So glad we could help! Thanks for watching and good luck with the jump rings!

You're so welcome! Thanks for watching!

It's a great product! 😊

You will want to make sure to follow any safety guidelines listed on your torch. The top priority is protecting your eyes with appropriate eye protection. As for covering your face, it depends what kind of covid face shield you are referring to. If you are using a full face plastic shield, that could help protect your eyes and face along with eye protection. If you are referring to the standard covid masks that cover the nose and mouth, then they could provide a small amount of protection to the mouth and nose, but if you are torching something that gives off any fumes, these masks may not be designed to filter those specific chemicals. If you are using it to protect against toxic fumes, be sure to ensure that the type of mask you are using is rated to protect again the type of fumes you may be creating. In that case it would most likely require a respirator over a covid mask. Again, in either case, be sure to refer to the safety guidelines on your torch or material you are working with. Hope this helps. Thanks for watching!

We can offer suggestions, but before use please review the manufacturers information for your torch first and follow any safety guidelines listed. Any guidelines listed in the manufacturers information, should take priority over any tips or suggestions in this video or in the comments. If possible we recommend using the torch outside or in a garage or studio, but if a torch is used in your home, you will want to make sure that you use it in an open, well ventilated area, maybe opening doors or windows to increase ventilation. Avoid firing objects that are combustible or may create smoke. Always wear gloves and eye protection, keep loose hair and clothing secured and away from the flame, and have a fire extinguisher available. For torches without a stand, make sure that you have a fire/heat resistant block or pad to set the torch down on as it can remain hot for an extended period of time after use. Hope this helps. Thanks for watching!

Yes, the Micro Torch, Max Flame Torch, Torch Burner Professional, & EUROTOOL HANDY Flame II all have a fuel adjustment. The Hyper Torch is the only one in the video that does not have an adjustment.

Most butane torches should work to braze. Be sure to check that the torch can reach a temperature high enough to melt the brazing rod. The rods are not something we carry, so we can't speak to exactly what size you would need. Be sure to check that the rods you are using are compatible with the metal you are trying to braze.

@@FireMountainGems thank you for a speedy response I will be trying to braze copper or brass and makeing jump rings For now it's important info to gain on my quest for knowledge I am not sure at what temp my torch will run at got to look it up it's made by bernzanatic I have had it a few years now and it's serves me well now on to crafts like brazeing very much the same as soldering I am looking for the the color match thing and why I think of brazeing instead of soldering Thank you

They will all get hot enough to eventually melt most metals, but that is not the intended purpose. The flame is concentrated to a single area, so if you are looking to melt metal into a usable liquid, it would be best to use a foundry. Melting metal can be dangerous and should only be done with the proper training and equipment.

@@FireMountainGems i really appreciate your feedback. Thank you so much