Tracing of SKETCH on a placed image in CATIA (3D-Sketch)

No video

Tracing of SKETCH on a placed image in CATIA (3D-Sketch)

Рет қаралды 23,490

Күн бұрын

In my previous video. I showed you guys how to place an Image in CATIA : link : • How to add or place an...
In this video Ill show you how to Trace the Image in CATIA. And i have shown only the starting.. follow the same steps and you can complete the model.

Пікірлер: 32

@user-oi1mm1sp1p 5 жыл бұрын

If you look at the video, you will see a 3d line drawn on the blueprint surface. In a space without anything, the line seems to be bound on one side and can not escape. I do not know if the contents have been correctly transmitted because it was written as a translator.

@JasperAaronJ 5 жыл бұрын

Its because of contrains.. You can control that too..

@jerry_blends_creations7796 4 жыл бұрын

In which workbench you are working with 3d curves

@JasperAaronJ 4 жыл бұрын

in surface workbench.. follow my previous video.. :)

@jucaesar4961 2 жыл бұрын

During the generation of the 3d Sketch, how do you set the points? For me, it seemingly doesn't quite work, no points get generated when I left-click. Do I have to be in a sketch?

@jucaesar4961 2 жыл бұрын

I have been able to place points now, but only in isometric view, and only in the XY plane... what could be the solution? I use CATIA V5-6R2018.

@alfieko7375 6 жыл бұрын

That's Great, Hi Jasper, How to appear z axis control each point in 3D curve?

@JasperAaronJ 6 жыл бұрын

alfi eko just by revolving our work space.. We can use sides or views as axis

@singinginmyblood7061 4 жыл бұрын

@@JasperAaronJ Not Working in me another method

@mehransoleimani4308 Жыл бұрын

❤❤❤

@itsjustcam247 4 жыл бұрын

How'd you get into generative shape design? The last video ended in Sketch tracer.

@light3739 4 жыл бұрын

Once you r done with the importing images stuff... Right Click on "product" on the tree (Select the "product") click on Start> Shape> Generative Shape Design.

@muthuganesh4941 4 жыл бұрын

Bro..in 3d curve How i drag the point vertical direction to my convenient one.....

@JasperAaronJ 2 жыл бұрын

It shows the direction when you choose an entity. It should be fixed in a plane in order to move un only one direction

@R_Harrison_ 5 жыл бұрын

anyone find when they drew the line from the top looking down, it wouldnt then move up to where it needs to be, like it was stuck

@JasperAaronJ 5 жыл бұрын

Ryan Harrison noo.. You can just click twice on that image.. That will show you arrows that can be controlled.. :)

@rk2423 5 жыл бұрын

how to shift from sketch tracer to surface workbench.. please guide new window is getting open..

@JasperAaronJ 5 жыл бұрын

Simple.. Just click on model tree.. Then change your workbench to surface modeling..

@rk2423 5 жыл бұрын

@@JasperAaronJ its not working..new part window is opening instead of shifting..

@rk2423 5 жыл бұрын

@@JasperAaronJ i add the part and editing part body but 3d polyline is not able to drawn on front view of car..

@JasperAaronJ 5 жыл бұрын

@@rk2423 it might be because of constains.. Check it

@JasperAaronJ 5 жыл бұрын

@@rk2423 then you must have saved your work in different workbench.. Try again

@alfieko7375 6 жыл бұрын

And what version of catia do you use? thank you

@JasperAaronJ 6 жыл бұрын

alfi eko i use catia V5 R19

@Coal227 5 жыл бұрын

Bhi Meri car ki blue print blank ho gya hai Mai u se kaise sahi karu help me

@JasperAaronJ 5 жыл бұрын

Shivlal Patel you know english.. I can only understand little bit of hindi.. I guess you are asking help for your car design..

@singinginmyblood7061 4 жыл бұрын

How to move the point in vertical direction #3:51

@MrBenio2 4 жыл бұрын

Quick Compass Orientation -> choose the direction or use the ''most seen plane''

@kcw3928 4 жыл бұрын

@@MrBenio2 I'm having the same issue. Even more, it seems I can only place these points on the XY plane. No other, not even if I start with my view on a different plane or quick view. I feel like there is some sort of setting I may be missing.