TP4056 Explained: Functions, Limitations and more

Рет қаралды 35,896

Жыл бұрын

how to configure the NTC temperature detection
www.best-microcontroller-proj...
music
Modern Situations - Unicorn Heads
donate
toss.me/wb1016
github.com/sponsors/wb1016

Пікірлер: 43

@viswanathanramakrishnan7613 Ай бұрын

Thank you so much for high lighting about TP4056 boards and their characteristics. Now I am fully aware what to do. Once again thank you so much.

@elektron2kim666 Ай бұрын

Found 20 on sale/special discount. It was nice to hear this info to investigate what I got. My current charging systems are "all over the place" and I wanted to organise this and learn some more.

@marco_the_maker Ай бұрын

I am a novice electronics guy and have been using these for a while. However, your video taught me a lot and was very informative. Thank you

@funbucket09 10 күн бұрын

Thanks for the great info! I found 10 of these for 8 bucks and your video helped me figure out I had the last version you mentioned. Seem to be working OK so far trying to recover some over discharged cells.

@stinkycheese804 3 ай бұрын

Thanks, I appreciate your taking the time to describe the differences in these very similar modules. I have yet another variant which is similar to your latter examples, is USB-C and "4056" on pcb front and no markings on the rear, but the chip markings are a little different with (no branding) 4056H, 8205LA, and DW01-A

@lrita7179 Ай бұрын

Thank you. Excellent content. This gave me a better understanding of what I need to look for when buying TP4056 modules.

@malcolmmackenzie6764 8 ай бұрын

Thank you so much for this! Trying to add charging to a project for the first time!

@pravinkumardhanabal4777 Ай бұрын

Can we connect multiple batteries to one tp4056 module for charging it? Also what happens if modern smartphone chargers are used (like 20w, 60w)

@blue_on Ай бұрын

yes you can connect multiple batteries in parallel. also, TP4056 only takes 5W from charger.

@mmshilleh 11 ай бұрын

Really helpful video learned a lot about this module and its variants, thank you

@daverei1211 7 ай бұрын

Thank you for the information on the temperature protection. This board is good, but was missing detecting when the battery was overheating. We’ll done.

@-EE-TMTPiyumal 11 ай бұрын

You saved my day bro!

@dastin7276 6 ай бұрын

Thank You.

@JohnyRalte 8 ай бұрын

very helpful video

@Middle-Eastt 9 ай бұрын

Nice

@Mortankhamun 2 ай бұрын

Can you recommend a good P Channel MOSFET to use for the configuration shown at 7:08? Thank you!

@blue_on 2 ай бұрын

not fancy MOSFETs are required. AO3401A will do the job.

@Mortankhamun 2 ай бұрын

Thanks!

@kryptocat4240 9 ай бұрын

I have 2 Samsung 2500 mAh cells connected in parallel Total capacity is 5000mAh Can i use single TP4056 module to charge it or should i charge them separately by TP4056

@blue_on 9 ай бұрын

as you connected them in parallel, total voltage is 3.7V and it means single TP4056 is applicable.

@gackhuhn4868 3 ай бұрын

6:38 arent those scematics from slime vr?

@kennnnnethchua 7 ай бұрын

Is it possible to use just one 4056 to charge two 18650 batteries connected (parallel) ?

@kennnnnethchua 6 ай бұрын

@@oleganonimka3725 I tried using one 4056 to charge two 18650 batteries connected (parallel) but it gets very hot. I don't think its safe.

@blue_on 6 ай бұрын

@@kennnnnethchua it is safe. problem is that the TP4056 is linear charger. meaning it just dissipates exeeding voltage into heat. it makes TP4056 chip hot whie charging large battery. you can use IP2312 instead.

@rc3d490 6 ай бұрын

How i make a reverse polarity protection formthe Charger?

@stinkycheese804 3 ай бұрын

There is no need to do this. However you could put in a blocking diode. It is no different than polarity protection for anything else.

@waqastariq5941 4 ай бұрын

can this chip support charging from output points.

@Legend813a 4 ай бұрын

@alsharksee 3 ай бұрын

@piotrekniew 9 ай бұрын

Hello. Can i make for module to work all time? For low power consumption

@blue_on 9 ай бұрын

you can use ICs that has power path control like BQ25606. or even all-in-one IC like IP5306.

@MrBobWareham 6 күн бұрын

The video was good and very helpful, just very noisy with the music, stop the music please.

@blue_on 6 күн бұрын

cant edit the video after it is uploaded. but i will note that in future uploads.

@rickhuntraslam2925 4 ай бұрын

The only good information is about turning on temperature protection and it only says so at the end and doesn't explain anything about that, make another video explaining this feature plz

@stinkycheese804 3 ай бұрын

Disagree completely, it is very useful to distinguish the variants of this board because often the seller does not provide the intricate details. On the other hand, it was pointed out to consult the datasheet for temperature implementation which is correct. We can't very well hold your hand and wait for you to supply specifics of your design requirements and then calculate that out for you. If it is beyond your understanding to use a datasheet to work out the component values and topology, then you should leave it alone as it is beyond your skill level, and frankly, probably dangerous for you (or others in your absence) to be messing with DIY charge and discharge of Li-Ion batteries at all.

@Big74Mike2012 Ай бұрын

Yyeeaahhhhh... except he DID in fact explain how to disable the temp function and how to configure it if needed. Not only that, he goes on to explain where you can get more detailed info for this feature. It seems strange that even with the ability to rewind as many times as is necessary, you still somehow missed this info. 🤔🤔🤔