Рет қаралды 65,206
This is a tutorial to replace the original 1998 - 2002 Toyota Corolla factory radio with an aftermarket radio. Remember to disconnect the vehicle battery prior to cutting any wires as not doing so can cause a lot of annoying issues. The wires are all a small gauge size, so the small red butt connectors are suitable and a simple wire stripper / crimper is fine for the task. A magnetic Philips screw driver is best for removing the radio screws that mount it to the dash as the screws can get lost.
Wire use / Factory wire colors / Typical aftermarket colors:
Battery / Blue with yellow stripe / Yellow
Ignition acc. / Gray / Red
Ground / Brown / Black
Amplifier / Pink with Blue stripe / Blue with white stripe
Dimmer / Green / Orange with white stripe
Speaker front right (+) / Light green / Gray
Speaker front right (-) / Blue / Gray with black stripe
Speaker front left (+) / Pink / White
Speaker front left (-) / Purple / White with black stripe
Speaker rear right (+) / Red / Purple
Speaker rear right (-) / White / Purple with black stripe
Speaker rear left (+) / Black / Green
Speaker rear left (-) / Yellow / Green with black stripe
Sorry for the darkness of the video, I was running out of daylight and really wanted to get this done!