@4:17 - - What a happy looking dog. :)

Twenty-four minutes of your life you will NEVER get back.

Great to see this enthusiastic and skilled young carpenter.

Con un vídeo así, se le enciende el foco a cualquier persona. Saludos desde República Dominicana

There were some very entertaining tricks in there! Thanks for posting.

De nombreuses bonnes idées: Bravo!!

Reminds me of the "wordless workshop" ideas I used to see in the popmech mags :-) well done presentation of great ideas

MUITO BOM. PARABÉNS!! VANDER DE MONTES CLAROS, MG, BRASIL

Some fascinating ideas here. Also, a few fairly dangerous ideas here. Overall, I'd say this will be a saved to be watched again video.

Wow,.. about all of these are excellent. REALLY like the saw turned into a table saw. !! But thanks for all of them! P.S. subscribed ! What was the one with the tape and the spacer between the tiles? Was that to show how to put a spacer between the wood planks on the wall above the work bench ? If so, why wouldn’t you just make them touch? Thanks !!

There are realy some good useful idears for me.Thank you.

4:18 The best hack would be to free the dog from its chain!

Brilliant! Thanks. Lots of work went into this. I appreciate it. Good stuff. Good vid. Nk

Excellent tips. Like the ones about cable ties in bags and small hole to pull cable ties through. Also helps to hang bags up.

Excellente idée au top 👍

오마나 꿈잘꾸었나봐요 9번만에 도전 성공했네요 감사합니다😋

I don't understand how the blade at 22:07 is setup to strip the wire. Is the wire threaded under the blade?

Ok number one Use plastic or aluminum or copper in the vise . Even a plastic bottle will do a better job 2 cut the tie wrap right at the connection. That edge when cut with pliers is very sharp 3 gluing those squares of wood. Use tape then clamps. Now about hanging tools . Use long wooden pegs. So when it rains the tool can dry. Plus you can stack more then one tool per peg. Put in a over head plug. So you don't have a cord on the floor or across the bench. That trick for rods at the end was clever. I added a steel tube to help keeping it lined up. Good luck with your projects

I really liked how you cut a nut in two to chase the threads in the bolt you cut off. I will use that one for sure~!! Thanks.

Thank you!

Richtig gut diese Tipps

I struggle to work in my small shed due to all the clutter I have in it! You have guided me to be sorting all that out this coming weekend! Thank you ever so much Sir!

Great Job!! Really impressed to see the effort put in to doing these all yourself. Most of these type of videos are compilations put together by an editor! Fantastic job buddy, a lot of determination!

Quelques bons trucs ! Bravo

I just love it when the tech is a "mute" and doesn't bother to tell you what he is about to do or has done or what materials he is using or anything.

It would be really helpful if you added some text or commentary especially when using certain types of adhesive or certain size of tool or the name of different tools or glues or wood that you're using etc etc

ME GUSTÓ MUCHO. GRACIAS MAESTRO.

genius ideas 👍 thanks for sharing ❤️ big like 👍 👍

Very Very good 👏

Terrific!!!!!

Thanks for more idea, this isfiration working in lifetime

I saw a guy put a Skil Saw through a piece of plywood and cut wood and make cabinet frames. All he had to do was buy the drawer fronts and doors. This was in a high-priced custom home.

great ideas! Here is another, they have this thing called a dog run. Takes place of the chain

Maharashtra, India 👍 informative video 🙏

Nashik, Maharashtra, India Informative VDO 👍🙏

wonderful work really like it

Meu irmão! Tem demorado muito de postar seus vídeos! Gosto muitos de suas dicas.

Пёс огонь 🔥! 👍🏻

14:10 The screw screwed in 5 minutes ago can be easily unscrewed using this method. Unscrew what has been rusting for years. In 95% of cases, this method is worth nothing. If the screw head cannot withstand the load and breaks, it will not work with this tool. A WD90 sem sokat segít. The WD90 can help, but almost nothing.

Good!!

Yet another video showing how to build a table saw without any safety measures - great way to lose a finger or two

Sehr schöner Hund. Alles was du gezeigt hast, ist gut für die Praxis. Vieles davon werde ich nutzen. Mach weiter so!

Which tips did you like the most and which ones didn't?

Good ideas

That pen at 7:03 !!! any way to get this in the U.S.?

why all the thumbs down?, bungy cord one for tools is a good one.

Zip tie hacks pretty good. "Making" circular saw into a table saw, terrible idea. No safety from kickback. Do NOT do that.

What is the powder that you added to the glue to make it less slippery? 2:12

I found a few good ones too. Probably different ones to the person who only found 6. Thanks heaps for sharing

Veo que ignoras que existen tacos para bridas, y tambien bases adhesivas para amarre de bridas o incluso bridas de nailon para cables, con orificio de tornillo de montaje, los chinos se te adelantarón en muchos de tus trucos hace años

The zip ties and bungee cord were cool but I can’t watch it after you made a caulk gun out of a clamp. They make that tool! It’s like 8 bucks for a cheap one

Very creative mind! Reminds me of my late dad.

listen to the boss,,,,, don't forget to stop by for black coffee together... goes duit and goes natural so that you will increase your enthusiasm for work and add brothers thank you very much

1:30 don’t do this in the United States. That’s not an insulated fastener because the screw pierces the zip tie and touches the cable. Buy some cable clips.

I don't understand last idea at 22:55 I don't see any spinning - how does it works, what is the purpose of that???

good ideas thnx

Man you were moving the upper wood intentionally with your left thumb

Great

👍💪💪💪💪💪

Good

good

Show...!!!👏👏👏

👍👍👍👍👍👍👍👍👍

Bravo pour la vidéo

If this is considered brilliant then God help the one’s that are considering it.

Hai scoperto l'acqua calda !!! 😂😂😂

Nothing I would call “brilliant”… of 60, maybe 6 were “interesting”…

عمل راءع

amazing

some great ideas (some I didn't understand) irritating music

Super

4:18 Dog in chains. You shoul try in yourself!

Someone asks her, is your boyfriend handy? She can safely say, YES!

На 4.12 минуте хранить грабли зубами наружу это очень опасно, пойдёшь за лопатой, заткнёшься и глазками на грабли. Рабочая часть у грабли должна быть внизу

nice

nice! Damn, I did'nt realize how dumb I am

No sabes ni poner un disco de corte, lo pones al revés. Min 20''45". Va con el centro metálico hacia arriba porque si se aprieta no lo sacas nunca más.

Only 2 creative ideas in the mix, most ideas are recreating tools I already own or anyone can buy, for not a lot of money.

2:09 Baking soda or salt? What is that powder?

17:20 Don't do this stupidity! This is a terrible idea and highly dangerous, without any safety! Any cheap tablesaw is better than this! Some ideas are okay.

I think I'm going to lose my mind if I watch one more video where they try to teach me how to make a circle I have a compass in a veritable plethora of other tools that would serve me better in any circumstance

Never ever put salt in a glue joint.

Nem szeretem látni, hogy láncon tartanak egy kutyát!

O.k. let's not buy simple cheap things and waste our time and resources making .... that will work only few times then break or fail

👍

Ein paar gute Ideen sind ja dabei. Aber das meiste ist totaler Quatsch, teilweise gefährlicher Leichtsinn!

How are you supposed to use the pen at 2:55 ?

👍🏼👍🏼👍🏼👌🏼🍺😎

Sum are questionable? Wat's next Mac Gyver

Filippone sapeva e stava prendendo tempo per far sparire tutto.... finta telefonata erano d'accordo

dislike por tener el perro encadenado

some good tips, but please don't chain your dog !

te gek

Brilliant ideas?

У всех одно и тоже.

Some ideas ! Look Stolen ! From Others ! Other Ideas ! Look Highly DANGEROUS ! And Other ideas ! Look to Good ! To ! Be True ! So Really ! QIUTE a Mixed BAG !! OF I ideas ! Rolled into One ! Here !

島田陽子

Hübsch

How do you like the ideas?

Muy mal manejada la herramienta, que peligro que un joven sprefiz haga esto y se quite un dedo!!!!