now under the car.. Is that expected? Its not bad , but a little noticeable.

Where is the link for the Borla i have a 2012 rs camaro and i want it to sound exactly like that last one

Borla or the first one. I have a 17 RS as well.. definitely need one of the 2 set up

Can a LS 2015 v6 3.6 engine fit inside of a LS 2011 Chevy Camaro v6 3.6 engine. My engine in my 2011 blew out just wondering will the 2015 fit inside my car

I like the magna packs best.

The first one was the best !

magnaflow for the win!

Have you tried a true dual on V6? I mean, completely separate.

My uncle is finally getting his muffler switched out on his current V6 Camaro hopefully it sounds good

beautiful video, you should just let more time listen to the Camaro run.

The borla and the magaflows are pretty nice, it’s probably what I’ll put on mine

The borla ataks in the link provided only have 1 tip, is there one with two tips?

I have a 2014 can I still get borla ataks ???!

Do u think the borla atak would fit in my Camaro LT 2014 please someone help me

Borla sounds good too

How can I get my camaro to pop & bubble more. Is that is exhaust or tune

Those welds look mint

Second one mrt version 2 sounds the best on that car with y pipes

The Borla sounds the best.

where did the last one get his gloss black diffuser?

Mrt v1 sounds amazing to

Borla ataks all day I might put those on

The #1 pick almost sounds like a V8. So close good pick for the top spot

Hey I’m tryna get the last one borla ataks the dual exhaust where can I find em both!?!?

How do I find this garage to install mine??

I always thought the dodge 2.7/3.5 V6’s sounded pretty decent with an exhaust too, better then their 3.6 pentastar counterpart.

Any help with finding a decent x pipe ? Not so expensive

Customer didn't sound happy at 4:18...she said, why don't it really sound like anything

I steel don't find any exhaust set up that makes me think is gonna hear better than strate pipe on my v6 camaro , trying to finde one to get ride of drone noise, but looking those videos I think best I can do is helmholtz resonator on it .

You need mine on here!

Love my V-6 but don’t like any of the sounds showcased here, i’ll stick with the stock set up for now, has a nice sound In the cabin when accelerating.

2 and 1 sound the best

1:58 I thought he said “nice dents”

When did people start calling exhausts with cats still on them straight piped?

Right there bro

The two last ones were best sounding.

I hope someone can make a retro fit kits for the 6th generation Camaro someday

I want to get something done on mine but I’m not sure what I want

What do I have to do for the borla exhaust not really trying to copy anybody(well ok I might be lol) but I need that exact set up and the link to Amazon said it didn't fit my 2017

Me owning a v6 and v8 camaro honestly just go full straight pipe on the v6

@Exhaust Addicts where can you buy the “True Flow X Pipe” from the first car?

How much does it cost to do something like this for a 2003 v6 Monte Carlo?

I like the 5th generation Camaro more because they look nicer and plenty of retro fit kits for them

I like the white one. A lot cleaner

What part of TN are you guys in? If it's not too far I may swing by soon to get some work done like this