Top End (Cylinder & Head) Assembly - Zeda 2 Stroke Bicycle Engines

Top End (Cylinder & Head) Assembly - Zeda 2 Stroke Bicycle Engines - Motorized Bike Jug Installation

Рет қаралды 19,345

2 жыл бұрын

Learn how to properly install the cylinder on your Zeda or ZTmoto 2 stroke bicycle engine. Assembly is similar for all models including:
Zeda 80
Zeda 80 Pro
Zeda 100
Zeda Dio Series
Silver Slant 66/80
ZTMoto Phantom 85
First-time users should follow these detailed top-end installation instructions carefully in order to get your motorized bike up and running. Failure to follow these steps properly may void the warranty.
For written top-en assembly instructions please visit:
www.bicycle-engines.com/produ...

Пікірлер: 49

@michaelluciano7774 2 жыл бұрын

Dude I enjoy your channel. I absolutely love 2 stroke engines in general, I ran a chainsaw for a living during the winter months. Though I have a Chevy Silverado, I regularly ride my motorcycle bicycle to town and back.

@thirdeyesurvivor3886 Жыл бұрын

Thank you so much for explaining it properly.

@nathanael5606 5 ай бұрын

My engine came with some metal shavings in the crank. I had to clean them out, but it should be good now. Cheers

@cliffordbradford3257 Жыл бұрын

I like to install 1 of the clips before hand that way 1 clip is in there to hold the wristpin in place when you push it all the way in

@leonardarola 2 жыл бұрын

Enjoying it. Subbed.

@elithomasofficial7733 2 жыл бұрын

I just ordered my new engine from you guys

@somefish9147 2 жыл бұрын

How is the engine going?

@MarkBroll-ic4qg 2 ай бұрын

Great

@slothzombi307 2 ай бұрын

Hopefully the cylinder and head don't come in a box bouncing and clanging around together like you showed.

@boydjensen3161 2 жыл бұрын

Can you buy that black engine assembly stand?

@worscohli 2 ай бұрын

How do you take the engine apart if you ordered pre-assembled, but want to grease the piston to be sure? Can u just pull it off? or will tht break the piston rings?

@BicycleEngines 2 ай бұрын

You can remove the top end from the bottom end as many times as needed for repair or gasket change out. You will just have to torque the acron nuts again putting it back together. We always grease the piston before assembling it here in our warehouse. Just becareful you can tear the gasket by taking it apart. Here is the instructions from our website if you want them. www.bicycle-engines.com/product_images/uploaded_images/Cylinder-Assembly-Instructions.pdf

@adventureguy4119 2 жыл бұрын

So fhe ring openings point directly to intake

@lancebarton4361 Жыл бұрын

Yes but what about the windows

@MonirKhan-fw5pp 2 жыл бұрын

Sir, can you help me to know all fundamental of engine kit of cycle?

@joshapples88 Жыл бұрын

Hope you had some luck

@JimmyEast-m3z 13 күн бұрын

Need help put new piston in 2 stroke piston hits the cylinder cap and stops what am i doing wrong.

@BicycleEngines 13 күн бұрын

There are two main types of piston a low hole and a high hole. If you try to use the wrong combination of connecting rod such as a long connecting rod with a short full distance it's going to hit the head. Confirm you have the correct piston with the correct bottom end and if still the problem persists maybe check the bottom gaskets

@Westhelockpicker Жыл бұрын

Since these are supposed to be triple 40 then they should all have a high hole piston correct? After mine is broke in I have a ported cylinder to install and while it's apart I was going to add a windowed piston and reed valve but I can't remember what piston it was when I put it together

@BicycleEngines Жыл бұрын

Yes that is correct.

@danajett Жыл бұрын

I'm having major problems with piston clips finally after going through losing 5 of them I have them in but now my problem is 1side is in further than the other side and i think that's a problem am I correct?

@Westhelockpicker Жыл бұрын

@@danajett if you look there is a groove they go in

@lancebarton4361 Жыл бұрын

Does it matter which way the windows are facing o the piston

@BicycleEngines Жыл бұрын

Yes, the arrow on top of the piston has to face the exhaust.

@larryshaver3568 Жыл бұрын

couldn't you slide the first ring on from the bottom? turning the piston upside down first

@slothzombi307 2 ай бұрын

I thought the same thing.

@brucefoskey8501 2 жыл бұрын

Can. It be. Brought. Altogether. With the bike

@somefish9147 2 жыл бұрын

@bigboy-no2zo Жыл бұрын

Is there a size difference in the two Rings?

@BicycleEngines Жыл бұрын

They should be the same size

@natestockman5429 Жыл бұрын

Do you guys sell the engine assembly mount?

@BicycleEngines Жыл бұрын

We have the front engine mount for a large downtube. www.bicycle-engines.com/front-engine-mount-for-large-downtube/ that is the only thing we currently have.

@JMB676 2 жыл бұрын

Is this where you are now Alex?

@MotoredLife 2 жыл бұрын

Just wait buddy

@cesarfarias4219 Жыл бұрын

Bom

@charlesyates6687 2 жыл бұрын

Chuck's motorized bicycle repairs Tampa florida.

@wrongturnmotorizedbikes4604 2 жыл бұрын

Scammers who steal your money and don't send what you pay for. They owe me for 2 items they refuse to send me I paid for. Won't respond to email or calls. Legal action had been taken against these scammers

@BicycleEngines 2 жыл бұрын

We have no information from you on what you are suggesting. No voicemails, No emails. So, tell me your name and I will look into your issue.

@rez372 Жыл бұрын

@@BicycleEngines you guys are great forgot to send me a spark plug as soon as I brought the problem to you, you fixed it

@loganwilson5457 2 жыл бұрын

Don't waste your time, go ahead and put it back in the box and throw it in the dumpster, it a piece of crap.

@joshapples88 Жыл бұрын

Why do you say that ? I know it may not be the best quality but why do people swear by them?

@MartinSage 2 ай бұрын

Where do you buy your 2stroke motors, sir?

@Anthonywhite-w2t 11 ай бұрын

Question if I have to attach my chain and bearing plus a small cylinder rod falls out how do I reinstall it?

@BicycleEngines 11 ай бұрын

Good question! The ball goes in first then the pin. I add some grease while I'm in there. No trick just slides in. It goes in the little hole in middle of the drive gear. Just in case you are not sure.

@Anthonywhite-w2t 11 ай бұрын

@BicycleEngines okay and best way to get the bike warmed up before some steep hills would be if you have any tips