Thanks a lot for the compliment and for watching! Great to see a fellow DIYer! Good choice you've made. You could further cement your decision by reviewing MP808TS' coverage for the cars you typically work on. Just to be sure it gets all the main things you need. Function checker here: www.autel.com/vehicle-coverage/coverage2 From personal experience, I would just cross Foxwell off the list. In all the MP808TS has been a very good decision for me and money well spent. All the best!

@@DIYAutoworksNG I undestand this is almost the same as Autel MaxiAP200

Thanks for the compliment.

Good to hear it worked.

Thanks a lot Rob! Do you mean the key fob, right? I'll plan this for a future video. Thanks again.

Thanks!

You're welcome!

You're welcome!

Any time!

Yes. There some cars where this can be done without a scanner. My 2003 Honda Accord can also be programmed without a scanner using an existing key.

Gracias!

To further confirm if it's the master, once you put it in the ignition, the security light should stop blinking immediately. If its a valet, it will blink a bit after insertion before it goes off. You'll need a Master either way if your going to use just the MK808Z

You're welcome.

Thanks!

No. The MP808TS does not come with OBDI adaptors.

Depends on what you want to cover in programming, the car brands to cover, and your budget.

I included links in the description, just in case that offers you a good deal

Supported, per Autel tool coverage page. It's the MP808TS. License is active, but not required for this key programming.

Thanks!

I am not 100% sure, but considering that Toyota started using chip keys from the 2005 Corolla, the Altis may not have chips in the key.

Hello. I haven't checked with the tool yet, but on Autel's coverage page it shows that the MP808TS supports Key Matching. It doesn't clearly say if it would read the pin code directly. I would check with the tool in a bit and revert.

@@DIYAutoworksNG Thanks! I asked from a seller from eBay, and he said that it is not possible to retrieve immo pin code with MP808ts.. SO, maybe i just need to buy one of these and try it and find out if he was wrong or not :D

Hey Syntappi, Some goodnews! I checked the tool and went into - Service menu - Immobilizer - Immobilizer.. It greeted me with just 2 options: "Read password" and "Key matching". They were several options for reading the password under the first option. I then visited Key Matching tab and it said "the function is applicable to 2nd, 3rd and 3.5 generation immobilizer key matching." It further stated that to conclude key matching you should first obtain the security login code by immobilizer code reading in special functions. I guess its left for you to find out what immobilizer your cars have. If within those listed above, it looks like it would read the pins... If you do go ahead with buying, do let me know how it goes. Best of luck!

@@DIYAutoworksNG Thanks again! Yeah, i think that my car has 3rd gen immo in it, so it should work just fine. I looked Autel’s website and found a page that shows what functions every model has. And it showed too that the mp808ts should support key password reading! I’ll buy one off eBay, and we’ll see if it really works or not ;) Of course i won’t buy it just for that stupid immo-thing. I run an small car repair shop, and you never can have too many scan tools 😀

Lol at having too many scan tools. Just be sure to get it from an authorized dealer since you are getting from eBay.

You're welcome

Depends on the car. For this one, no.

For this Toyota, using this Autel tool, no.

@@DIYAutoworksNG what about for a first gen Scion tC?

Not sure.

@@DIYAutoworksNG Ok, thanks :)

🙏🏼

You're welcome! 👍🏼 👍🏼 👍🏼

Yes, but not all cars. Specifically I mean it will be able to add keys to some brands. It won't clone keys, if that's what you mean.

Thanks for watching

Chipped keys introduced from 2005. You are correct, the 2004 doesn't use transponder keys.

I seriously doubt.

Thanks, mate. I don't know off the top of my head, but I'll check and revert.

Affirmative. This scanner will work on Fords

@@DIYAutoworksNG to program a key?

So I checked the function viewer menu and these are the special functions supported: 1. Passive anti-theft system (PATS) functions 2. Remote keyless entry 3. Factory keyless entry code It doesn't specifically list key registration. It states it can do key fob programming, erase etc. I can post a screenshot on the community section if you want see what the Ford immobilizer service menu looks like on the MP808TS. Just let me know.

@@DIYAutoworksNG yes please I’d appreciate that!

@@Hugolopez732 Here you go! View here: kzfaq.infocommunity

You're welcome

Yes. Both keys now work. I just added the new to work with the existing.

The locksmith must have done an "all keys lost" procedure. This is the recommended procedure in the event of loss of keys. It deletes all key records in the immobilizer memory, and only adds the newly programmed key. You can take the old key back to the locksmith to add it back. Cheers.

For Honda I am sure, yes. For Toyota, not sure. You can check Autel coverage tool here. autel.com/vehicle-coverage/coverage2 I'll try to check when next I have the tool in a Toyota.

You can add a valet key using this device, but if its just a valet key that you have, Toyota demands that only master keys be used to add others.

@@DIYAutoworksNG yeah i didnt get one when I bought my car so I wanted to buy a new key with buttons

Not sure of the mileage edit, but I'm 100% sure that as at today, the only way to program a 2017 Mercedes is at the dealer! The 2014's and below are programmable but with advanced key programmers

@@DIYAutoworksNG you mean program the key is only possible at the dealership? I’ve seen odometer option gives a readout of the mileage of every module where it is saved…you don’t know if I can also adjust it? The new cluster I bought has only 160km on it 🙈

Yes. Key programming for newer years only at the dealership for now. Not sure of odometer rollback support.

@@DIYAutoworksNG okay, thank you! will call Autel tomorrow and ask them!

Yes. But not all cars.

🙏🏼

Yea 😀

It's very important to buy from an authorised dealer. Also good to inform the dealer if purchasing from another region so that region lock issues are cleared before hand.

Thanks bro

Sorry to disturb u bro but mine was bought in USA from Walmart shd I register the account with USA or Ghana or the person who bought it shd call autel n inform them before hand

I think it would be good for the person who bought it to call Autel US and mention that the intended use location is Ghana. Then let them advise. Do let me kkow how it goes...

@@DIYAutoworksNG My Brother called and he was told that it will be blocked once the ip shows it has left the region and for it to be unlocked he will be required to pay 20% of the actual value of the device but i would like to know if you selected nigeria in the account you registered with

Same process.

You buy a master key. For this car, an unprogrammed mater key can be used.

Pricing fluctuates, but I have links in the video description.

Not this tool. Mercedes needs advanced key programmers.

Hi. The link in the description should have the most updated price.

I have web links in the description, but it can also be bought on other website or in shops that sell car diagnostic equipment (depending on where you are based).

Is the security light blinking even with the key in the ignition?

I think I got the key locally from a locksmiths shop, however, I've included some links in the description in case you want to have a look

Hello

Amazon, Ebay, dealer...

@@DIYAutoworksNG thanks

It depends on the model. The particular one around $900

Price varies, I have links in the description which should have the current price as at today.

No avail

If its not available, it's likely because you are vising the link from a country that the seller does not want to ship to. On the top left corner, change your delivery address to any zip code in the US to see the pricing.