U Tubers take note ! ....this is how a how to make a clear concise how to video ie no music no BS just the facts great work mate !

Having just bought a 2010 Kluger I've done an oil change. I watched this video up to taking out the filter. Missed the bit about the internal seal. I'll know next time. Great instruction!

Thanx bruv, a job I'll never have to pay for again, I didnt realise how easy it was to do yourself, well with an instructional vid like this how could anyone go wrong. Cheers Bro👌

Hundreds of likes, very detailed step by step, quality video and clear sound. Easy to understand all the technical tips! Keep the good work and the good videos up

What a legend!! I’ve got a kluger and def doing this myself! Following all your videos.

Usually when the drainbolt on the filter doesn't come off by itself, it's because it and/or the oil filter housing cap were not torqued correctly at the previous oil change. This is your fault if you are using a ⅜ extension in the drainbolt to tighten both the oil filter cap and drainbolt at the same time. Use a good oil filter cap wrench like the Motivx MX2320 to tighten the oil filter cap and then use the ⅜ extension to tighten the drainbolt making it half as tight as the oil filter cap. Oil filter housing cap = 25 N•m Oil filter housing drainbolt = 12.5 N•m (½ as much as the oil filter housing cap) Put the covers back on after starting the engine and checking for leaks. And really... Anything below the low mark is excessively low, anything above the high mark is excessively high. When do you check the cabin air filter? All in all, I gave you a thumbs up. Great quality video. Great attitude. Quite thorough and sufficient for the average DIYer.

Simple, clear and concise. A very well done video. Great work mate. I am an aircraft engineer with auto mechanic background too as a hobbyist so I appreciate good quality stuff like this! :-)

Very good detailed video. Thanks for making this video. I wish there were more kluger servicing videos

Awesome video! Thanks for the detailed description and walk through.

Many thanks i really appreciate you taking the time to make this video

Thank you that was very helpful, those oil filters are different, the old style was much easier

I watch this video it's very good service and help for everyone thank you to share your talent GB

Great Video easy to follow with lots of helful tips. Many thanks mate !!!

Thank you for your time. I've learnt a lot from your video, very helpful.

that's a very nice and clear video, well done mate.

Thank you for putting this together. Going to have a go at this on my 2013 Kluger

Great tip on rotating the wheels front to back and avoiding the wifes gutter rash. I went up a size in tire to 265/50 and she can't get at the wheels now.

Fantastic video mate - really helpful and informative, explained everything I need to know.

Very helpful to change engine oil myself .

Great vid mate, easy to follow.

Thanks for an awesome vid. Really helpful after taking it to Toyota to get it done last time. Just wondering if it was worth getting my VVTi rattle looked at?(It only happens at startup)

Awesome video and super envious of how clean that engine bay is! Any tips for getting it as clean as that? Mines been neglected since it’s been built I would say 😂

very good info , thank you ,

Very good to service the car. Are you from Australia. I'm from Sydney. Thanks

Very good. Thanks.

Excellent thanks

hi mate, this is great . have you got any other video on these klugers like transmission flush or drain/fill , coolant/brake fluid etc...

Once the oil and filter have been changed, could you demonstrate how to reset the maintenance interval until the next oil change is due...?

Great video, just brought a Kluger, thanks for the tips, any plans for a trans oil change vid ? Love too see. Cheers.

Hi Mate, do you know much about the gearbox / front diff whine these Klugers sometimes have? Mine is most prevalent around 70=80kms and quite loud, pretty annoying and from what I've found quite common.

Brilliant vid. 👍

good work Awesome video Many thanks

very nice video

Didn't know Justin Langer's got a workshop 😂

Great Video. Well explained. Any thoughts on doing the next service as well, transfer oil, rear diff etc

After serviced how to set dashboard odometer setting. My dashboard showing me setting “hold and press “what have to do please explain me thanks kluger 2017 Austrailia

good vid!

What oil weights does your manual specify you can run?

cant wait for the civic version!

Ultra HYPER-SONIC nuclear MAGA 2024

Regarding the jack stand placement, my jack-stands don’t have a grove (u-shape) in them like yours. Makes it hard to place them under the rails without possibly causing damage. Do you have another recommended spot? Great video. Thanks

How much oil did you add all together?

Thanks for the video mate. Where are you located? I might as well bring my car to you for servicing :) Considering Kluger takes 6.1lt engine oil. It is a pain to find 7lt engine oil bottles when someone like me only look to do 1 service a year. Nearly only 5000kms a years . Bases on your feedback I should be okay with 6lt bottle.

must be a 2010 hybrid if it's got a timing belt?

I have Toyota kluger too. It got knock sound on steering wheel while slow turning ! Wht could be the reason mate!!