TP5100 2A LITHIUM BATTERY CHARGER MODULE 2 MODE 4.2V 1S & 8.4V 2S

  Рет қаралды 24,915

aNgGaBOYZ Channel

aNgGaBOYZ Channel

4 жыл бұрын

Modul charge tpa 5100 untuk 1S, untuk gunakan 2S 8.4V dibagian jumper yg 'SET' harus dihubungkan dengan cara disolder. Features: - Double 8.4v / 4.2v lithium rechargeable single - Programmable charge current. 0. 1A-2A - Programmable steady precharge current 10% -100%. - Wide operating voltage, maximum reach 18V - Red and green LED charge status indicator - Chip temperature protection, overcurrent protection, undervoltage protection - Battery temperature protection, reverse battery shutdown, short circuit protection - Switching frequency 400Khz, usable inductance 20uH and more - PWR_ON Power battery for switching control - Default settings: 4.2V 2A. The board has with LED, and LED's external reserve position. - Size: 25 * 17 * 5mm ultra-small size - Input voltage: 5-15V DC power supply - Charge status: full and unloaded blue lights, charging red. Maximum Ratings: - Static input supply voltage (VlN): 20V - BAI: -8.4V-20V - BAT Short-Circuit Duration: Continuous - Operating environment Temperature range: -40 -85 - Storage temperature range: -65 - 125 TP5100 is a double switch buck 8.4V, single cell 4. 2V lithium battery charge management chip. Its ultra-compact QFN16 package and simple external circuit, making TP5100 ideal for portable equipment so large current charging management applications.Meanwhile, TP5100 built-in input overcurrent, undervoltage protection, over temperature protection, short circuit protection, battery temperature monitoring, reverse battery protection. TP5100 have 5V-15V wide input voltage, dual battery trickle charge into pre-charge, constant current, constant voltage three phase, pre-charge current trickle charge current through an external resistor adjustment, the maximum charge current up to 2A. TP5100 with a frequency of 400kHz switching mode makes it possible to use a smaller outer Suo device and the large current charging still maintain a smaller amount of heat. TP51OO built-in power PMOSFET, anti-intrusion circuit, so no anti-intrusion protection and other external Schottky diode.
link pembelian : invol.co/cl4b1a8

Пікірлер
How To Make Lithium Ion Battery Fast Charger
13:18
EASY TECH
Рет қаралды 42 М.
What it feels like cleaning up after a toddler.
00:40
Daniel LaBelle
Рет қаралды 83 МЛН
TP4056 myth busting
9:07
bigclivedotcom
Рет қаралды 319 М.
Protect your 18650 battery by this
3:55
Creative & Duck
Рет қаралды 85 М.
Dangerous vs. Safe batteries, Explosion and fire test!
8:28
GWL Group
Рет қаралды 2,2 МЛН
So what does a 'Balance lead/tap' do anyway?!
9:11
Painless360
Рет қаралды 15 М.
How To Double The Life Of Your Lithium Batteries
11:55
EbikeSchool.com
Рет қаралды 456 М.