Great job. I appreciate you taking the time to show how to do this. Thanks. 👍🏻.

Finally a tutorial on the newer years. I been searching since I got my car

You're definitely a good mechanic and are a big help for many people!

Nice work. A little tip to prevent hard start due to disconnect of the fuel line is to turn it to the ON position and let it sit for a few seconds before starting it. This will give time for the fuel to travel into the line.

Thank you for the advice specially on putting the oil for the o rings, I was struggling to get them back in on the first attempt because I did not lubricate them

Thank you so much for the information, I will do it for my camry 2015, , good bless you. From San Diego CA.

@ 1:40 Ali is making seem so easy, I used a 5/16 fuel disconnecting tool and I am having one of the toughest time. I learned that you would have to depressurize the EFI or fuel pump so I removed the 20 amp yellow fuse under the hood ( EFI no. 2) the engine died out, let the engine cool down then I removed the battery terminals, and STILL, I could not remove the fuel line. Ali or can someone who is reading this give me some tips? What am I doing wrong here?

Any particular carb cleaner to clean up the injectors? You explained this wonderfully. If I didn't have a v6 I'd give it a try. Great video lesson. Thanks 😊 🙏!!

Great job ! Very carefully explained. Is there a way that I can have this job done by you please ?

Very goofd job ! Thank you for this important tutorial !

Great video!!! You make it look so easy! 👍

Thank you, Larry

ماشاء الله اخي مبروك شغل ممتاذ

I've heard it's also good to replace the larger O-rings when the fuel injectors are being serviced.

you are professional man,

Ali, what size hose clamp do I need to get for the fuel hose adapter and what kind of glue did you use and what size metal washer? Also, where can I find the switch and positive and negative alligator wires? Thank you Ali

Nice video! What do you think about gas additive for cleaning injectors.

I really love how easy you make this look. As someone who is far from even an amateur mechanic, would you suggest I try this. I have watched it a few times and besides acquiring the tools (I still don’t get that 9v battery switch or how I would get/make that lol) and I’m tempted to try. I have done some basic maintenance on my car with zero starting knowledge (spark plugs, filters, changed the serpentine belt, all from KZfaq btw). But this definitely looks way more intense. Thanks for anyone’s response.

Thank you sir, great video and explanation

thank you for your help

great tutorial bro keep up

Is the soft wire brush that you use to clean the injectors with made of metal or as a tooth brush?

What was it you did when you put new filters in the fuel injectors, also what was the method for removal of the old filter?

How did u de-pressurized the fuel rail/system

Bro what is the size of hose pipe piece?

Hi Ali love your videos, could you do more videos on toyota prius as this is a very popular car around the world. thanks

Hello Ali. Is that your name? My name is Jimmy and we commented to each other before. I want to do the same thing to my 2013 Scion TC and I understand I probably cannot just pull one or both fuses for the fuel injection because the injectors will not activate. We have the same engine setup. I watched your other video where you disconnected the fuel pump under the back seat, but would like to avoid that method. I want to do it like in this video here. When I take off the fuel rail with the injectors still on it, can I just keep the injectors on it and do exactly what you did by running the hose connected to the opening in the fuel feed line with carb cleaner? And I will power each injector individually with a small 12 volt battery while spraying the carb cleaner through the main metal fuel line. Is that possible or is disassembly much easier? I did your carb cleaner method through the feed line in my dad's 1998 Cadillac Eldorado since there was only 1 fuse for the fuel pump with the device you made...I copied it perfectly...And it worked like a charm! Amazing results just running his Caddy on the carb cleaner...I doubled the average MPGs because the injectors were so clogged they were stuck open constantly even when the car was shut off they were constantly dripping fuel into the oil. And the exhaust doesn't smell like shit from running too rich as it did before. It runs like it's brand new again! Night and day difference...18-20 average MPGs to 36 average MPGs!!! That's double the fuel mileage! Much Appreciation and Respect to you my friend!!!!! Please get back to me when you get a chance about my method or simply doing it just like in the video. I found the O-Rings on Amazon for under $10 for four of them... They are made by Mahle and they have 100 filters for $22 made by Menghe. That's a lot of extra filters but it's worth the price. Thank You Once Again, Your New Friend Jimmy :)

Thank you!

Did the car have symptoms like cranking longer than usually? My camry seems to take longer to crank than it previously has.

Hi , is there removable filters in injectors of camry 2azfe 2006 ?

Hi 2013 toyota camry hybrid fuel injector replacement similar?

Thanks brother

Thank you very much for the information, I will do it to the. Chevrolet Aveo thank you very much and many blessings for you and your family 🙏👌🍀💯🙏👌🍀💯

Thanks man, well demonstrated and clear explained video! I didn't expect to design and 3d printing yourself that tool 😀👌🌹 that was a different level of professionalism! What 3D printer do you use? Are the new o-rings and filters available with any Toyota parts dealer?

Thanks for the video it’s really helpful. Where can I buy hose adapter and fuel alligator wire.

Very good Ali 👍 Nice work

Love the video! I have a 2016 Camry hybrid LE. There is a different component above the fuel rod that’s blocking the fuel rod. I couldn’t figure out how to remove the injectors.

What oil do u use to lube the o rings

What an outstanding video ! I assume I can use this on my 2015 RAV4 ? Where did you get your new O rings and injector filters ? Local Toyota shop ? Also, what did you do to get the filters back in the injectors ? You used pliers, but it went by to fast... Any particular injector cleaner you prefer ?

My 2014 RAV4 struggles to turn on when the gas is in 1/4 of gas can it be the fuel injector or the fuel pump?? Or Starter??? No check engine light on.

Good job. My only 2 suggestions are to replace all o rings and you don’t need to use a half can of carb cleaner when cleaning the injector.

i used the same process on my 2013 camry but mine didn’t come with those spacers, should i be worried?

Nice. Thank you. Is it 2AR - FE Engine? Can you make one complete video on 3D printing basics?

Alimesh. Is it relatively easy to replace the fuel injections without taking off the fuel rail. I just want to replace all four of them. Thanks for your help. Lc

How did u make the rubber hose tool for the injectors cleaning

Where Can We Purchase The Filters And O Rings?

I have 2011 camry the im using the same disconnect fuel line tool and size your using but its not working

Thanks for the Video. What size rubber hose did you use?

Is this better than just pouring fuel injection cleaner in the gas thank. Alot ppl say just put fuel injection cleaner brand chevrons tech fuel injection cleaner in the gas tank.

Hi from where I can get the injector nozzle filter because i asked the dealer and auto zone they says we don't have separate filters

Please advise me where from I can get new filters and orings

Unfortunately, my 2015 Camry is an SE Hybrid which it has a lot more stuff built on top of the fuel injector bar. Almost impossible to remove, even with that tool that I also 3D printed. The socket for the fuel injection bar came out easy but the rest was literally impossible to remove.

Hey is there any way to tighten my engine. For some reasons when I crank the engine while hood is open the engine jerks up and down. Not sure if that's normal

Where do you buy the injector filters? I can't find them anywhere.

Is there a cheaper kit for filters & orings?

Was the car running bad or anything noticeable before doing this?

Not sure but it sounded like he said use Carb cleaner, aka, Carburetor cleaner... Is this correct ???

How do you do ac freez on

How many miles the car has ?

Fucken badass thanks for a good video

perfect tutorial. check us out for microfilters & orings

Wouldn't changing the fuel filter first before cleaning injectors be more profitable

thanks in not enough

Where is the fuel filter on a 2017 Camry?

It would just be much easier and better to just replace the injectors

Dude, it is cheaper and better to buy new once in order to avoid doing it wrong, or losing one of components.

Instead of making the fuel filter under the vehicle. Let put it in a spot that takes a lot of work to get to and may brake 😂