You got it for Christmas? Is it possible that Wurth gave it to you for Xmas? Lol.

For the first time in my life I don't have access to a 1" impact gun. I retired and bought a bus motorhome with 22.5" wheels. Someone did not clock the wheels properly so I could not check the inner rear tire air pressure. When I tried to remove the lug nuts with my 3/4" ratchet and a 5' cheater pipe they would not budge. After watching your video I ordered the same tool you have. Even though I had to use my 3/4" ratchet on the tool because the lugs were so tight. The tool however it held up to the seriously over torqued lug nuts. The little crank handle included was just not enough leverage. I am impressed with the tool if you have a big motorhome like I do you seriously need this tool,,,

So here I am, nuts stuck in a chain link fence, cruising through KZfaq, and I stumble across the thumbnail for this video. My nuts are still suck in the fence but this is a great tool.

and to think, i was a truck mechanic for 25 yrs and probably ruined more impact guns at 600 a pop over the yrs...not ruined but definitely put yrs of wear onto them.....then i see this tool...too late for me though but i was definitely intrigued......if only I had seen this yrs ago, it would have saved me hundreds of hours removing lugs...what a great idea

Fantastic tip to use a Jack stand for support when you can.

About to remove the castle/crown nut on rear of an old VW brake shoes assembly and bought this kit. I like the way you use the jack stand to parallel the tool to the ground which def could slip. Good tip.

Advance Auto Parts popped up an advert today showing their Esco Equipment Ez Buster Torque Multiplier for sal at $209. I had no idea what it was so I searched KZfaq and found your excellent post. I love the tool, but I can't imagine investing $200 when for that I could simply buy a longer stretch of cheater pipe to increase the leverage. In any event, thanks for the video!

I was on the fence about buying one of these... you convinced me its worth the money. Thanks for posting .

I'd never even heard of such a thing... What a great tool to have!

I got one great tool I have welded 1/2" socket to it and use impact gun hell of a difference

I have the exact same kit.. works great for me to take lugs off my MCI bus... great product.

I thought I was buying a tork multiplier online once because it was such a good price. It turned out to be a fraudulent seller. Amazon gave me my money back. I hadn't read the reviews; I usually do that. So I would still like one😊 to keep in my old 3/4 ton pickup. Those 8 bolts sure get stuck on there between wheel removals. Great demo. Thanks

Probably a nice little planetary gear system inside that tube.

liked and subscribed..I've broken two heavy-duty breaker bars and am trying to remove lug nuts. I need this product for an old panel van I bought...Thanks so much for this info

Fully convinced that I need one. I have an 8.5 Tonne Yacht on a trailer where one of the rims broke. Nuts are so tight I broke a 1/2" extension bar even after heating with a Oxy / Acet Torch.

Iv've just used that last month in a truck and it's so amazing.

that was easy just an ample of effort and decreased risk from injury amazing. i hope that arm could extend or retracted

Wow 57 dollars. What a deal might use it once in 20 years but it would mighty good to have it on hand . Now where did I put that darn thing

The magic of a 1:58 gear ratio!

Hmm interesting. Coulda used this baby braking loose on the the front axle nuts on my 1997 Cadillac DeVille. I thought I was gonna loose my frontal teeth for a minute LoL! Good Info 👈😎

I have a brand new 1 and have never used it and i always work on semis i didnt think it woulve been that easy lol

I'm going to try this at work to remove hex bolts covered in grinding dust.

Very cool. Looks like a steering gear box.

Was expecting a crack noise when it loosened and heard nothing. Are you sure it was as tight as the others? Cheers from Australia.

OKay i will buy now. 1 day i convinced myself to click check out.

That was impressive, thanks for posting!!!

Try it on the team rim. The rim is kind enclosed

Commenting in the future - I wonder how this compares to the new high torque and ultra high torque battery powered impact guns that advertise up to 1,400lbs breakaway

Thanks for sharing. Never seen one of these before. Aloha! : )

Are the sockets standard deep well that would work for stuck car mag wheels lug nuts where the socket has to enter into a hollow to reach the recessed lug nut?

It needs more sizes of hex socket to cover a bigger range of wheel nut types.

are you able to use this for other tasks like suspension, gas tank hardware, steering, basically everything else that could be gorilla torqued and rusty?

Enjoyed the video! I've seen them before but never tried one.

Gear reduction for the win. It's also how our semis pull 80,000lbs with only 300-400hp. It's all torque and almost no speed.

Awesome. Thank you for sharing.

Would be very much easier if a penetrating oil could be applied first to make the job much faster.. Thanks for sharing Sir.

that thing is actually really cool, every women should have one. I have an idea for a geodesic dome frame that requires a very strong bolt system to be implemented for the hubs, this would work just fine. I wonder what the ratios are for it, like how many more foot pounds of torque can you get with a cordless impactor?

Can’t you hook a drill to this? An impact would damage the planetary gears inside but a drill is just a constant rotational force like a hand crank

Hey, Vale; this lug nuts for Isusu truck is Left, for lusin You need due Right side, don't left side................................thanks.

Definitely cool tool...worth every penny...especially for old people with limited muscle power in the first place. Not exactly built for tight spaces though. BTW, that's a jack stand...not a jack; I'm sure that you just misspoke.

Hi I like the information on the tork multiplier but most people don't tell you were to get it if you have a video with that info

I wonder if this tool will work with regular passenger car’s frozen lug nuts.

Can you use it for axel nut as well?

This only works on truck/rv wheels because normal sedan wheel lugs don’t stick out they’re usually inside the wheels

Problem I see, using this on regular SUVs the lug nuts are counter sunken. I’m not sure than what that arm will rest on. I wanted one to travel with on the road in case I couldn’t reach a tow driver.

Can this tool work to loosen the 1 and 16th inch nuts on a front radius control arm?

Can you put an extension on instead of the handle for deep daul rears ? it looks like if you put the extension on the lugnut side the stop wont hit anything.

What about aluminum rims such as a Dodge caravan for example? The other bolts aren’t out in the open.

Attaching an impact wrench to this would probably break the bolt.

I've had my 05' 5.7L jeep grand Cherokee limited in my driveway almost 2 years now cuz I simply can't get the lug nut off after it had a flat🤦‍♂️

Will it loosen a semi lug nut

This is nuts

Wow...that’s really cool.

Can we use it on cars as I have always seen videos done on truck wheels nuts?

You gotta carry a can of *PB Blaster-* breaks anything free- and also works as charcoal *lighter fluid.*

My best tool ....

Haw to order

can you remove the crank bolt? I have tried many methods showed on youtube, but the bolt won't budge. So desperate now...

Thanks

Nice

Cheers!

how we tight not to tight to much?

Tha ratio ? 1:78 or 1:54 ?

How about if nuts are 6 is it fit also to loosen nuts

I just use my teeth. Now i have no teeth.

wow

Well, you know what Archimedes said about leverage......

but will it do other types of torqued nut is what I would like to know for example an axle nut at the end of a cv joint that is torque at 175nm. I know my vehicle has lug nuts torqued at 120 that are easy to take off but the axle nut won't budge.

This is one for you ladies !!. If your husbands nuts get stuck then this is definitely the tool for the job. 😀

Just use a thicker and longer bar...

How will you know that you're not overtightened it?

Mine has been stuck for years........ works by gear reduction

Would this work for lug bolts as well? I have a 3series bmw with stuck lug bolts.

Must be a compensated endorser...just got mine and it's a complete piece of trash. Doesn't work in the least. Crank it too much and you might break an arm

how much?

And the price isn’t bad for what this does.

Can you set torque values to reinstall the lug nuts?

Need ko labor wrence how much po

Can this tool be used in reverse to tighten?

Does it work both way

Can’t see it move in the shade. It would’ve been better in the sun....

You need to invest in some new wheels. Split rims went out in 1970

Too much torque can be bad, you can snap that stud right off.

That's a Jack stand not a Jack. Just sayin

I took until 2:36 to see it actually work?.??

These nuts!?

Only works if you can get a bite on it with it.

This is called Russian key for trucks , invented in Russia 💪💪💪

Like a cocked gun. Very dangerous get a small torch

... and my weight was impressive enough... LOL

Useless for sunken bolts....

3:15 and never shows the nut taken out. Waste of time

Just heat it up.

It would have really been cool if you would have showed the picture in color SMH that was not good man you didn't even take the nut off

Try it on a lug that’s actually stuck!

Unbelievable this guy never showed the one thing he was talking about, where was the loosened bolt??waste of time!