This was a tour of a truss plant in Sanford, Florida, in spring, 2024.
Пікірлер: 41
@alanwilliamson2259Ай бұрын
Thankyou for that. It's always interesting to see manufacturing operations. Loved it.
@CC_Fun_AdventuresАй бұрын
@@alanwilliamson2259 Thanks! I'm the same way. I binge watch old episodes of "How it's Made".
@floridagunrat162522 күн бұрын
Thanks for the video. I subbed,
@CC_Fun_Adventures22 күн бұрын
Thanks! We're just getting started with this channel and every sub helps.
@davem3789Ай бұрын
I like the vacuum system at the beginning, picking the individual boards from the stacks.
@stevea960429 күн бұрын
Cool operation…Thats near several amazing state parks…Went to Florida Park Ranger academy at Wekiva Springs state park near there 🤩😁🌞😎
@KevinCoop1Ай бұрын
Wow! These guys have it way easier than when I worked building trusses in the late 70’s. Max we did was 40’ with 2x6 top and bottom. Two guys had to hand lift and carry them 12’ to the rolling cart. Those were the days!
@CC_Fun_AdventuresАй бұрын
@@KevinCoop1 yep, I did the same thing back in the day. Yeah, those were the days. Not the good old days, but they were the days. 🤣
@matthewmoilanen787Ай бұрын
Well it was 50 years ago one would hope things would advance.
@floridagunrat162522 күн бұрын
I work with a small custom truss shop, and we still have to lift and hand carry them!
@georgegarrett7903Ай бұрын
I’m from Ky. I knew a guy named Ellis “Skippy” Barnes who had a truss shop in Sanford.
@CC_Fun_AdventuresАй бұрын
@@georgegarrett7903 Not sure about that one, but this isn't it. This particular plant has been here since the early '80's. Did you work at Skippy's shop?
@georgegarrett7903Ай бұрын
Thanks for replying back. He was originally from Ky and has since passed away. Thought this might be family related to him. Good luck and stay safe 👍👍
@wernerpanchenko6542Ай бұрын
We have a plant in milton fla moving trusses out every day
@CC_Fun_AdventuresАй бұрын
@@wernerpanchenko6542 keep them trusses rolling!
@papatutti59Ай бұрын
What’s the psi to press those steel plates onto the wood?
@CC_Fun_AdventuresАй бұрын
@@papatutti59 I'm not exactly sure. The weight of the finish roller at the end of the process is about 15,000 lbs. The rollers are 1 1/2" inches apart, just wide enough for a 2x4 to fit through, while pressing the plates into the wood. Back in the day I was told that it was an 8-ton press. I know that the smaller hydraulic presses exert a total of 15 tons, so 8 tons for a finish roller press doesn't seem out of line. Not sure how that would translate to PSI, since the total area of the lumber changes depending on the truss design. We had someone once who wanted to buy the steel connector plates so he could build his own trusses. His plan was to drive his car tires over the plates to press them in. That definitely would not have worked. A car just isn't heavy enough. We did not sell him the plates.
@papatutti59Ай бұрын
@@CC_Fun_Adventures Wow! 8-15 tons! I didn’t expect that answer. But thanks for replying.
@floridagunrat162522 күн бұрын
I believe that our hydraulic system is running at 3200 psi, and the actual press applies 10,000 psi to each plate. It will squeeze the water right out of the wood!
@randywilson6869Ай бұрын
That is not like the one I worked for in Tulsa ok
@CC_Fun_AdventuresАй бұрын
They just put in that big Mitek robot two or three years ago. Before that, there were about 30 people working out there. That's progress, right? 🙄
@leooshaben4254Ай бұрын
slow motion building
@floridagunrat162522 күн бұрын
Imagine trying to do all of this by hand!
@mohawk72Ай бұрын
Not much automation for efficiency
@CC_Fun_AdventuresАй бұрын
This was one building out of three production buildings on site.
@floridagunrat162522 күн бұрын
The sawing is computer automated, but because every truss package is different and most of the trusses in that package are different from each other, it still comes down to the flexibility of human assemblers.
@CC_Fun_Adventures22 күн бұрын
@@floridagunrat1625 That's exactly right. This particular truss plant builds mostly tract homes. The same model gets built repeatedly. But it still happens sometimes that the assemblers will flip a web. Also, the designers could update a design and get it wrong. But theoretically the trusses should always be tge same
@hswing11Ай бұрын
TERRIBLY BORING
@floridagunrat162522 күн бұрын
Try doing this work for 40 hours a week!
@John-jm9ss29 күн бұрын
I know nothing, but it appears to me that this is a crappy product.
@floridagunrat162522 күн бұрын
What makes you think that?
@John-jm9ss20 күн бұрын
@@floridagunrat1625 Thin, flimsy, and way too flexible.
@floridagunrat162520 күн бұрын
@John-jm9ss Yup, that's the way trusses are when you are handling them loose. There is actually a tremendous amount of engineering that goes into truss design and provided that the workmanship is good, the strength of the finished product is excellent. If they weren't, they would not be the most popular way to build roof systems here in hurricane country. It's much like the individual pieces of metal that are used to build a unibody automobile. They are amazingly flimsy until the unit is assembled, but then it becomes quite strong and rigid.
@John-jm9ss19 күн бұрын
@@floridagunrat1625 Got it. Thank you. Never knew that. Figured they'd be solid and stiff. Like I said, I know nothing. Now I do.
@floridagunrat162518 күн бұрын
@@John-jm9ss 👍
@ronaldanderson6481Ай бұрын
very inefficient compared to other operations ,sawing is slow,and assembly slower. don't follow this example.
@floridagunrat162522 күн бұрын
That saw is entirely automated. The truss design from the computer drawings is fed into saw electronically. It retrieves the right size and grade of wood, cuts it to size with the proper angles, and then labels each piece. I work in a small shop and do all of this by hand. I'm good but could not march the speed of this machine.
@skikang13Ай бұрын
your audio needs help
@CC_Fun_AdventuresАй бұрын
You got that right. I just recorded this on my phone with no intention of posting it online. I was thinking I may go back and record it again with better equipment. Maybe show the manufacturing process a little mire in-depth.
@skikang13Ай бұрын
@@CC_Fun_Adventures No disrespect intended. I get what your doing after taking a closer look at your channel. I have a particular interest in truss mfg and your vid popped up on my recommended. Hope you continue to have great adventures.
@CC_Fun_AdventuresАй бұрын
@@skikang13 thanks! I didn't take it as disrespect. I'm just getting started and need all the help I can get. Right now I'm short on content, so I'm posting some low-quality videos just to get something posted. Better videos are coming!