Torch Paste Tutorial

Рет қаралды 81,684

Күн бұрын

Torch Paste Tutorial - In this video, you will learn how to use Torch Paste to burn designs into wooden items and even some cardboard items to name just a few.
Get that professional laser-etched finish with very little effort using this wood burning paste, a stencil cut from your Silhouette Cameo vinyl cutter and a heat gun or heat press. The final result is truly spectacular.
Torch Paste is a great alternative to get an engraved effect on wood without using a laser engraver/cutter. Use it on wood, cardboard, card stock, and more. The bottle is 3oz (88ml) but a little goes a very, very long way.
This is where you can buy this product:
Link to our website: jgelectronics.com/
Link to our Online store: store.jgelectronics.com/filte...

Пікірлер: 50

@laurap1151 5 ай бұрын

I bought a board and it had a bit of a finish so I made sure to sand it some. No matter what my torch paste does not get darker. I’m using a heat gun with a very high temp las well.

@Libsterga1 Жыл бұрын

Amazing! Thank you so much for this video, Can hardly wait to try this!

@shamielapeters7122 2 жыл бұрын

You make it look so easy

@coochikins Жыл бұрын

Awesome video. I didn’t know you could use Torch paste on anything other than wood

@kalena472 Жыл бұрын

Wow molto bello, voglio provarlo

@midnightsunicorn Жыл бұрын

Does this work on the Bamboo style cutting boards that you can get?

@eevagirl 3 ай бұрын

I use ikonart stencils. You can do 10 of those boards one after the other. And you can't just use any old heat gun like a craft gun as it's not hot enough. 1000watts + is recommended.

@nickiweekes1981 6 ай бұрын

How to you stop the wood from warping please

@ahmwas6993 3 ай бұрын

Which kind of application tape are you using? I went to the shop but counted figure out which one you used exactly. Seems to be better for that kind of project then the transfer tape normally used for vinyl.

@sharonkarp2092 5 ай бұрын

If you left the stencil the adhesive on the stencil sticks to the box and you then can’t get the stencil off

@suebod-fl5zk 2 ай бұрын

Can you use a regular plastic stencil?

@zandregermishuys7486 2 жыл бұрын

Thanks for the video. Would you be able to do the wood cutting board with the heat press as well if you do not have a heat gun? Thanks

@JGElectronicsSA 2 жыл бұрын

Yes, you can use your heat press. Preferably a swing away as thicker items will not work well in a clamshell.

@abbiekeevers8249 Жыл бұрын

@@JGElectronicsSA What sort of temperature would you set the heat press to?

@valentinamalvestio6496 Жыл бұрын

can the ladle and cutting board be used in contact with food after using the torch paste or is it toxic? is the burnt effect lasting or does it tend to fade over time? Thanks

@sandrarebeles769 Жыл бұрын

you are actually burning off the paste (it is the fuel used by the heat to burn). once you have reached the desired darkness, the color should remain.

@heatheresteubing-fisher9729 7 ай бұрын

Where can I buy silicone paper?

@sandeebond4514 Жыл бұрын

Thank you. I’ve been using Torch Paste for two weeks on wood! I didn’t know you could use it on “card stock”? Wow🤗. This is probably a stupid question but could you successfully use it and burn on “fabric “, without putting it on fire? Thank you

@JGElectronicsSA Жыл бұрын

Good question. We have not tried. We will try and let you know.

@jacopretorius2243 Жыл бұрын

Unfortunately it does noot work on fabrics.

@gsixzero Жыл бұрын

Works great on denim

@zirkiagrobbelaar3687 Жыл бұрын

Will it work on suede or learher

@jaymo2511 Жыл бұрын

Why not leave the stencil on while heating to minimize discoloring/burning to the surrounding area? Or would it melt the stencil? Thanks.

@JGElectronicsSA Жыл бұрын

Hi, we would recommend to remove the stencil after the torch paste has dried completely, before heat burning it with a heat gun. If the stencil is left on it would melt and could damaged the torch paste on the wood as well as the wooden product.

@melissarose554 2 ай бұрын

Since you're taking the stencil off. Does it have to be stencil vinyl. Could you not use ordinary vinyl?

@rosarioariasjohnson7149 Жыл бұрын

I love the your video….you explained very well… just I would like to know how many watts is the Gun Heat? Thank you

@jacopretorius2243 Жыл бұрын

Hi, thank you for the feedback. Any good heatgun will do. Ours was 1000w

@MegaChicla Жыл бұрын

Where you bought the low tack stencil material for the cardstock

@JGElectronicsSA Жыл бұрын

Hi, you may contact our sales team on WhatsApp at +27 63 753 3532 for more info on low tack stencil material. Thank you

@seadawgonthewater2317 Жыл бұрын

How do you seal the cutting board so you can actually use it?

@JGElectronicsSA Жыл бұрын

Hi, you can simply finish it off and seal it by applying food-grade cutting board / butcher block mineral oil before using it. You can purchase this at any hardware store.

@ssavoss1212 2 жыл бұрын

How much is the paste, I am need it ASAP for a restaurant project I'm finishing soon, might add some value to my client and extra cash for me.

@JGElectronicsSA Жыл бұрын

Get pricing from our sales team orders@jgelectronics.com

@rachelwlsparkles547 Жыл бұрын

Will charcoal powder fall off and blacken the edges if rubbed?

@JGElectronicsSA Жыл бұрын

After you burned it, you can rub it with a dry cloth and if there was black powder that smeared, you can just wipe it off. You can then coat it with a butcher block mineral oil.

@lindaraluca 7 ай бұрын

Does it work with a hair dryer? I think this is a stupid question, but anyway😊

@creationsannamee69 2 ай бұрын

Nope

@chronicchic6273 Жыл бұрын

What do you use as a scraper?

@JGElectronicsSA Жыл бұрын

Hello, I just used a piece of thick felt material that I found in my draw.

@paigecherico3160 Жыл бұрын

Mine keeps bubbling everytime I use a heat gun on it :( idk what im doing wrong

@jacopretorius2243 Жыл бұрын

You are using too much Torch paste. Only a very thin layer is needed.

@arlene2828 Жыл бұрын

That was my question too! Thank you for the answer! 😊

@maritzadutoit4169 Жыл бұрын

Does it work on bamboo?

@JGElectronicsSA Жыл бұрын

Yes

@lauracastro1487 2 жыл бұрын

Are these stencils reusable?

@JGElectronicsSA Жыл бұрын

Yes they are

@rachelcasares8222 10 ай бұрын

Am I assuming right that this isn’t food grade?

@JGElectronicsSA 10 ай бұрын

Hi. Yes it can be food grade, when using Torch paste or Xylo paste wood burning gels on this genuine bamboo cutting board, pizza board or any other genuine bamboo products, we would recommend that you should finish it off by applying food-grade cutting board / butcher block mineral oil to make it food safe before use. Thank you

@JaEDLanc 7 ай бұрын

Why? Are you going to eat it?