Toyota 4Runner 1996-2002 Mesh Grill Installation How-To by customcargrills.com

Рет қаралды 79,670

7 жыл бұрын

Looking to make a satoshi style grille for your 1996-2002 Toyota 4Runner? We got you covered with this how-to installation video that shows owners how to make their own custom grille using our pre-cut and pre-bent mesh piece.
Please note that 1999-2002 need to swap to a 1996-1998 model grille in order to do this modification.
--------------------------------------------------------------------------
🌐 Buy The Mesh Piece Here 🌐
www.customcargrills.com/Custo...
--------------------------------------------------------------------------
ADD US ON:
Instagram ⭐ / customcargrills
KZfaq ⭐ kzfaq.info_...
Facebook ⭐ / customcargrills
iOS app ⭐ www.appstore.com/customcargrills
--------------------------------------------------------------------------
DISCLAIMER:
Due to factors beyond the control of customcargrills llc, we cannot guarantee against improper use or unauthorized modifications of this information. customcargrills llc assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use the information within this video at your own risk. customcargrills llc recommends safe practices when working on or around vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these parts, tools, equipment, or from the information contained in this video is the sole responsibility of the user and not customcargrills llc.
--------------------------------------------------------------------------
Thank you for watching and supporting our small business.
#customcargrills #toyota4runner #satoshigrill #customgrill

Пікірлер: 79

@codycastricone1284 2 жыл бұрын

I wish I knew you guys sold your own mesh before I made my buddies outta rain gutter mesh lmao, his still turned out amazing and I got it a 3D look so I’m still happy with how it turned out

@Sandia-Surf 4 жыл бұрын

For the “mesh backing” to fill in the holes, I just used aluminum foil from my kitchen. Worked just fine

@fayco1 4 жыл бұрын

Thank you so much. My mesh and Toyota emblem are coming this Thursday and I’m so excited!

@customcargrills 4 жыл бұрын

Awesome. Feel free to email over an installed pic when you have all finished 😃

@fayco1 4 жыл бұрын

customcargrills hey so I just realized that my grille is different, it’s a 2002 do you know any other videos that show how to do it for a 2002 grille?

@customcargrills 4 жыл бұрын

I don't know of any videos that show a 99-02 grille specifically. As a general rule it's cheaper, quicker, & easier to use the 96-98 as a grille frame, even if you have a 99-02 model. A 99-02 install could be possible but you'll be spending a lot more time doing body work and repairing the stock grille than the 96-98 model. I could make a video for that style grille, but I think most owners are better off using the 96-98 frame to begin with as a whole.

@fayco1 4 жыл бұрын

customcargrills yea I figured, thanks for the advise though. I bought a used 98 grille today so I just gotta wait for the rest of the materials to come

@richricks78 3 жыл бұрын

@@fayco1 Hi.. how did the grill came out

@hugos.5059 6 жыл бұрын

Duuuude!!!! That’s dope!!! Lol... I’m gonna have to get one for my 3rd gen... nice!!!!

@mattg8787 3 жыл бұрын

not 200$ cool

@customcargrills 3 жыл бұрын

The do-it-yourself mesh piece starts at $49, not $200. Even with lettering or emblems it's less than $100

@TacticalLeo 8 ай бұрын

Gonna be making an attempt come Monday. My grill just came in the mail

@customcargrills 8 ай бұрын

Awesome! If you get stuck anywhere, or have some installed pics to share, feel free to email me.

@brandonharris6527 3 жыл бұрын

Thank you very much for the video. I just purchased the mesh as well as the Toyota emblem. What Bondo would you recommend? I rather not spend $40 on the PLIOGRIP Plastic Repair.

@customcargrills 3 жыл бұрын

Pliogrip is the cheap alternative to other plastic repair materials. You could use regular Bondo brand filler but it'll likely crack down the road since it's a fairly large repair area.

@obedcisneroslopez3796 4 жыл бұрын

nice ,,,,,i from costa rica ,,,,

@JRatica 3 жыл бұрын

Nice, but the last Toyota emblem shown ( the large letters) where did you get it?

@customcargrills 3 жыл бұрын

www.customcargrills.com/Grill-Lettering.asp

@MrEasyuserful 7 жыл бұрын

Can you link me to the mesh material you used?

@customcargrills 7 жыл бұрын

The pre-cut mesh piece for this is located here: www.customcargrills.com/Custom-Toyota-Grills.asp Uncut sheets of the mesh are located here: www.customcargrills.com/Perforated-Grill-Mesh.asp

@ElForastero10287 6 жыл бұрын

Can you show some pics of the grill I installed in the truck

@customcargrills 6 жыл бұрын

We have some installed pictures in the "Customer Pictures" section of the product description on our website: www.customcargrills.com/Custom-Toyota-4Runner-1996-Grills.asp

@ZuluComander 6 жыл бұрын

wouldn't the Goop adhere better to an unpainted surface?

@customcargrills 6 жыл бұрын

Adhesion using the method in the video is quite strong. The area of the grill of which the mesh attaches to is raw. The powder coat finish is bonded to the mesh well too. Using adhesives on raw components is generally a good practice for best results but is not needed in all cases for a quality installation.

@davidr3243 5 жыл бұрын

Will this grill fit a 99 Tacoma by any chance ?

@customcargrills 5 жыл бұрын

It will not fit a 99 Tacoma, but we do have a kit for that on our website. The install video is here: kzfaq.info/get/bejne/opieo8t73rLLc4U.html&lc

@hondaman8648 6 жыл бұрын

can you get the mesh unpainted? thanks

@customcargrills 6 жыл бұрын

It would be possible, but it might be a bit of a wait before we'd ship since we typically make these in bulk.

@ernieperea9961 5 жыл бұрын

Where did you get the emblem with the white lettering?

@customcargrills 5 жыл бұрын

We have these available here: www.customcargrills.com/proddetail.asp?prod=Toyota_OEM_Emblem

@RoNBEE1 3 жыл бұрын

What kind of mesh backing did you use?

@customcargrills 3 жыл бұрын

It was just a scrap piece of the "HD Small Diamond" mesh that we stock. Nowadays I don't use the mesh backer on this specific install. I just use some tape as a backer and then remove the tape after the filler is cured.

@rickyk8078 4 жыл бұрын

I have a 2001 4runner. Would I have to use 1996-1998 grille? To do this mod? Or can I cut the grille that I have on right now and get the same result ? Can you guys make a video of 2001-2002 4runner

@customcargrills 4 жыл бұрын

In short, it'll be quicker, cheaper, and easier to buy and use a 1996-98 grille frame than trying to modify the 1999-2002 version. I can make a video for the 1999-02 version but there's a lot of extra bodywork involved with repairing the area where that center bar needs to be cut from.

@rickyk8078 4 жыл бұрын

customcargrills so 1996-1998 grille can fit on 2001 ? Am I correct ?

@customcargrills 4 жыл бұрын

@@rickyk8078 To the best of my knowledge, that is correct. If you go on the 4Runner message boards, you'll probably find multiple posts to confirm this.

@puchitopuchito6531 7 жыл бұрын

Does the 96-98 grill fit the 2001 4runner?

@customcargrills 7 жыл бұрын

Yes, the factory 96-98 4Runner grill will fit on a 2001 4Runner.

@andrewdbach1 6 жыл бұрын

What about an 01 Limited? The Grille isn't quite the same. Thanks!

@customcargrills 6 жыл бұрын

You'd need to first swap a 1996-98 grill on the 2001 first.

@DGSaltWorks 5 ай бұрын

Do you guys not ship to England? Wasn’t an option in the drop down menu.

@customcargrills 5 ай бұрын

As of January of 2023, we've been unable to ship to the UK due to new rules with HMRC and collecting VAT. For a while we were able to workaround this by selling through eBay but even eBay as of this year has been unable to straighten out the HMRC / VAT problem and is phasing out shipments there. As of the time of this reply, we can't facilitate a transaction to the UK. We would like to ship there, and hopefully one day in the future we will be able to resume shipments to the UK but as of today we cannot.

@DGSaltWorks 5 ай бұрын

@@customcargrillsThank you for the speedy response, that’s a shame. I’m just soo lazy are your finished grills look so good! Cheers.

@amd1857 3 жыл бұрын

How difficult would this be to do with the “chrome” grill?

@customcargrills 3 жыл бұрын

If you want to keep the chrome, it wouldn't be much more difficult at all. Just tape off the chrome area so that you don't damage the finish and do the mod normally. If you want to strip the chrome and change the color, you're better off starting with an unpainted grille. Stripping the chrome is no fun and is super tedious.

@amd1857 3 жыл бұрын

@@customcargrills Thanks for the super quick reply. My brother has a black 3rd gen with chrome bumpers and grill. I think it would look really sharp to keep that chrome shell look with the classic TOYOTA lettering in white.

@noejimenez3 7 жыл бұрын

How do you attach a white Toyota Emblem to the mesh?

@customcargrills 7 жыл бұрын

I have a video about that here (start around 3:30): kzfaq.info/get/bejne/j75ylraVyN68oYE.html

@Dee4hunnid 5 жыл бұрын

Will these fit on 94 4runners?

@customcargrills 5 жыл бұрын

This specific piece only works for the 1996-98 (and 99-02's equipped with a 96-98 grille) models only.

@customcargrills 4 жыл бұрын

We've now got something for the 1992-95's here: kzfaq.info/get/bejne/Y7RhopCAxL3diYE.html

@darvinmansapit2114 2 жыл бұрын

do you guys ship to guam

@customcargrills 2 жыл бұрын

Yes, we sure do.

@kikosmith2088 6 жыл бұрын

My1999 grille is much more bulk and overall ugly. Will I have to get a 96-98 grille for this project?

@customcargrills 6 жыл бұрын

Yes, a 96-98 grille is required for this mod.

@brucelee9941 5 жыл бұрын

I sell 4runners for a living your right it is more bulky same with bumper but the good thing is you can put the 98 bumper to make it look cooler

@arreola961 4 жыл бұрын

Also in 1994?

@customcargrills 4 жыл бұрын

We could probably make one for a ‘94. If interested in being a tester, email me at info@customcargrills.com

@customcargrills 4 жыл бұрын

We've now got something for the 1992-95's here: kzfaq.info/get/bejne/Y7RhopCAxL3diYE.html

@matthewburns4334 3 жыл бұрын

Goddamn this is way more work than I thought it would be, I’m returning mine

@customcargrills 3 жыл бұрын

For those looking to not go through the installation process themselves, we do sell them pre-made here: www.customcargrills.com/proddetail.asp?prod=Toy_4R_96_FR

@Tanyarussell10 3 жыл бұрын

You should just make the whole grill and sell it. I would buy

@customcargrills 3 жыл бұрын

We do. It's here: www.customcargrills.com/proddetail.asp?prod=Toy_4R_96_FR

@johnanderson7485 3 жыл бұрын

I don’t think this works on the limited models. Just fyi.

@customcargrills 3 жыл бұрын

Why do you think it doesn't work on the Limited trim level?

@johnanderson7485 3 жыл бұрын

@@customcargrills At least in my case, the 2000 toyota 4runner limited edition grill has the outer trim and a flush middle trim piece that holds the toyota logo. It is all one piece basically. This is opposed to the inset cross piece through the middle grill like some of the standard models which can easily be cut away.

@customcargrills 3 жыл бұрын

That is the difference between the 1999-2002 models vs. the 1996-1998 models, not a difference in the Limited trim vs. other trim models. To do this mod, you need the 1996-1998 frame. That frame can be used on a 1999-2002 model.

@jacksonbates208 2 жыл бұрын

@@customcargrills Does the 96-98 frame fit in the 2000 model? Having the same issue since my 2000 has the trim outside of the grill frame so i can't just cut it away

@customcargrills 2 жыл бұрын

@@jacksonbates208 Yes, the 96-98 frame can fit a 99-02 model. Ideally it should be plug & play out of the box. The one and only thing that can sometimes be a potential issue is the female part of the mounting clip. Some 99-02 clips aren’t as tall as the 96-98’s. If this is an issue, there’s a few different fixes. Either make the clip taller, swap the clips, or cut off the attachment clips and bolt it on.

@a-pp5839 5 жыл бұрын

Hi.do you have a number. For ordering!!!

@customcargrills 5 жыл бұрын

Hi, these can be ordered here: www.customcargrills.com/Custom-Toyota-4Runner-1996-Grills.asp If you need to call in the order, please use the number listed in the contact section of our website.

@Rivlasa 3 жыл бұрын

How is this a custom grill when you have to modify so much of it? Should be easy install. Lost interest.

@customcargrills 3 жыл бұрын

For those looking to not go through the installation process themselves, we do sell them pre-made here: www.customcargrills.com/proddetail.asp?prod=Toy_4R_96_FR