Toyota 7K Turbo Engine Build Part 1

Рет қаралды 15,915

Жыл бұрын

Toyota 7K Turbo Engine Build Part 1
In this episode we’re back on the Corolla project after a long stretch. The Engine gets cleaned up and all the bottom end gets assembled with juicy upgrades.
7K Engine Manual: vrolla.online/7kmanual
Check all the Turbo corolla series: • Toyota 4KC Turbo Build
Check my other project Sigma videos: • Sigma Build
Please follow the channel and like the video if you want to see more videos like this
/ maivins
Follow in Instagram and Tiktok if you want to see live updates on the build
www.tiktok.com/@vinnierolla?l...
Check out the website vrolla.online/
Support the Channel and buy some merch: vrolla.online/shop/
Here are some of the parts and tools I’ve used in the video:
Maxspeedingrods: vrolla.online/maxpeeding
Dremel: vrolla.online/dremel
Steam cleaner: vrolla.online/steamclean
Here's the camera gear I use to film:
Gopro Hero 8: vrolla.online/gopro8
Gopro Magnet mount: vrolla.online/gomagnetmount
Gopro Suction mount: vrolla.online/goprosuctionmount
Gopro flex mount: vrolla.online/goproflex
Please note when you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission.

Пікірлер: 44

@rogersuperales3594 3 ай бұрын

Thank you very much for sharing your knowledge,,watching from the PHILIPPINES

@vinnierolla 3 ай бұрын

Your welcome. 🙏

@muhammadyusrimuhammadyusri4266 Жыл бұрын

Thank for sharing the manual...

@Bilal-fq3gk Жыл бұрын

Cant wait for part 2 ♥️ amazing work

@vinnierolla Жыл бұрын

Thank you. 😀

@laoshiTv Жыл бұрын

You're Back😂

@vinnierolla Жыл бұрын

Yeah and pumped to get this engine running on the Corolla.

@johnhempstone1411 Жыл бұрын

been a while........been waiting for ages man for this build

@vinnierolla Жыл бұрын

Yeah it’s been slow going but fingers crossed it’s gonna speed up

@poklingworks7533 Жыл бұрын

Happy to see new videos bro, hope i can make make project soon 7k tamaraw fx💪

@eliteblack2239 Жыл бұрын

Waiting for the part 2 😀

@vinnierolla Жыл бұрын

It’s getting closer. Engine pretty much complete. Can’t wait to get it in the car

@tovgan7733 Жыл бұрын

This is good proper build Toyota k engine

@vinnierolla Жыл бұрын

Thanks mate

@Bilal-fq3gk Жыл бұрын

Bro waiting for part 2 plz upload soon ❤

@vinnierolla Жыл бұрын

Thanks bro. I got to finish it first before I upload 😆

@defaultkontact Жыл бұрын

Good to see it moving along bro. What manifold gaskets are you using?

@vinnierolla Жыл бұрын

Standard 7k gaskets

@lamboferruccio Жыл бұрын

Nice been waiting for this, I hope you increased the ring gap for boost

@vinnierolla Жыл бұрын

Nope I’ve made all the gaps standard spec. How much are you meant to increase by?

@lamboferruccio Жыл бұрын

@@vinnierolla there’s many videos on the topic, this one pretty much sums it up with a similar situation as yours, converting an NA engine to turbo charging on a 4AGE. Too little gap will undoubtedly cause the rings to bind inside the cylinder walls causing ring land failure. Too large of course causes excessive blowby but if you follow the formula shown in the video you’ll find a happy medium. A good catch can will help as well. kzfaq.info/get/bejne/nrByn7B-qrmbZ30.html

@lamboferruccio Жыл бұрын

@@vinnierolla I’m also wondering about the balance of your reciprocating assembly, now that you’ve upgraded the rods, being forged H-beams they’re likely heavier which will no doubt cause an imbalance

@vinnierolla Жыл бұрын

@@lamboferruccio good point dude. I guess We’ll find out if it cause’s an issue. I hope it’ll be ok. Will do a bit more research on it. Cheers

@raffuy9745 Жыл бұрын

Hi sir, subscribed to your channel and I hit the bell icon :). I have the same engine a 7K efi. This engine is common in the Philippines.

@vinnierolla Жыл бұрын

Thanks Raff for your supports.

@md.rashedjamanhira557 Жыл бұрын

❤❤

@user-dp1qy2sg6h 8 ай бұрын

Comment trouver la presse à soupape

@steveo5174 Жыл бұрын

Been waiting for this vid for ages bro. Good to see your beard growing over the course of 30 minutes!!! Keep it up mate.

@vinnierolla Жыл бұрын

Lol yeah I taken my time with it 😂 Hopefully the build starts getting up momentum again

@kudabesi3683 Жыл бұрын

👍👍👍

@scottrostern9483 Жыл бұрын

How many Ks where on that engine before you cleaned it up?

@vinnierolla Жыл бұрын

Have no exact figure from the wrecker. But by the condition, my guess is at least 300,000+

@khawajautos Жыл бұрын

Turbo size and witch car turbo req

@vinnierolla Жыл бұрын

T28 turbo and a malpassi fueal regulator

@gulyarkhan4443 Жыл бұрын

Which lsd ratio is best for 7k engine with 2c gearbox?

@vinnierolla Жыл бұрын

Sorry bro I have not sure. Are you using for drag racing or drifting?

@gulyarkhan4443 Жыл бұрын

@@vinnierolla for both

@khawajautos Жыл бұрын

Bro with 7k engine witch menvel gear 5speed req

@vinnierolla Жыл бұрын

I will be using k50 5 speed

@safwantawan7281 Жыл бұрын

What rod size you're using?

@vinnierolla Жыл бұрын

They are 7AFE rods. I don’t know the exact size

@khawajautos Жыл бұрын

Bro I hav also 7k engine can y guaid me for piston and cont rod

@vinnierolla Жыл бұрын

Maxspeeding rods. Just generic pistons

@caldinaezdun6185 Жыл бұрын

У нас по моторам 7к вообще нет никаких видео. Не распространен мотор