I literally had this problem today. My wife called me in a panic stuck in the road in traffic. I instructed her to shut off and put in gear and try to get the car off the roadway. She did and she waited for me to go pick her up. I searched out this issue and got to your video. Did exactly what you instructed and it worked. The valve wasn't all the way opening. Cleaned it with the cleaner (not exactly the same can but one that was a good substitute) worked like a charm. Thank you. Thank you. Got better acceleration and just runs better just from that. Thanks again amigo!!

You genius! We took my mom's car to a mechanic that told us it was going to be the spark plugs and coils and wanted us to spend 1500 to replace the parts. I saw your video and gave it a shot. It's running better than before now so thank you for making this video.

Thank you for this man! My Camry used to want to stall in stop lights and now it idles pretty comfortably without vibration.

THANK YOU! A friend of mine *just* got his Camery back from an (albeit unrelated) expensive mechanic visit and a day later it started to stall when idling. As a result, he's already a couple grand in the hole and this was not what he needed to deal with a day later so I looked into it, found your video, and within 15 minutes his car's running great again!

Great job pm explaining the detachment of every connector. I've been a boiler operator/mechanic, a rocket surgeon, and now I'm on my last gig before I retire doing logistics for a chip maker. I know how to follow instructions. But far too many of these videos leave out or gloss over a critical step. I don't know why- if you doing a How-to, it completeness that matters - not the background music or cool intro. I'm just watching this for like the third or fourth time, right before I pull that assembly so I don't end up with a mystery connector, or spend an extra half hous because I disconnected the wrong side of something, and irmt just struck me how well you covered the one indispensable sequence clearly and succinctly Kudos! Update Wouldn't you know it, just as I got to thr last clamp, the rain ppen up and the wind kicked up. Ducked.back in the house to warm up and dry out.

Thank you for this video . I have a 2011 Camry that was doing this . I changed the MAF and nothing . I followed your steps I. This video and it fixed the car . Thank you again

Man I watched so many stupid videos about messing with the wiring harness and vaccum lines to resolve this issue, this actually solved my cars issue and saved me so much headache and money 🎉

You saved my life I don't know how to thank you enough. God bless you!

Wow this was a super simple procedure and worked great on my 2011 Carolla with 186k miles! The engine seems to run much smoother and idles at a higher RPM (around 1000). Thank you 👍🏻

Thanks for the video. It was helpful for me. That hose clamp was not easy to get to😄. It’s running better now, no stalling.

M Camry 2001 had this issue too. Cost was $115 for a cleaning. Thanks for the video. It helps me understand what the mechanic did.

Thanks for the video man. Saved me tons of time and money. Late night fix so I can get to work tomorrow 🤙🏽

Broooooo you are a lifesaver lol. Swapped my battery didn't know about the idle reset until I googled why my idle sucks after changing my battery and bam got it solved thanks to you in 5min. FJ runs like a champ now

Thank you for this video. My hubby bought ignition coils & spark plugs & it didn’t help the stalling so we’ll try this next.

Thank you, sir! My 2011 Toyota Camry is running and not stalling anymore.

Thank you, easy to follow instructions. Very useful

You explained it perfect. Great video. It worked for me. You saved me a lot of money Thanks a lot.

Nice video! I had to show this to the mechanic!!! Cause they didn’t know what To do and couldn’t know why my car was shaking and shutting off, I just needed to get this cleaned.. thank you!!!

definitely appreciate this video ! everything worked just like you explained!

Great video and explanation

Thanks for the video my car works great now 👍🏽

Great how to. I like it bc you go straight to the point. Is it harmful to the tb if i spray into the flappy thing?

Thank youuuuuuu you helped fix my vehicle ❤❤❤❤❤❤😊😊😊😊😊😊

Good video, if you have no one to help you, just disconnect the battery, and do the rest on your own, no check engine light no codes, no harm done as long as the battery is disconnected, i did that on my, camry, my corolla, with no problems at all, the computer will reset and rpm will get back to normal after a couple of hours of driving.

Good video. Very well explained and worked.

hopefully this all i need to do lol, thanks for the video

Hi 👋🏿 thank you for posting this is an extremely helpful video. Do these cars have a idle air control valve, or just the throttle body?

Great vid Thx

thanks for the vid currently worked for me

Thanks. I had the low rpm issue(down to 500 rmp) especially when turning on the ac. after the cleaning it the low idle is gone and engine is smooth 800- 900 rpm.

Great information brother… I will try this on my Toyota 2014 … my car feels like it wants to shut off wile driving like I can see the RPMS drop . Any good ideas?

Thanks, I think a have a bad pcv that is causing this problem, no smoke but I burn a quart every 2 weeks.

Solved my rough idling issue! Thanks so much!

can you just place a brick or something heavy on the accelerator while doing the entire cleaning process (instead of having a second person)?

thank you, sir

Use a toothbrush instead of a rag. Makes it a lot easier and cleans those hard to get to spots

Hello, nice job, cuestion, a dirty throtle can gives a po172 code?

Do you happen to know what the problem can be when you depress the gas pedal with the key on acc the throttle flap opens really slow? At times It opens instantly then sometimes it opens slow?

Hello! Please help, i performed the throttle body clean as you instructedon my Camry 2008, but now the car jerks when idle, especially when the car is in Drive and i have the brake pedal pressed. I've trid idle relearn procedure but no luck, any suggestions? I notice the RPM gauge is jittery and spikes up slightly. Car drives fine, but that jerking & shaking when idle is not normal, please help.

To clear the check engine light you just plug in an obd2 sensor?

Good looks just got a rav4 it needs that

Hello, thanks for the info. Now I have to find someone to do it. Where are you located?

Hey. Thank you for the video. Today my 2013 Camry SE was running and while it was running I unplugged the AMS and the car shut off. I put it plugged the MAS back and turned the car on it turned on but the engine light turned on. How to reset the engine light off. Any help would be appreciated. Thank you.

Excellent walkthrough, thanks! With the key on ACC, when you press the gas pedal, would that cause the computer to try to add gas as well to match the throttle body position? Can you leave the gas all the way down as long as you want with no issues?

I did clean it on my 2014 scion xb and it didnt work, so I went and bought a used one and its good now. I guess my problem was in the Electric sensor.

@RB the mechanic. I notice a misfire at 1300 rpm with engine cold or hot. It idles good and smooth and drives good. Sometimes intermittently I’ll come to a stop light and the rpm’s will drop from 900 to 600 and returns to 900 as if it was almost going to stall. Any advice?

Would this work for random reving up of rpm when driving? I noticed sometimes just driving a constant speed or sometimes when accelerating, it will rev up rpm then go down to what it normally increase to

Thanks

Hey, how much you think is a fair price to get this service done professionally?

What OBD scan tool do you recommend?

I have 2010 toyota corolla. similar throttle body top right cornar there is a screw hidden in a glue type material. can you please tell me, what is the function of that. and how it help in adjusting a specific parameter? I have observed that changing the position of that screw make throttal pedal to respond differently and effect the drivability . I have an issue of poor idling. throttle body is cleaned. every possibility has been checked but could not fix the issue.

Where can i buy the y tool screwdriver from? Is that the correct name of the tool? Thx

Hi there! My Toyota Camry 2014 has 75,475 miles on it and it barley started doing this. I noticed it doing it after I’ve been driving for a little and then stop at a red light or stop sign. It does it for a quick maybe 2 to 5 seconds where I see the needle want to go down and the car shakes and wants to turn off so I let go of the brake…..then it doesn’t do it anymore. Also, there’s no check engine light or anything. Can this be the problem?

What about v6 2grfe misfire goes away when start and stop but comes on after a load

I cleaned and it’s still not working Could I just change the throttle body sensor on it? or do I have to replace the whole throttle body ?

I just did this today, I am in automatic technical class. Same issue 😂

When the engine is warm and if I let the car sit for 10 minutes and restart the car, the idle drops to 500 rpm for 1-2 seconds, runs rough, and then the idle smooths out? Any idea what could be causing this issue? I cleaned the MAF sensor, throttle body, replaced the plugs, coils, ECT sensor and crankshaft position sensor, and it still does this. There is no CEL, crank time is short and no noticeable drop in gas mileage.

Were those microfiber towels or just the blue shop tissues?

Nice explanation. I have a problem with 2017 camry. It used to vibrate (as if driving on rumbler) when the rpm is around 1500. It runs smooth above and below that rpm. The mechanic diagnosed and replaced the front axle but it only made the situation worse. It occurs more frequently now and intensity of vibration is increased. Do you have any suggestions?

Yo man thanks for the info 💪 worked flawless

My vibe 2.4L gives a sluggish acceleration while on the slope.. could it be this?

I cleaned my Subaru throttle in exactly the same way. Had to disconnect the battery to stabilize the rpms after that.

Show the relearn process and cleaning MAF sensor. I had to do this recently 2011 Camry

Here for lil bro’s Scion - buh yes MY Pontiac Grand Prix was KNOOOWWN for this super small detail 😫

My car idles poorly on drive and reverse gear with my foot on brakes, I feel vibration on my steery and dashboard while idling. It idles at 600rpm to 550rpm is this normal, with so much vibration n gets worse when I turn the ac on still on drive or reverse gear but reduces a bit when I put my car on park gear n vibration disappears when my car is moving n comes back when I come to a stoplight. I think, ama give this a try and see if it solves d issue.

i just did what you do... now the engine idle at 1600rpm, what should i do? i saw your reply about idle re learn. how do i do that? is there a video on that?

For me the car never stalls but my idle goes below 500 and vibrates sometimes when stopping and braking. Any suggestions.

Well, I cleaned the throttle body by following the instructions in this video. Now I ser a check engine light. Any ideas? Car :2013 Toyota camry LE

Hi sir I have 2010 Toyota Camry 2.5 l is jerk when I drive and then it goes.qwqy when I speed? Please I need your help

Good evening sir

I just did that and my cars check engine is on right now, also when i turn the car on the rpm is almost 2000, what would be the reason?

Do these cars have an IAC valve or is it part of the throttle body?

Hey can I use carb and choke cleaner?????

My 2015 camry le idles at 800 rmps when it's on park but when I put on drive or reverse it drops to 500 or 600 rpms and it shakes and the has turned off when I'm at a stop sign or red light.

I have a 2013 Camry se 4 cylinder that sometimes vibrates at idle but only in gear, it goes away in park. Could this be the problem? Thanks

good vid, thanks....btw you have a tank battery in that thing? haha

I have the same camry 2013. It doesn't turn off on the stop light but sometimes it feels like choking when I'm gaining speed and rpms are always low, about 1700-1800 no matter the speed I drive. Do you think it could be the same issue with the throttle body?

How much is a new throttle body ? For this car ?

I did it works perfect ,just getting the check engine light now ,what can I do?

Hello dear I have Toyota Camry when I start engine shake please suggest me

What about hybrid ,same process ?

How do you reset check engine light?

What is the name of the hose that you took off on 7:14 ?

Does this work on 07 Camry 4 cyl ?

You need to do an idle learn for Toyota

Can we clean it by removing totally ?

Why is the idle speed so high after I wash it? how to lower

And remove the hoses very gently as they get hard with heat and can get damage if pulled hardly

Be careful with your fingers. After i do the fix as show in the video i read on reddit that if your finger its in the way and the throttle close it can slide the finger with no problem 😅🙆🏻‍♂️ thanks god i read that after i finish doing the work 🤣🤣

Hey man my car behaves normally when driving I have a 2010 Camry with 2AR-FE but the one thing is it when I turn it on it goes to 2k rpm and one morning it choked like crazy and smelled like gas everywhere but it idled normally afterwards and this all started happening after I accidentally left the cruise control on when I turned off the car. Is it a dirty throttle plate?

Are you in New York? I have this same issue my guy literally 😂

Can I use brake cleaner for this?

Any reason why a 2019 Toyota Yaris would be doing this? At 20,000 miles

Friends 2013 Rav 4 experienced similar issue. I cleaned maf sensor, changed battery. Keeps shutting off. Friend brings to Toyota mechanic and says its the throttle body so he cleans it. Week later, car keeps shutting off again at red light or stop sign. It’s not the throttle body! Brings Rav 4 back to me and I was going to pull spark plugs. Instead I check oil level. I checked the dipstick; there was no oil at all on the dipstick. I’m scratching my head. I ask: where do you get your oil changed at? Friend says Toyota dealership. I ended up having to fill with 3 quarts oil and immediately car idled better and rattle at startup went away. Took for test drive, car drove great and didn’t shut off. Simple but important fix: Folks, Check your oil level regularly especially after an oil change to make sure they put in the right amount. Go to a trustworthy place that will take care of your car properly if you can’t or don’t work on your own vehicle. I’m thinking either incompetent mechanic or intentional sabotage! 3 quarts short? Hmm. Makes me wonder! This mechanic is good though, I like the way he walks you through the repair. Good video and explanations paired nicely!

Man I having the exact same issue with my 2014 Camry and I changed the trotte body and it’s till turning off with no codes

Keeping foot on gas pedal for this won't let a bunch of gas drop somewhere will it?

I have toyota camry 2004 (manual) When i run the car without airconditon the rpm is not drop but when i turn on the Aircondition car feel little bit shake then car when running about avobe 30+ speed the rpm is good but when car get reduced speed car shaking and when gear in neutral engine get stop plz tell me about the problem🙏🙏

Hi, may I have auto body shop address? I have same issue.

Hi, thanks for the Video, I guess d engine wasn't running

Followed directions now the idle is 1600 (2k with AC on) Suggestions?