Toyota Tundra Overland Build | Ironman Raid Series Front Bumper

No video

Toyota Tundra Overland Build | Ironman Raid Series Front Bumper

Рет қаралды 1,926

Күн бұрын

Today i am installing a ironman 4x4 raid series front bumper on my 2019 toyota tundra overland build, along with a openroad 13k winch. The bumper came out great, its a lightweight, high clearance, low profile off-road winch bumper. Suits our overland build on the tundra perfectly. The install was super straight forward and the bumper had no fitment issues whatsoever. The tundra is almost ready to hit some trails and so some #overlanding. Thanks for watching, comment below if you have any questions.
00:00 Introduction
01:47 what the bumper comes with
03:04 factory bumper removal
03:48 starting install
05:20 mounting winch tray
09:34 mounting ironman recovery points
11:58 Mounting Winch
17:29 mounting bumper
21:49 Final Product looks sick
#ironman4x4 #ironman #raid #bumper #tundra #overland #build #overlanding #fullsizeoverland #tundra4x4 #tundra4wd #tundraoffroad #tundrabuild #openroad4wd #winch #13kwinch #toyota #trd4x4 #trdoffroad #fullsize

Пікірлер: 28

@treyveston7965 4 ай бұрын

Just ordered one for my 2021 1794 Edition. I really liked your install video. It showed the main concerns I had about installing this and convinced me to get a winch before installing the bumper. Since I have the fancy model, it was tough to find a bumper I liked that didn't interfere with the grille sensor and had provisions for the parking sensors. Hopefully I can get the factory fog lights to work with this bumper. I will have to fab a bracket, but not a big deal. I will definitely be watching your video when I install mine!

@bfm_overland 4 ай бұрын

Awesome! I think you will like the bumper, I love mine so far! Yes definitely get a winch before, so you do not have to take it all apart again! Thanks for watching 👊🏼👊🏼

@arnoldguzman6981 3 ай бұрын

I just ordered that winch for my raid bumper.

@bfm_overland 3 ай бұрын

Nice! I have had the opportunity to use it 3 times now, twice in mud and once in sand. It works great, just make sure your wireless remotes are working 100% of the time. I had issues with mine and they sent me a new controller with the transmitter and I haven’t had any issues since.

@arnoldguzman6981 3 ай бұрын

@@bfm_overland bad ass man the winch you got is it the 2s plus? Did it fit with the won’t til box mounted up top you didn’t have to relocate it? I’m running the same iron man 4x4 bumper.

@bfm_overland 3 ай бұрын

@arnoldguzman6981 yes the 2s plus, it fit in there perfect without any modification!

@arnoldguzman6981 3 ай бұрын

@@bfm_overland we’re all the connections away from the coolant lines? I don’t want them to rub and wear out the insulation on the wires. I should be getting it tomorrow and installing tomorrow.

@texanerection492 3 ай бұрын

Just commenting to get a notification for his response 😅

@mbuell84 4 ай бұрын

Did you lose any lift on the front with the added weight?

@bfm_overland 4 ай бұрын

Nothing really noticeable, the bilstein 6112 I am running up front compensated the weight well. The bumper is really not too heavy compared to a plate bumper.

@user-uo6th6pw6c 8 ай бұрын

The Truck is looking great! Do you have a link to the winch you put on?

@bfm_overland 8 ай бұрын

Yes! openroad4wd.com/products/13000-lb-winch-with-synthetic-rope-and-2-wireless-remotes-panther-series-2-s?variant=42546235146403&gad_source=1&gclid=CjwKCAiA1MCrBhAoEiwAC2d64XW0FatchHl6ytXjahgu69ER_qeEGL4nq2teYSU5Mi35XNlsbBvZvRoC_eMQAvD_BwE

@user-cb6if4do4y 6 ай бұрын

The Winch looks like a tight fit behind the bumper since it pokes up a bit. I bought the raid bumper with all the lights from ironman and was wondering if there is enough room for the winch to fit with the light bar installed?

@bfm_overland 6 ай бұрын

Yes plenty of room! It’s a tight fit by the cooler lines for the winch. But as far as the light bar goes, there is a good amount of space in between that and the winch

@arnoldguzman6981 5 ай бұрын

What winch did you instal?

@bfm_overland 5 ай бұрын

OpenRoad 13k!

@elkiro1000oficial 8 ай бұрын

I follow you and like your videos there mamalones but the music is borring!😢

@bfm_overland 8 ай бұрын

Haha alright I’ll keep that in mind! Thank you for watching!

@shanerogers787 5 ай бұрын

Do you think it would work with the trd pro skid plate ?

@bfm_overland 5 ай бұрын

Yes it should, it doesn’t cover or change any mounting points for skid plates

@shanerogers787 5 ай бұрын

⁠@@bfm_overlandthank you. I was thinking the skid plate bolts where the new recovery points bolts up. If doing it over again would you buy it ?

@bfm_overland 5 ай бұрын

@shanerogers787 oh yea, I love the bumper. And get compliments on it all the time. I have winched off of it several times now with no issues. It’s been great so far!

@shanerogers787 5 ай бұрын

@@bfm_overland thank you again , i love the look of it. Especially for the price. I want the matching rear but not sure it’s a necessity. Did you get the light bar for it or just leave it empty. I was wondering if leaving that empty you could see the winch better. I’m looking at the winch you recommended also. Glad to hear the set up works great.