Top 5 Dirt Bike Accessories Under $100

Рет қаралды 465,477

Күн бұрын

Top 5 Dirt Bike Accessories Under $100:
www.rockymountainatvmc.com/Sa...
We all know that riding dirt bikes is not a cheap hobby, no matter what skill level you're at or style of riding you do. So while at the offices one day, the conversation started of what parts or accessories we would buy for our bike if we only had $100 to spend. In this video, Chase goes over our top 5 accessories to upgrade your dirt bike that each come in right around the $100 mark.
Visit www.rockymountainatvmc.com for all your parts, apparel, and accessories!
Click Here To Subscribe To Our Channel!
/ @rmatvmc
Follow Us On Social Media!
FACEBOOK: rmatvmc?utm_...
INSTAGRAM: rmatvmc?ut...
TWITTER: RMatvmc?...

Пікірлер: 293

@andrewsmith2948 4 жыл бұрын

1. skid plate 2. radiator gaurds 3. hand gaurds 4.shark fin 5. rear tubliss

@rmatvmc 4 жыл бұрын

not a bad list right there!

@importsandatvs3072 4 жыл бұрын

And forward bending levers

@BoostedFB6 4 жыл бұрын

Imports and Atvs just leave your levers a little bit loose on the bar and bang them into place if you crash

@andrewsmith2948 4 жыл бұрын

@@importsandatvs3072 Full wrap handgaurds will protect perches and levers

@andrewsmith2948 4 жыл бұрын

@@tonycstech Did you not watch the video???? Cost of each item is under $100 ahahhaha

@LukasMxMTb 4 жыл бұрын

Gas, water and food so I can spend some hours riding

@rmatvmc 4 жыл бұрын

Well the food one is easy, just go to your parents house and check the pantry for some food haha.

@kleinbiker1 4 жыл бұрын

@@rmatvmc lame!

@ergoaia.nolifeprod.2830 4 жыл бұрын

Rocky Mountain ATV MC this is the reality

@carsonjohnson1845 3 жыл бұрын

😑🤫

@Drain09 4 жыл бұрын

1. hr meter 2. Handle bars 3. Grips 4. Air filters 5. Levers Then start with clutch plates, brakes, pegs, extra things that wear out.

@mikeking7388 4 жыл бұрын

I could move my levers to the centre of the handlebars and I know I’d still break one off lol

@streetrider11 4 жыл бұрын

You ever consider wrap around handguards? I drop my bike all the time and haven't had a problem since I got them 👍

@andymorvant628 4 жыл бұрын

Mike King lmao. I always did move mine in. Just like the guy said it’s more leverage to pull them in.

@rmatvmc 4 жыл бұрын

haha!

@jamessharp9790 4 жыл бұрын

I have vintage European bikes with Magura levers , I’d always known them to be impossible to bend , but my son has broken four of them now . I’m gonna stockpile them now. But at least I put Teflon tape under bracket so it spins instead of breaking lever.

@frogyandfriends3501 4 жыл бұрын

I built a locker in my garage for my gear and I used the first lever I ever broke as a latch🤣🤣

@rmatvmc 4 жыл бұрын

What do you think of this list? What accessory would you pick up if you had $100 to spend?

@APEX-xm6hm 4 жыл бұрын

the choices overwhelm me i need the bottom end for my 2010 kx 85

@Calisurfside 4 жыл бұрын

Grip seat cover

@benfairhall5331 4 жыл бұрын

You can sort of go two ways with it? Do you wanna spend a hundred dollars on something bling that adds no performance or are you gonna spend it on something purposeful and worth while? Guess it depends on how you spend your hard earned!

@ridder8 4 жыл бұрын

Cigarette lighter

@tiberobeyns8 4 жыл бұрын

Weed

@DmenDuroRider 4 жыл бұрын

Top 5 trail bike mods! Pro tip: Get an pneumatic file. You can sharpen the stock pegs 3-4 times before you have to buy new ones.

@rmatvmc 4 жыл бұрын

good advice!

@DmenDuroRider 4 жыл бұрын

@@tonycstech never heard of an air file? You can get one at harbor freight.

@jonnoMoto 3 жыл бұрын

@@DmenDuroRider Or just use a hand-file.

@dbikekid2169 4 жыл бұрын

I would spend my $100 on Monster Energy and Metal Mulisha sticker packs

@rvlee8577 4 жыл бұрын

Great list and tip. Thanks for sharing and Happy Trails

@haringusbaw6132 4 жыл бұрын

as always, clear explanation and packed of information..

@TankRC. 4 жыл бұрын

1. Light bar 2. Hand guards 3. Skid plate 4. Air filter 5. Foot pegs Love the vids can you do a ATV accessories list

@jimbob90p 4 жыл бұрын

Great video I am so glad I found your guys channel loved the 5miles of hell videos with cheap bikes.

@rickeddins302 4 жыл бұрын

Definitely a seat cover you can find good grippy ones with ribs well under 100 bucks and just helps riding technique much better

@aeror115 4 жыл бұрын

again cool video with great tips guys! Cheers

@robertmuir734 4 жыл бұрын

Good list overall. Second to moving levers in or in addition you can put Teflon tape under the mount or leave them a hair loose. That way when they hit the perch can spin some as well.

@brennangarvey8580 4 жыл бұрын

I have the renthal twin wall bars on my Crf450r and they have never let me down

@kkooloo5781 4 жыл бұрын

Respect the tips ! From England 🇬🇧

@tytesarski272 4 жыл бұрын

Amazing list

@thehillbillyhoarder4996 Жыл бұрын

Nice video. Thank you for sharing.

@MXUnion 4 жыл бұрын

Ima need me one of these accs! ❤️🔥

@SpectrumSpectacle 4 жыл бұрын

I would either do grips or footpegs (unless a tire is bad)

@HybridEdits 4 жыл бұрын

Woods Rider here. 1. Skidplate 2. Cycra Pro Bends & Tusk Mounts 3. (On new KTMs) GRIP SEAT COVER 4. Bars 5. Used set of radiator brace/guards

@HybridEdits 4 жыл бұрын

Allie Bridge 1 1/8th bar mounts

@dcxplant 3 жыл бұрын

Good advise on the tires. For smaller hands, get adjustable levers.

@connersnow298 2 жыл бұрын

Awesome vid and edits and filming and bike and products

@jakegleeson1554 4 жыл бұрын

Bark busters are number 1

@chrispotter2948 4 жыл бұрын

Skid plate being a close 2nd. I made one for my old wr200 with sheet aluminum from a scrap yard and u-bolts. Hammer, grinder, drill, file and you're good to go for cheap.

@crf250honda7 4 жыл бұрын

He should put some hand guard first! Then radiators protection , skid plate , better radiator tap, breaks disk protection

@jamessharp9790 4 жыл бұрын

crf250 Honda all subjective . I almost can’t ride with hand guards myself

@broughttoideas 4 жыл бұрын

Amazing video for the average rider the majority we dont have loads of cash to throw at are bikes

@mrblack3480 4 жыл бұрын

I bought expensive levers and wrap around hand guards to protect them even tho they can bend backwards

@austinleach3229 4 жыл бұрын

Pretty good. Graphics, hydration pack, goggles, chain. Lots of 100 dollar purchases

@frogyandfriends3501 4 жыл бұрын

That back fender had me trippin😂anyone else??

@nicki3305 3 жыл бұрын

Why?

@devinpendergast2705 4 жыл бұрын

One of the first things I buy are unbreakable levers

@mocha45823 4 жыл бұрын

First thing I bought when i got my son a new bike was an hour meter.

@morganhay859 4 жыл бұрын

Leo Marquez wish I had one on my bike I have no idea how many hours are on my bike

@SirBrondon 11 ай бұрын

Best part is when he says he's a short rider at 5'7" and here I am 5'2" trying to put the kick stand back like a child on a bar stool -cries-, good video though!

@K-Town.CooKoos 4 жыл бұрын

Tip for foot pegs: file them down when they wear out to sharpen them

@cutznfadez4683 4 жыл бұрын

"lock on grips = no wire" Shows lock on grips with wire 😂🤣

@iphone3gsdivine 3 жыл бұрын

No it doesn’t

@matiasg97 4 жыл бұрын

Can you do one for Husqvarna Fe250, please.

@96joe 4 жыл бұрын

🤔 my top five would be hour meter,radiator braces,skid plate,grips and bars. For a new bike. For 50$ Air filter,grips,hour meter,bolt axle blocks and front steel braided brake line. Great video 🤘👍

@tompleed2117 4 жыл бұрын

Why a hour meter?

@andrejskamla9736 4 жыл бұрын

Skid plate Radiator braces Full wrap around handlebars. Mousses or tubliss Rear rotor guard

@kaidenmarthaler6017 3 жыл бұрын

My number 1 is a skid plate and #2 is extended tip rear brake lever

@saulsxs2861 4 жыл бұрын

I just got your jack and I love it

@rmatvmc 4 жыл бұрын

That's awesome! Be sure to leave a review on the site.

@ryanholland1289 4 жыл бұрын

Somewhere in the mix. Full wrap hand guards and a spark arrest to end cap if your bike isn’t already spark arrested maybe even an oversized tank

@Seve941 4 жыл бұрын

Holeshot device in youre Racing ✌🏻

@nickpeccarelli7593 4 жыл бұрын

1) Works Connection Radiator Braces 2) Magnetic Oil Drain Bolt 3) Works Connection Holeshot Device 4) Pro Taper Wireless Hour Meter 5) Acerbis Footpeg Covers * (Bonus) Skid Plate (if the bike doesn't come with one)

@eastcentralfloridafishingc4682 4 жыл бұрын

my 2002 yz426f is an Ebay built bike for like $300 new water pump, fork seals, frame guards, levers, brush guards ,new chain and sprockets, and graphics she looks and rides like a caddy

@dv8214 4 жыл бұрын

$50 or less hour meter, grip tape, bar risers, sprockets to change the gear ratio, seat cover, and motion pro micro fork bleeders

@kaaarchajdm 4 жыл бұрын

Stickers are important they give more HP

@rmatvmc 4 жыл бұрын

Agreed.

@fullstroketv8166 4 жыл бұрын

Well first I would do a skid plate because I ride more trails then I would say foot pegs for the next one I would say tires 4th and 5th would be chain and seat

@mrniceguy0895 4 жыл бұрын

I have the exact same seat cover 😂

@adamnorwood29 4 жыл бұрын

A FMF exhaust if it didn’t already have one on it if I brought a bike used

@YZdude 4 жыл бұрын

The Tusk radiator cap with a temp gauge was my first buy. Such a good idea.

@waylonwarneke4806 3 жыл бұрын

How does it work

@YZdude 3 жыл бұрын

@@waylonwarneke4806 just replaces your old cap and has a gauge on it so you know when your engine is warm or too hot.

@waylonwarneke4806 3 жыл бұрын

@@YZdude sorry I’m kinda dumb but do u mean your gas cap ?

@YZdude 3 жыл бұрын

@@waylonwarneke4806 radiator.

@waylonwarneke4806 3 жыл бұрын

@@YZdude ok thanks

@row450 4 жыл бұрын

U/hd tube f&r, skid plate, radiator braces, chain, bars

@milestsinnijinnie8344 3 жыл бұрын

Minds a crf150f and I’m trying to costom it like urs

@wm3105 4 жыл бұрын

Just bent my lever on mine should of watched this sooner

@premix3663 4 жыл бұрын

Problem with bars is sometimes it takes weeks or months to know you don't like the bend

@Matt-dz6qn 4 жыл бұрын

Premix Utah you should be able to feel pretty quickly if you’re comfortable or not... I’m talking 2-3 motos in 1 day and you should be pretty much used to it. Especially it if it’s a bend that suits the way you ride. Forcing yourself to feel comfortable on something you don’t like is the best way to either crash or add 5-10 seconds onto your lap time

@jamessharp9790 4 жыл бұрын

Or you might like different bends on different bikes too. Tougher on vintage bikes too, I finally tried the Renthal vintage bend on my 77’ Husqvarna and I like it but on the Japanese bikes I like the early Cr Elsinore bend more 🤷🏻‍♂️

@iwannebergjh7876 3 жыл бұрын

what's the tire pressure for a motocross track like glen helen

@Obso1337Lifestyle 4 жыл бұрын

Used bike, fluids, filter, tune-up. New bike, grips and an breakaway clutch lever with ez turn

@trentonmeyer3445 4 жыл бұрын

Buttery and Medium in the background 🤣

@OfficialMaxemaz 4 жыл бұрын

Where?

@Matt-dz6qn 4 жыл бұрын

1. Bars & grips 2. One piece bar mounts 3. Tyre/tyres 4. Skid plate 5. Gripper seat

@jimmyneutron6127 Жыл бұрын

Grip donuts!!! Don't get blisters.

@odownton1322 2 жыл бұрын

Can you do a video aimed towards the fmx guys on dirt bikes? :)

@joshhowells1097 4 жыл бұрын

Would the one size clamp fit my 2012 ktm 125 sx ? Also where can I buy it from if it will fit ?

@rmatvmc 4 жыл бұрын

www.rockymountainatvmc.com/parts/ride-engineering-one-piece-oversized-handlebar-mount-stock-triple-clamp-p here is the link to the page!

@billythekid2281 4 жыл бұрын

Im only new to dirt bikes, but im getting the impression radiator guards are a good investment. Every bike i see seems to have smashed radiators

@Matt43 4 жыл бұрын

Protection, protection, protection so I can ride harder and still make it back to the truck after a spill or clash with all the rocks of the Rockies!

@aarong4510 2 жыл бұрын

1. Skid plate 2. Hand guards 3.foot pegs (extra wide) 4. Rotor guards 5.2 finger levers

@Andrew260RS 4 жыл бұрын

I run a stock kx450 and really unsure what bar I should get. There is so many different bends. I really don’t know where to start!

@thealvaco 4 жыл бұрын

Try others bikes to feel the difference

@josephgreening1776 4 жыл бұрын

The first thing anyone should buy for a new or used bike is a factory/oem service manual.

@tiab6333 4 жыл бұрын

1 handle bars 2skid plate 3 seat cover 4 grips 5 arc lever

@steveokel3257 4 жыл бұрын

Protect your investment first, 1.skid plate. 2. hand guards. 3.rear disc guard 4. swing arm tab protector (swing arms are $$) 5. pipe guard if you believe in them, many don't. I wouldn't start with your top 4 because they are all comfort items. Nice to do eventually, but if you break the things you didn't at least try and protect, you're not going to care which bars, mount,grips or pegs you have. Like all list, it is subjective.

@joshhowells1097 4 жыл бұрын

What size are the handlebars you have with the odium podium flight ??

@rmatvmc 4 жыл бұрын

The bar I had on for this video was the Mcgrath bend. Pretty low and straight. Right now I'm using the new RC4 bar from ODI. I like it a little more. - Chase

@trickynic3866 4 жыл бұрын

Bars,grips,skidplate,seat cover and sprocket

@rmatvmc 4 жыл бұрын

Seat cover could definitely be on my list. Some of those things are like slip n' slides. Thanks for watching! - Chase

@bubaa1218 4 жыл бұрын

What would you recommend for handle bars for a 6-5 guy?

@Samson_Adams 4 жыл бұрын

Joy Trivia pro taper xr50 bars

@jamessharp9790 4 жыл бұрын

Renthal Jimmy Button bend and use 1” bar risers you can find for pit bikes

@martycrawford1081 4 жыл бұрын

I would get pegs and tires and that bar mount how much is it

@rmatvmc 4 жыл бұрын

The mounts range from $85 to around $100 depending on what bike and size bars you have. You can check them out here: Standard bars- www.rockymountainatvmc.com/parts/ride-engineering-one-piece-7-8%22-handlebar-mount-p Oversized bars- www.rockymountainatvmc.com/parts/ride-engineering-one-piece-oversized-handlebar-mount-p

@robertwoods2505 3 жыл бұрын

For us carb dudes, JD Jetting Kit and R&D Flex Jet fuel screw.

@bmwm34 3 жыл бұрын

yessir

@iiTzPickle 4 жыл бұрын

First thing I bought for my bike was radiator braces lol

@frankcrawford4455 4 жыл бұрын

2tru it's going down inn brace the fall can't make it to far with out them so Ya one of my top choices as well

@claireelliot6846 4 жыл бұрын

I should've now my left radiator looks like ) |

@brakel3ss 4 жыл бұрын

That track looks like a blast, anyone know where it is?

@charlieheinrich9927 4 жыл бұрын

priv so they could film at anytime i would guess

@oldwisdom181 4 жыл бұрын

That’s the crazy nice track by coalville wanship

@RideWithTheWolf 3 жыл бұрын

Can you suggest wrist guards? I've heard of people adjusting their levers in so they are closer to the grips? Can you do that with hydraulic levers?

@rmatvmc 3 жыл бұрын

Wrist guard? I'm assuming you're talking about a wrist brace? If that's the case, I have the Mobius X8 wrist brace and I really like it - Chase

@hotchoccy99 4 жыл бұрын

Hand guards?

@ardennielsen3761 4 жыл бұрын

A barrel of 110?

@kylercarlstrom1644 4 жыл бұрын

Gripper seat cover

@scottbolen5246 4 жыл бұрын

go aluminum skid plate. The acerbis plastic does not hold up on rocky trail. Spent good $ on it and it let me down after a few rides. Dont get me wrong, I shop 100% of my parts from RMATV just saying its not worth the $ for the rocky stuff.

@octaneaddiction1405 4 жыл бұрын

I would get a nice air filter because it seems like every used bike I get has a air filter that has probably been neglected since the bike was made

@rmatvmc 4 жыл бұрын

I didn't even think about that! But that is really good advice. Thanks for watching! - Chase

@gtavtheavengergunnerlegend3340 4 жыл бұрын

That is a excellent choice!

@Moose-yl2wk 4 жыл бұрын

1. Exhaust 2. Grips 3. Levers 4. Graphics kit 5. Gas cap

@DanNZ69 4 жыл бұрын

1 & 2. Tyres 3. O ring chain 4. Levers & grips 5. $100 of fuel

@mavericgames1409 Жыл бұрын

I love my geomax mx 33

@lysergic_visions3203 3 жыл бұрын

#1 Oil filter/oil change.. #2 air filter/air box cleaning spray.. #3 radiator flush kit & coolant change.. #4 new oil lines/fuel lines/& coolant lines. #5 spark plug/new battery... That is if your buying a used bike because it would go so much further instead of some new bars, grips, or a skid plate tbh...

@dr.hugog.hackenbush9443 4 жыл бұрын

Some of my choices are a little more than $100, but not much more. #1: Skid plate with water pump protection. #2: Controls. (CR tall bend bars, clutch pull reducer, levers & spare perches, Renthall medium compound full waffle grips, hand protection.) #3: Tires & super heavy natural rubber tubes. #4: O or X ring chain & tool steel sprockets (if available). #5: Oversized front brake & pads for both ends. Rear disc protector.

@bronzenwoolsey7280 4 жыл бұрын

Where is this track you guys are at?

@rmatvmc 4 жыл бұрын

This is OCA MX club in Ogden, Utah.

@jonesesente7646 4 жыл бұрын

1. Rad Braces, 2. Skid plate, 3. Handlebar, 4.hour meter, 5. Gripper seat.

@rmatvmc 4 жыл бұрын

I like it! Especially that gripper seat.

@jonesesente7646 4 жыл бұрын

@@rmatvmc yessir! i think that line up is solid. =)

@jameslyons1661 Жыл бұрын

🏁👍

@rjtanner8442 4 жыл бұрын

Chase, where did you get your bike graphics?

@livefastdiequick 4 жыл бұрын

I think this place called Rocky mountain

@rmatvmc 4 жыл бұрын

haha!

@rmatvmc 4 жыл бұрын

Attack graphics is our own graphics company here at Rocky Mountain! The kit i have on my bike is called the "alloy" kit. If you want mat instead of gloss, just call in a and request it.

@livefastdiequick 4 жыл бұрын

@@rmatvmc Chase can I get a discount on number plate graphics! It's the final touch to my bike!

@northernrips9959 3 жыл бұрын

I would say a new carb would be nice (if you bought the bike used)

@emanresu1133 4 жыл бұрын

Top 5 impulse buys

@Sonoknow 3 жыл бұрын

Grips and braided brake lines

@danielc5205 4 жыл бұрын

I'd buy a engine hour meter. My new four stroke has no odometer or a hour meter, so the maintenance intervals is just a guessing game.

@rmatvmc 4 жыл бұрын

I almost had that one in my list for this video - Chase

@Andrew260RS 4 жыл бұрын

Plug a laptop in and it will tell you how old your engine is.

@pineapplepissant 4 жыл бұрын

Tusk 1.8 radiator cap with temp gauge 25$

@rmatvmc 4 жыл бұрын

That's a good one!

@andymorvant628 4 жыл бұрын

Is a bent rim causeing me to have flats every three days. Bought a used bike about two weeks ago with a bent rim. Rim has two broken spokes and been gets flats like crazy. Getting a new rim ordered pretty soon.

@joshhernandez8218 4 жыл бұрын

There could be something in the tire puncturing the tube or maybe your just pinching the tube

@rmatvmc 4 жыл бұрын

I would take the tire completely off the wheel and make sure you don't have something floating around the inside that could be puncturing your tube. Plus it's just not safe to ride with two broken spokes.

@andymorvant628 4 жыл бұрын

Rocky Mountain ATV MC. I had my cousin check it out bc he’s evening riding for a while now and since he looked at it I been good. Besides that three more days till I get my new rim ordered 😁. Is there some were I can txt y’all about my bike bc there’s a number of things I needa get fixed and dk what it really is

@andymorvant628 4 жыл бұрын

JOSH HERNANDEZ yea. I got a rim in and haven’t had a flat in a week now hopefully no more for a while

@mxracingunlimitedltd7784 4 жыл бұрын

It was the broken spokes hitting the tube and puncturing it. He probably just fully removed the broken spokes and taped wholes. Then no flats at least. Still needed the wheel though..