Toyota Tacoma rear wheel bearing replacement

Рет қаралды 16,387

Күн бұрын

Replacing a rear wheel bearing on a 17 Toyota Tacoma by a Toyota trained technician
0:00 axle removal
3:58 adapter plate and pressing
14:55 axle install
As an Amazon Associate I earn from qualifying purchases
Some tools I recommend:
Milwaukee 3/8 impact: amzn.to/3SVi7pv
Milwaukee electric ratchet: amzn.to/3SLa9yN
Box end wrench: amzn.to/3TQMhei
Brake line pinch off tool: amzn.to/3sFeJUF
Wheel bearing press adapter: amzn.to/3zmeqC5

Пікірлер: 48

@manicmods 3 ай бұрын

Good press work, but don't forget safety glasses! Thank you 💪💪

@turdsandwicher Жыл бұрын

That top spring is a pain in the ass! Good idea using two pliers on the parking brake cable I struggled with mine for a while.

@shoptimewithdrew Жыл бұрын

Ya top spring is the worst part probably

@leftcoastdrifter 2 жыл бұрын

This is a great example of paying for what you get. I'm sure many other people could "DO" this job but how many of them would do it correctly. Sadly, not many. Glad to see there are a few good mechanics still left out there.

@shoptimewithdrew 2 жыл бұрын

Thank you for your support

@nordicpride9708 10 ай бұрын

This isn’t the space shuttle… he did a great attention to detail job here, but it’s not a super difficult job. Especially for a Toyota tech. Bet he’s done about a half million of these between tundras, Tacomas and 4Runners. Love the fact it’s rust free! Makes it fun to work on.

@leftcoastdrifter 10 ай бұрын

@nordicpride9708 why would you comment something like that to my comment? Like, you took time out of your day to disagree with a random positive comment on the internet because...? Do you not have better things to do with your life? A job. A wife,gf,bf? Family? Friends? Neighbors? Please, get help and get well ❤️

@nordicpride9708 10 ай бұрын

@@leftcoastdrifter A little bit of a overreaction on your part. I stated it’s not a difficult job. Maybe try less sensitivity

@leftcoastdrifter 10 ай бұрын

@nordicpride9708 I see you missed the point of my comment. I really do care about your mental health. Please, talk to someone, anyone. It can only help.

@stevanrose7439 2 жыл бұрын

I just did this job to my truck and saved enough for a new press.

@shoptimewithdrew 2 жыл бұрын

Nice they are not to bad to do. Glad you got it done and saved money.

@kevinmeraz1566 2 ай бұрын

Can you make video on how to change the transmission fluid with filter change on a 3rd gen tacoma thanks ☺️

@jmpattillo 7 ай бұрын

This is one job where I was happy to pay a professional.

@shoptimewithdrew 7 ай бұрын

It is nice if you have all the right tools.

@blthep1411 Жыл бұрын

Very nice video! There are not enough videos out there about work like this on Tacomas. Thankfully they don’t need work like this often but because of the video, I could definitely do this myself instead of paying probably a grand at the dealer. Does the Amazon puller linked have all the parts needed? Looks different than what is used in the video, I’m assuming dealer/oem tools vs aftermarket?

@shoptimewithdrew Жыл бұрын

We have the amazon one now, and it works well. The factory one has adapter plates that always get screwed up. The job is not that bad to do. I also hope to do a more in-depth video someday with more explanation.

@Gregg0112 Жыл бұрын

Why reuse the seal in the diff? Do they never leak

@shoptimewithdrew Жыл бұрын

I replaced the seal just didn't video it. Also the seal is actually what normally takes out the bearing. The seal will leak and gear oil will get in the bearing and take out the grease. Both your comments are good. I was wondering if someone would ever ask those questions because I was kicking my self for not adding it in the video. Thank you

@CreativeMindz240 4 ай бұрын

Just wondering how much would this job cost for both sides? Thanks

@shoptimewithdrew 4 ай бұрын

It's probably around $600 for labor.

@Overlandlife_ 9 ай бұрын

Hoping this fixes my rear wheel wobble. Just ordered a bearing

@shoptimewithdrew 9 ай бұрын

Some model year tacomas have had issues with the rear axle being out of round. You have to measure it with a dial indicator.

@Overlandlife_ 9 ай бұрын

@@shoptimewithdrew mhmm not sure it’s going into the shop next week but I do have a 2016 trd off-road rear diff in my 15

@Overlandlife_ 9 ай бұрын

@@shoptimewithdrew what’s the chance your close to ga If so I’ll just get it hauled to you lol

@shoptimewithdrew 9 ай бұрын

I'm in Oregon, so that would be a big bill. Hope you can get it figured out. I know some places sale complete axle and bearing setups. I'm not sure how good they are. I've never used one.

@Gregg0112 Жыл бұрын

Did you pinch off the flex hose at the center of the axle because I didn't see anything on the end of the line to prevent it from draining the reservoir

@shoptimewithdrew Жыл бұрын

Yes you are correct I used a hose pinch off tool on the flex lines just forgot to video that.

@alexsmith-fj9qk Жыл бұрын

Would a dealer let me bring in just the axle and I do the rest? Thanks for a great video.

@shoptimewithdrew Жыл бұрын

I know our dealer will. You will just have to call them and find out. We charge 50% of the labor for the job. In our region, it would cost around $225 just to press the bearing off and on.

@alexsmith-fj9qk Жыл бұрын

Thanks for the reply!

@shoptimewithdrew Жыл бұрын

Your welcome.

@ANDRESHERNANDEZ-hu5kr 2 жыл бұрын

What would this job cost ? Ball park?

@shoptimewithdrew 2 жыл бұрын

I think it was 3.5hrs and at are dealer we charge $150 per hour.

@shoptimewithdrew 2 жыл бұрын

Probably another $500 to $700 in parts

@johnskeeter5020 5 ай бұрын

How much would this job cost at the dealer?

@GovShtDwnChimps 5 ай бұрын

My mother was quoted at 1800 for just the passenger side a week ago.

@shoptimewithdrew 5 ай бұрын

Depends on your location. we are about 900 for parts and labor. 1800 seems like a lot.

@pedromorales5608 Жыл бұрын

If you have the proper tools for the Job, is not that hard to DIY, the parts are cheaper at NAPA and the bearing tool you can get from Amazon

@shoptimewithdrew Жыл бұрын

This is all correct thank you

@Resistculturaldecline Жыл бұрын

If you spend the money on tooling, and time to do it, use the saving to buy OEM parts (if still available). 99% of the time, a common parts store brand won't be equal quality to OEM.

@shoptimewithdrew Жыл бұрын

Yes I recommend OEM parts for all jobs if available. If someone wants to save money on parts going aftermarket that is fine but it may cost you more when you have to replace the part again. Build quality is not as good as factory and that is why it is cheaper.

@pedromorales5608 Жыл бұрын

They have the Koyo brand, it is the same brand that comes inside the Toyota package.

@Resistculturaldecline Жыл бұрын

@@pedromorales5608 Awesome, good info. Finding the supplier if possible is what I often do also. Ive used SKF and Timken bearings when oem boxed parts werent available. Bando belts, Aisin, Denso, NGK, and the like - all have been 100%. Thanks for the info