Toyota GR Yaris Powerflex Engine Mount Bush Upgrades - (Lower torque, gearbox & upper engine mounts)

Рет қаралды 9,215

Күн бұрын

We're back with another GR Yaris installation video and this time round we've been joined by Matt to talk bushes with us. We have a selection of Powerflex's 'road' & 'black' series bushes for the lower torque, gearbox and upper engine mounts. Matt & Dave discuss the pro's and con's of each type of bush and then delve into depth on how to install the 'road series' bushes to a GR Yaris!
Be sure to subscribe so you don't miss our future content! - kzfaq.info?s...
Powerflex Gearbox Mount - www.tegiwaimports.com/powerfl...
Powerflex Lower Torque Mount Insert - www.tegiwaimports.com/powerfl...
Powerflex Upper Engine Mount Insert - www.tegiwaimports.com/powerfl...
Presenters:
Matt Howard - / matt.howard87
Dave Varley - / dave_varley
Videographer:
Spencer Abell - / spencerabell
Timecode:
Introduction - 00:00
Unboxing the Powerflex bushes - 5:01
Removing the OEM lower torque mount - 7:53
Installing the Powerflex lower torque bush - 10:11
Removing the OEM drivers side engine mount - 12:25
Installing the Powerflex engine mount bush - 15:25
Removing the OEM gearbox mount - 17:40
Installing the Powerflex gearbox mount bush - 20:47
Follow us on social media:
Facebook: / tegiwa
Instagram: / tegiwa
Order Online:
Tegiwa Imports: www.tegiwaimports.com
Tegiwa Euro: www.tegiwaeuro.com
#tegiwa #gryaris #yaris #powerflex #enginemount #mounts #toyota #installation #automotive #unboxing #howto #gazooracing ‪@PowerflexSuspensionBushes‬

Пікірлер: 27

@tegiwa Жыл бұрын

Want to upgrade your GR Yaris engine mount bushes? Shop now: www.tegiwaimports.com/search/?q=power+flex+gr+yaris&cat=

@MLN1337 Жыл бұрын

i would recommend use loctide for the screw which holds up to the gearbox mount. I put mine off the car today due to massive vibration and noise. Screw got loose.

@anthonywharmby7500 Жыл бұрын

@@MLN1337 This. Mine was loose from the factory.

@kentowers2802 Жыл бұрын

Fitted these a while back and made a massive difference to gear shift and throttle response and barely any increase in vibration, only on a really cold day in initial start up otherwise not noticeable

@darrenprior6339 Жыл бұрын

Did you use the road or race mounts? Cheers

@kentowers2802 Жыл бұрын

@@darrenprior6339 the yellow road version they’re a great mod

@michaelanderson2689 Жыл бұрын

Adding torque setting might help others.😜

@kentowers2802 Жыл бұрын

The 2 difficult bolts on the gearbox mount are easier to access from under the car 👍

@PowerflexSuspensionBushes Жыл бұрын

Great video guys, thank you for featuring our products for the GR Yaris.

@markos8400 Жыл бұрын

I have DNA torque mount (80), gearbox yellow(70) and upper engine black (95; some report yellow popping out cos zip tie breaks). There is some NVH but has massively improved the shifting and response. Recommend! 8:56 your is also broken :) You're not supposed to see through it :)

@DeFausti 11 ай бұрын

ITS NOT BROKEN, it's perfectly normal for the bottom rubber to not be in contact. Stop regurgitating what you've read on forums

@wubziz4769 6 ай бұрын

Hey, the black one does not have the problem of "maybe" popping out like the yellow one has? How could that be fixed? With a metal zip tie perhaps?

@markos8400 6 ай бұрын

@@wubziz4769 Yes, that's what I've read before buying my black one. I think it can be fixed by using a metal zip tie on yellow,

@wiytboi 7 ай бұрын

Do these also fit the gr corolla or only for the yaris?

@darrenprior6339 Жыл бұрын

This is great information. Just wondering, if the mounts are stiffened, is there a chance that additional vibration can damage or fatigue any metal mounting points over time? Cheers

@EVO_Engineering Жыл бұрын

Thanks for the video! Still thinking about yellow or black for daily driving. Leaning towards black, some NVH would be ok and would possibly add some appropriate character to the car?

@tegiwa Жыл бұрын

Hi, If you also do track days then the black series is defiantly the one for you.

@darrenprior6339 Жыл бұрын

I fitted the black engine and tranny mounts and the vibration on idle is awful. The trade-off is the gear change is a lot smoother, as is throttle response but I'm thinking of converting to the yellow bits as I worry the awful idle is going to make something fall off the car

@avatar94100 Жыл бұрын

@@darrenprior6339 wow is black that bad, have you made the switch to yellow?

@darrenprior6339 Жыл бұрын

@@avatar94100 TBH black was awful. Be ok if the car was purely for track and not road but it was dreadful. I was also worried that the vibration would eventually rattle something off or break something. I have since switched to yellow and it's a lot better.

@avatar94100 Жыл бұрын

@@darrenprior6339 How is changing gears with yellow bushings compared to stock. I do have a few problems with unsmoth gear changes, especially the first three.

@Professional_internet 6 ай бұрын

Does anyone know where I can look up the required torque for all of the bolts?

@mengx94 4 ай бұрын

2 ugga duggas

@yaoscaescobar365 5 ай бұрын

I bought powerflex engine mount and it made my car extremely uncomfortable because of the strong vibration in the hole car. Don’t buy power flex now they don’t want to give me my money back

@patricepalsky6579 4 ай бұрын

Black or yellow ?

@brianmoreno3222 4 ай бұрын

Which mounts did you get?

@mengx94 4 ай бұрын

Yellow pitch insert for my gr corolla made no difference in vibration unlike cusco.. better shifts though.