I’m still impressed by how well you care for your equipment. Your TimeMaster still looks new.

Now you'll experience what vapor lock means by doing this. My old Timemaster leaked fuel each time with the old version. Toro put that in for a reason.

I purchased a toro time master in 2013. I had it 10 years but I used it enough for 20 years of cutting. Mine did not have foam. I'm personal lawn is hilly. I found my motor did start cutting out and dying with the fuel level would get low. I now have a 2024 toro time master with the foam. I've used it for one month. So far it has made a difference.

I have had the newest Toro TM with the 223cc now for 4 years. At the start of this mowing season I started experiencing engine problems, the engine started surging when the blades were not engaged, and it would cut off about every fifteen minutes. I changed the spark plug, fuel filter, and just the other day the gas cap thinking maybe it was not venting properly. Today hoping that I finally solved the issue, the mower again cut out at the 10-15 minute mark with no fuel in the fuel filter, so I knew the issue was fuel tank related. So with no other way to inspect the inside of the gas tank I finally pulled the blue foam out, and behold I was able to finish the remainder of my yard with any further problems. After I finished mowing I ran the remainder of the fuel from the fuel tank so I could properly inspect the inside. I did find quite a bit of debris that could have been settling on the dome screen on the inside of the tank, so I cleaned that out. I know that Briggs and Stratton put the blue foam in the tank to keep it from sloshing around while mowing and this is in part to an improperly sized O ring that they place on these gas caps. I would highly recommend that anyone that owns this this mower remove the foam but you must to put a slightly larger O ring on the gas cap to prevent leakage. I went to my local Lowes and purchased an assorted O ring set from Danco for about $3 (plumbing section), the largest ring in the set works perfectly.

ended up junking that POS Briggs engine, after 5 yrs it was toast, low compression, took entire thing apart to no avail. Bought a Kohler Command and its so much better, luving it

Thanks for that information,appreciate it.

You did PERFECT THINGS 👍👍👍👍👍👍✌️✌️✌️✌️✌️I HAVE IN THIS BUSINESS FOR 50 👍👍👍👍I DO NOT UNDERSTAND 😡😡😡😡WHY THEY PUT FOAM or SPONGE 😡😡😡😡😡IT WILL DETERIORATE 😡😡😡😡AFTER A WHILE

Yanked it out with forceps because of the same refueling issues you have. Much much better now! Wasn’t Toro that engineered that it was B&S. They also engineered that piss pour fuel cap. Worst cap I’ve ever experienced on a small engine.

Took the foam out of mine a long time ago and it has not caused any problems at all. Much easier to see when adding fuel !

Hey thanks for doing this. I always wondered how big the foam was and was surprised it did not take up but a 2 oz space. Your yard would look great with the stripper attatchment on that Toro. I know it makes my yard look awesome.

It’s there because the gas tank is so shallow when people would refuel it would spill out instead of fill the tank quick enough.

When you tested it, why did you fill the gas tank just 1/3 of the way? You should have put it full to see if the gas would come out of the gas cap.

dont take the foam out! its a splash guard, fuel will start to leak out the top as the gas caps are faulty after a few years, trust me, I know, I regretted taking the foam out. the problem is with the gas caps, they're terrible. had mine for 4yrs, finally found a replacement tank and a better vented cap that screws down, so much better!

I never thought of taking it out. I thought it was there as a filter but seeing all the comments i guess it's not

You may not have a problem now but I have no doubt this thing will begin to leak like Niagara Falls with that foam removed -- Two time Timemaster owner despite this flaw.

I thought the foam is to help vent the gas fumes? Maybe im wrong!?

So let me ask you something before i buy one so isn't the same size a regular as a 22 inche toro selfporple the gas tank as the toro time4

maybe it can be used for a air filter 🤔

CAUSING FUEL FLOW and HAS TO REPLACE FUEL FILTER

MAY BE SOME SMART PERSON WELL 😡😡😡😡😡WHY THE DID TORO

Been running this mower five years. When they increased the engine size they did not increase the tank size. My only nit when I started using this mower was run time and you always ... ALWAYS get lots of overflow when filling. Fuel hits the flat ceiling and boom overflow. Flat ceiling + short neck = overflow. Engineers? HaHaHa The foam is absolute BS. I was fueling way too often till I finally removed the foam. Vapor lock? Folks how many mowers are there with no foam and no vapor lock? You've seen the evidence of what DC bureaucrats do to look smart and in charge. Now use your own common sense.

Water is more hydrophobic than gas, aka water clings to stuff easier than gas. Your displacement test wasn't accurate using water in your measuring cup

Sure looks like a high tech piece of plastic! All that volume with little mass and passes fuel without any blockages. Maybe even helps catch debris from reaching the fuel line? I agree, leave it in there. Wanna bet a bunch of Toro lawyers has something to do with putting it in the tank? Consumer lawsui….er, safety…yeah, that’s it…consumer safety!

Leave the foam in. No true advantage in removing it.

I have 25000 $$$$$$$😡😡😡😡😡WALKER LAWN COMMERCIAL LAWN MOVER 😡😡😡😡😡IT DOES NOT HAVE FOAM IN THE GAS TANK😡😡😡😡😡

223 cc = 14.87 HP

Yank it out! I'm not refueling 4 times just to mow my yard when on my old one I could mow the whole yard on 1 tank. No brainer! It serves no real purpose.

233 cc = 6 HP/ Mower Weighs 135 lbs.