+1 for the Jason Snyder cameo :D

Shock shaft pliers are a life saver when working on shocks or assembling turnbuckles.

I'd love to see a video on your post process for GoPro footage! I've just recently been tossing around the idea of making some videos myself, and it would be nice to see someone else's method. I love the lighting in your videos too... so, ya know, if you ever needed more video ideas.

Some GoPro settings would be pretty cool man

Yes on the GoPro video. Add to the list of top tools...INFRARED THERMOMETER. Gotta read those motor/engine temps!!!

Would definitely like to see video editing process and methods!

I see a cigar humidor in the back that completes an rc work area!

The more Ryan Harris videos I watch, the more I like! Great video and great links. I appreciate the helpful guidance whenever it comes to expenses.

The dewalt screwdriver is really the best. The gyro controls are amazing. Super fine control over speed. Twist in, twist out. It's great. If you're not tied in by shared batteries you should check it out. (Make sure you get the one with the clutch.)

That M4 style electric screwdriver Milwaukee has had for-ever!!!! Had one at my first dealership job in 94. Old nicad or nimh I can’t remember but yeah. I opted for the M12 drill driver 2401-20 because I have a pile of m12 batteries.

Yes more gopro stuff u a very good job with yours.

Ok best tool for rc racing... real easy... and it wasn’t mentioned BUT it’s here... bar none the best tool for rc racing is the Ryan Harris KZfaq channel! 😁😉 Love ya man! Learning so much. Love how you focus on Stock 17.5 and 13.5 too. Never stop what you’re doing bro!

Great vid love this stuff. Yes a GoPro setup vid would be awesome

Please do a video on the GoPro settings

Dremel Rotory is also essential to cut and modify part's! And for cleaning!

Just picked up a Biesner desk lamp for my Yokomo YZ2 build, great idea but Harris making me spend money here!

Best 2 suggestions are the electric screwdriver and the pit lamp. There is NEVER enough light in your pit. If you go the screwdriver route you need to get some bits. HUDY makes some good ones.

Thanks for all the information sir...looking forward to seeing more of you voids

You can’t forget to mention the sanding stick along with the tire drill

Let's see that GoPro video!!!

Nice setup!!!

Definitely my MIP drivers. Basically the Snap On Tools of rc

awesome video thanks!

I love the cigar humidor in the background!

From a guy who built a 1/8th Nitro buggy kit by hand; Get an electric screwdriver. No excuses! It will save you a LOT of pain (my forearms hurt for days to the point I could barely work), time and stripped screw heads/threads. Make sure to do the last turn by hand though. I think another thing that is a great purchase is an entry-level 3d printer. Whether it be shock- or diff-assembly stands, hooks to hang tools, organisers for screws, you name it, they can all be produced for mere cents in terms of material cost.

Love to here more about the GoPro use!

Another great video, sir! +1 on the GoPro setup tips!

Electric screw drivers are great!

i love the humidor in the background!! a nice relaxing cigar is a wonderful treat now and then... love the videos! keep the great content coming!

That set bro🔥🔥🔥

I love you’r videos! They are super awsome! Telling us all that info! Thanks!

Love Milwaukee tools!

Love to hear your go pro knowledge for Rc and Moto!

I use Makita tools for my job. I started to get back in to RC after a 20 year break. I decided to use only Milwaukee tools for my RC hobby. I use the 4 in 1 12v drill driver for my RC needs. I also will use a Milwaukee Packout for each vehicle that I have and each Packout will have itsʻ own shallow organizer for vehicle specific parts.

No here to start a fight, I use Makita, you can use whatever brand you like, but everything stated by Ryan in this video, I agree with.

I’ve been using Milwaukee m12 drill and impact for going on ten years. Its built multiple baja 5bs and a couple fences. Love mine I found 18v to powerful for rc.

Love Milwaukee gear! And definitely do a GoPro video!! 👍👍😃

For us older folks with not so good vision, I use a magnifier similar to what jewelers use when i need to solder an ESC and motor, it helps me ensure the solder joints are good.

Yes, do a video on the gopro setup and what you do in post, that'd be great!

TGH rod end installer is a must!!! A GoPro video would be great!!

Yes, do a vid on the go pro set up please

A GoPro video would be awesome. Cool new RC room... A room tour would be awesome too. Keep up the good work your awesome!!!

i like the humidor!!!

Hi Ryan, Great sharing and I suggested gentle brushes and a chargeable blower which is easy to find on the site nowadays. It helps dust off certain areas ie gearing, ball joints..etc , which cannot afford the powerful blow gun on the track. Cheers

It was pretty Cool I got to meet Jason Snyder this weekend at the LSR Ice Breaker race is Sac this last weekend..

Mr Harris - after seeing the GoPro demo I used my gopro10 and it's amazing, granted a bit awkward as it's bigger than the 8 but it's so nice seeing where I need to improve and can't get over the POV. Mine has WIFI though so it's great setting record and stop via the phone app :) Fav tool would probably be my AKA wheel wrench that has multi size for the wheel nuts/shock tower nuts. Honourable mentions, Wella soldering iron from my father in law that's probably from the early 80s and Hudy 2mm driver!

I'm a Milwaukee guy as well - but the one area I go yellow is the gyroscopic screwdriver. That feature is game changing, and it's also cheaper (which means it probably won't last as long - but oh well)

Yes to the go pro settings and post tips.

Top 6 tool rc racing ✔ i like your video 👍🔧

Awesome videos and knowledge! Would love a video on go pro settings, thanks Ryan

I dig the AJ Catanzaro shirt!🤘🏼

great video

Good video. For people that actually use cordless tools everyday, Milwaukee is by far the most popular choice.

interested in the gopro spects

Someone moved to Sony!!! Looks sharp!!!

A video on the gopro techniques and settings would be awesome!

Dude. MIP drivers FTW, and +1,000,000 on Milwaukee gear!

Yes for the gopro video

Yep definitely interested in what you have to share about the GoPro

Nice Mark Martin poster there Ryan, I see you

Dewalt gyroscopic screwdriver with clutch.this tool is super cool

Hey Ryan, you want to take that soldering iron to an even higher level, get the TS-C4 tip. It has a higher thermal mass and will speed up soldering even more.

...and, love your technical aspect to your vids. It satisfies my OCD approach to r/c/:) How about, a vid going through your Sanwa radios, and the settings you use, with a technical explanation, including practical examples of parameter used, and the what, why, when, and how you use things like D/R, EXP, Ch mixing, ALB, Racing modes, etc. And the Low-Fi soundtracks are killer.

Yes! For the Gopro vid.

It would be cool to see a video on the GoPro video settings, I really like that idea

I'd like go see the video about the go pro

while i like those small Milwaukee or Makita screwdriver/drills, I found the Dremel offering a bit better to pack and haul around. No need to fuss with a removable battery and charging base. Great video Ryan. Might put together a video of my own. Also, also...new filming setup is dare i say...DIALED!!!!

I've got the hudy set up board, The ottlite twin power pit light, The Philips adjustable handle screwdriver, same as your milwake one and have around 25 bits I keep in a glasses case, i have hollow tube shape magnets slotted onto my tips to stop losing screws, I use the postal technic gas powered soldering iron stored in another glasses case I use the gopro 8 also as well as my session, and hero black 3 plus, get multiple angles My battery operated dremel is also a must to take racing Oh and my mac pistol grip 6in pliers

I use the metabo HPT (Hitashi) comes with 2 batteries and a charger works awesome and I’m a person who is a sucker for Milwaukee on my real cars..

A diff scale. It makes the outcome of your diff rebuilds that much more consistent.

Yes, please do a video on your GoPro editing. I recently dust off my old Hero+ GoPro. One reason I put it on the backburner was because I had zooming issues. Everything was so far away when it came to track footage. Thanks!

I bring my cars around in the packouts rather than those bags, Milwaukees super handy like that and I just building my stack, puttin gall my airbrush stuff in one of the half size kits too. Packout all the way!

M4 system. I use them at my job. We have a ton of them, and lots of different tools use them. Great for big jobs in small spaces. I work in missile defense for a US gov contractor.

please post that video on your post production process, I know there are a ton of people who would love to use the go pro as a tuning tool!

OLFA Cutting board is excellent for cut stuff

Subscribed.

I think it would be cool to see a quick edit on what you bring to the track

Another great video. I agree with the screwdriver. I have the Metabo and hands down one of the best things I have gotten. If you could make a video on the go pro setting that would be great.. Definitely something I personally would like to do. Do you have a suggestion for something other than a Gopro? Keep up the great work and amazing videos.

100% agree 💪🏾💯

Yeah would like to see the gopro setup for racing.

Set up board should have ridges to catch dropped parts and also soft to allow parts to not bounce. Or don't even bother using one.

Please Please Please do a video on your gopro settings, I have the new gopro and need some help getting right. thnks

Go pro video!

New rc room? I ask because it looks dope

Just caught a lightning deal on the led light you shared. Paid $20 👌🏽

Hey Ryan, is there a chance you could say what allen tips you use for the screwdriver?

Really interested in learning about the settings you use on the GoPro and how u edit the video thanks

are zip ties considered a tool? HAHAH anyway, great video man! now I really want that soldering iron

You should try the bosch go electric screwdriver, in my opinion its probably the best screwdriver. Its cheap, surprisingly fast and it won't strip out threads.

great setup ryan! Please do a Gopro Video. Greets from Germany!

Please do a video on GoPro settings!!! That would help me out a lot 😅

I'd like to see a GoPro settings/post video!

sweet shirt. watch the guy also!

Go pro videos would be nice... and more drive techniques videos!

I like the new style of videos. What if you put some LED strip lights under each shelf to highlight all your rides!?

would love to learn about your gopro settings

Yep that’s cool How you recorded and why the settings also how to setup your transmitter

That drill is a little over the top. A much smaller one like a 12V from Bosch, Milwaukee, etc would be more than enough.

One major thing that I would like to add to the list (specifically for nitro racing) is a pit caddy. The bags that people put their starter box and tools in is a pain. It way nicer to have a caddy that holds the starter box with car on it, fuel bottle, glow igniter, and tools all in one. I used the RC Trackstar one. I have linked it below: hobbyking.com/en_us/trackstar-universal-pit-buddy-for-1-10-or-1-8-nitro-chassis.html

Dat humidor tho. 👀