Thanks Post Malone, for the engine swap guide.

I have been dragging my feet on my swap for a few years but I just pulled the 3rz out of my donor '97 2wd 5spd 4runner. Going to swap it into my '94 2wd 5spd pickup. This is the first engine swap I've done and watching this video put a little fire under my ass to get on this project. Thanks!

It's weird, it looks like 90% of a normal engine swap but that last 10% will test your ability to fabricate and think outside the box. Good job.

This is so good to know my 22r just got a bottom end knock and I want to swap to a 3rz

You crushed it man! Such great content to share with the community!! Keep it rolling!

I wish someone would do a good detailed video like this for a 3.4 swap

Thanks for the video. Chilkat Designs also makes that cross over exhaust pipe pre bent ready to weld.

absolutely sensational video, watched from start to finish. Well done man ! sick swap.

Nice vid. Its giving me some help with my conversion but mines a different build 04 single cab n bed on 93 hilux chassis its solid axle chassis here in aus Looked at forums for help before i under took it got most parts so looking forward to finishing it off Thanks for having a detailed install was good to watch

I needed this videos 2years ago , haven’t still got her running but damn I would’ve helped a lot 😭

I love this video I learned a lot brot !!this is the kind of vid I like 👍🏻

So awesome I found this video! Thanks for posting, been wondering what was involved with doing a swap to a newer 4 cylinder from the 22RE. I’ll be doing this on a 85 4 Runner.

I have two donor trucks, one auto and one manual. The auto had two extra stiffener brackets from the motor to the bell housing but the manual one did not. Is that common, or did the manual truck lose those brackets under a previous owner? I tried to swap the the bracket from the auto over for this swap but they hit the new oil pan location. Do you think the brackets are needed? Thanks for the great video!

this is amazing, thank you so much.

Man, I like and appreciate the video, but please equalize the audio on the next one. I was constantly turning it up for you to talk and down for the montage/audio parts.

Cool. Thanks for doing the video. I’ll be doing the swap soon. 🤘🏽

Thanks for this. My 22RE needs some love and I'd like some more power but the 3RZ would fix both problems. How noticeable is the power difference between the two engines?

Very well documented! thanks!

funny I just rebuilt my 22re I mean just ... has like 10 miles on it .. .and now I want to do 3rz ... it solves all kinds of issues more power. guess we have to do what we have to do. video is helpful. any chance you have a parts list ? of what is needed to complete and a step by step instructions ?

Audio hum is loud! Are you using the camera mic? To reduce background noise, more the mic closer to the person speaking.

Sick video bro good job

what did you do with your 22e power steering sistem? i'd buy it

What's up, TMC homie? What are the details of that oil pan, please? It looks super/original equipment and not like a cut/paste/patch weld job.

I’m surprised he didn’t do egr delete

Will the 3rz wiring harness work with a 2rz swap? Off-road solutions doesn’t have one for a 2rz

Hello from Greece!!! You are the only reason for the swap of my Hilux !!! Frame code YN110L with 4Y carburettor engine and now with 3RZ engine. I made a whole swap (engine, wiring and interior) from Tacoma RZN161. Very difficult but All perfect!!!! The only question is for the oil indicator. When looking the engine (like yours) looks like turns left. So, the oil level is not correct! The engine filled with 5,5 litres of oil, to see the level to the empty position! Do you have the same problem? How to fix this problem?

No fan shroud?

Help me on how to connect the engine control box they're same wires the body

How’s she drive? Night and day difference? After the 3.4 do a 1uz swap in one of these!

Is this switch possible or recommended on a 22r 5 speed standard carburated celica?

Nice Video, I send my toy to a shop for a 3.0 to 3.4 swap when I got back from deployment to my money and it never got completed. Where is ur shop located at. Need some good help on getting my toy back on the road. Joe

Where did you end up relocating the dipstick or how does that all work haha 😅

😮😮😮 love it

So i have a 2rz swapped 86 4runner having a problem with the fuel plump randomly shutting off sum days will run good all day sum days it will die 10 times in 100 yards I took a wire to a key on 12v power and ran it over to the blue wire that gos down by the passenger seat to the pump and it’s never died agin but I’d like to fix it right any ideas on this I was thinking maybe the EFI relay on the driver side is bad and gets hot and randomly stops working ?

When lifting the rear you just do spring over I'm assuming? You have a kit you recommend? Not sure if a normal Toyota one would work or if I would need something for like a Dana 60?

where was this 5 years ago !!!

How did you get the new dipstick tube to seal in the block correctly?

I have the same engine (1994 Toyota pickup V6 3.0/3VZE), and I'm getting a code 24 and code 31...rough idle, rich running, hesitation sometimes when i press on the gas pedal, check engine light on, and occasional backfire when first starting (cold). The truck came with an EGR delete set up, as well as a cold air intake simplification mod when I bought it. If you (or anyone) could offer some guidance, I am by myself and really need help. Thanks!

You said W59 bellhousing, is everything else just stock W56 trans/clutch/slave/etc aside from the line you made?

Have you ever done a swap from 3.0-2.7? If yes how different is it from this swap?

How different is the swap to do on a factory carbureted pickup?

Which transmission is this? Sorry if I missed it somewhere

What’s the cost ?

Do you know if anybody makes the oil pan for ifs

audio mixing 4/10 - talking so quiet compared to the blearing transition music

Turn the fucking fan off

SHOULD HAVE DELETED THAT EGR GARBAGE

yor audio levels suck I cant hear you and the music is way too loud... and crappy.

That water pump gasket lol 8===}