[[[[ YT videos like this support the reason I'll never ever take my car to the Stealership, Quick Lube, or mechanic EVER again. They're all thieves. ]]]] - After a throttle body & MAF sensor cleaning (and new battery), the idle was sitting at 1400. Did every step exactly as demonstrated and it's now at 900, close enough to 800 where it belongs, but I'll take it! Thanks good guy for putting this out!!!

I have had this video saved for a few years and today is the fourth time I've used it for my '07 Yaris. Thank you!

Straight to the point. No fluff. Impressive. Thanks a bunch

2002 sienna: i endured rough idle, till i cleaned the throttle body. ran better, but still rough idle. using this procedure set the idle almost instantly. i waited the 7 minutes, cycling the air conditioning also. much better. thank you.

Worked wonders for me! I’ve got a 2006 and it’s hanging on in there. Got some repairs to do, but thankfully I know what it is.

Thank you! I replaced the battery in my Corolla a couple years ago and since then it had a surging idle. Replaced every gasket, cleaned every sensor, cleaned throttle body and nothing helped. After this procedure I have a stable idle!! Thank you

After I removed the negative side of the battery, the car start to shaking while switching on, folowing this steps It solved the problem. Thank you so much 🙏

once the car starts your suppose to let engine run 10-15 mins tops so ecu can set the ignition coils,fuel injectors, throttle body and air flow ratio into and out of the engine after doing a tune up on my friend toyota avalon once the car started the vehicle sounded horrible after letting the engine run for 10-12mins the engine regain it strength.

Wow, this really worked. Thanks a lot. I’m glad somebody is posting videos on these little tricks.

Thanks for making this video! I love it when good people do good things in this world! Thumbs up to you Sir!👍

I love the way you speak! As if words are difficult to understand. Go head. Do more.

Great video. And "THANK YOU SO MUCH!" I have a 2012 Yaris. "AND THIS IS NOT MY 1ST NEW BATTERY!" Never had to do a reset before. Didn't even know about it. Old battery out, new battery in. No problems ever. Someone in the auto part store said: "check KZfaq". I did, and I'm on the way home now.😊😊😊 Once again, THANK YOU SO MUCH! 👍👍👍👍👍👍👍👍👍👍

After i replaced the idle control valve and cleaned the trottle body, my car had a high idle, and it would turn off by itself. And if i tuen on the Ac, the whole car would vibrate, then turn off. Thanks, this worked for a 2003 Mitsubishi Outlander..

Saved me money especially from these mechanics guessing the problem

Worked perfect for me today in 2021 on my 2001 toyota Tundra. Thank you so much!

Thanx bro for this hardy info. My Vitz just worked perfectly. God bless you for caring to help those in distress.🙏

Mine wouldn't stay cranked kept cutting off on me while driving it after I replaced the battery.. I used these steps and it worked ty so much

My is a 2008 tundra 5.7……. And I did exactly what you said and work perfectly thanks so much.

This video saved me $ and a half hour drive to my dealer. Thank you for posting this! 07 4Runnner BTW.

Swap my battery heaps of time didn't know that idea is helpful for me because I'm toyota fan thanks so much for good video

Hell yea this helped me so much didn’t believe it until I hit that 5 minute mark and she just re adjusted as soon as I put her in park she would always jump around with the ac on now she isn’t budging , thank you so much

Awesome , just did it on my Corolla s 2013 nd it worked foreals ! Way better idle . Wow impressive 🎉 Thanks for that video

This worked. Amazing. Would have had to have taken it in and God knows how much they would have charged. Thank you!

I tried it with my toyota Camry 2008 and it worked thanks

It took awhile but it did finally work.

Thank you men, i did these to Camry 2002 it work correctly without any problem. Good job guys

Thanks so much! I followed your procedure after watching it 2x. Worked great!

Works perfectly after swapping a airbag and a wheel! Thanks for the tips

Omg thank you. Thought i completely fucked something up. I was getting no acceleration and misfire codes. Did this and cleared the codes. Car runs fine now

Great video. Thank you for showing the proper way to rest the idle!!!

Thanks so much, worked. Saved video. Happens every time I remove my battery for any reason on my 2012 Toyota Tacoma. Happened first time after I replaced spark plugs and I swore I somehow destroyed my car being a novice DIYer but now I know it’s just the ide computer settings being reset to new car settings with a clean throttle body. Y’all can also clean throttle body to fix this so settings are like if your car was new.

Thank you so much :) this is very helpful Somehow the power cable (red +) on my my battery was so loose that it came off I only noticed it when I went to jump start it. My Corolla started after I secured the cable but it was idling very rough. I basically did a whole tune up and at was still shaky. I finally tried this reset and it works! I probably saved a great deal of money

Thank you very much for this information. I just applied it to my Toyota Corolla 2006 and it worked well.

Video was an answer to prayer. Bravo sir!

I knew there was good people in this world like you thanks man

Thanks for the video man it's totally helped and probably save me a bunch of money at the mechanics. You're awesome!

I hads my starter replaced AND the vehicle had a very low rough idle, the mechanic was confused, When I told him the comptuter needs to re program. I'll never go there, as per your video it works fine.

You are awesome. Having this issue since last year. Thanks a lot. Keep up the good work.

Another check mark for you here brother . Worked exactly how I needed it to. Thank you!

I just tried it and it worked... thank you... you did justice to these cars 😃👍💯

Thanks, you saved me $$$ with this video.

Thank you so much. I was so worried I had a major issue but thanks to your video I am all good again.

Bro wow, i own 4 corollas and never knew this… saved me today

This also worked for my Honda 2000 Accord thank you

GREAT DIY VIDEO ,APPRECIATE MAKING IT SIMPLE AND EASY TO UNDERSTAND,,

hello thank you for making this video on this relearning the computer. Is engaging the parking brake for safety because the car is idling or is it part of the procedure of the steps?

It worked on my 2010 Corolla. Thank very much.

Great Vid. Exactly what you need. No BS fluff.

I've done it and it worked, on a toyota fortuner v6 petrol

I just replaced my original battery in my 2015 Camry today. All i did was cycle the key on twice and started it up. Ice cold engine. No rough idle. No problems whatsoever.

Worked on my 2001 Solara V6!

so i recently disconnected my mom's battery on her 2013 toyota corolla after that change, we have noticed that her rpm chugs down then goes back up again, I was thinking that it might be the throttle body have the issue but I will check this out later and see if it works.

Thanks great information, simple to the point. 👍👍

Thank You it worked just like you said

Great advise… thanks

Worked for my 2006 4runner thanks very much !!!

Does it work also when idle is high? I just cleaned the IAC and MAF sensor, replaced air filter and cleaned the air filter's box and duct. Idle was close to 1,400 rpm now dropped to 1000 but i think it should be lower.

How about on a manual transmission?

Really helpful, thanks bro

thats awesome! worked for a 1998 Corolla. Thanks a bunch

What about for manual transmission models? Obviously you can't put it into 'park' so what do you do instead?

Perfect - thank you for posting this!

man, I'm sitting here looking up fuel injectors and or sensors and mass airflow sensors after changing spark plugs and coils and a battery terminal...good grief they add up quick! I hope this is all it is!!

I love you man. ❤ fixed my 98 rolla.

Even works on my 1994 AE100

Lifesaver, thanks pal

It worked for me. Thanks!

I have a Toyota Auris 2010, manual gear box, so putting the car in drive mode with foot on brake means putting in gear One with clutch down and foot on the brake?

Thank you very much, it worked like a charm.

Can leaving your brake light on that long cause the bulbs to overheat.

Omgosh, THANK YOU SO VERY MUCH ! ! !

I like that steering wheel what kind of Toyota is that?

what about the procedure for manual transmittion toyota corolla 2010 model?

Thank you so much for this video will it work for one with push button?

I had a question...if you have a manual transmission.....but just on neutral just right now the idle is starting to go up after I changed the battery...it's holding at 850...will let it run a while and see if it stays

Thank you for this video.

Wow! Works like a charm.

What if you have a manual trans.? My Corolla will not idle. I have to keep pushing on the gas to keep it running so I have to get it warmed up to do this? YIKES!

Thanks! Worked perfectly!

I have a 2017 Highlander, with stop / start button - looking to reset my Battery. Any solution?

I thought you’re supposed to take foot off brake during the process because the emergency brake is on?

the tutorial helped me a lot thank you

Thank you soo much, it worked like a charm!!!!!!!!!!

Thanks. This was very helpful.

I tried this on my 2011 Toyota Camry. I had to change the battery. I tried. Doing this on my car but it idles to low then shuts off. Before I put it on drive. Need help.

What if the hand brake of the vehicle is not working?

Tried it twice and it didn’t work for me. However just driving with the bad idle to go get a coffee made it go away on its own. 2007 Corolla 1ZZFE 1.8L L4

What is the correct idling for fielder corolla hybrid 2014? Mine is about 1500, feels so high, is it normal?

Tanks to you help my allot too fix my problem

Great video it works, thanks

Good question I have remove my battery from placing an a new starter for my toyota 2002. After my RPM went all the way pass 8 an I can't seem to get it back to 0 or 1 when starting the car evening driving.

what if in my manual transmition,?no drive

Will give it a go! Thanks

Awesome thank-you worked great

Thanks dude. Worked perfectly on push start toyota as well

What if depressimg the brake drops the rpm 100 and it starts vobrating. Only when brake depressed. What the hay, been an issue sonce i got it and cant figure it out. Brake booster, air in the line? People are just guessing it seems

Thx Andy, it worked right away.

Cant keep it running long enough to run teat, but it looks like alot of people are having successful so ill keep trying

If you use a an ECM memory saver do you still need to do this. I know cars run like crap when ECM is trying to relearn.

Why the ebrake though? I cant use that, it gets stuck. I can just hold it on the break normaly too, without the ebrake?