Hello Mike Thanks for the advice on the PTO. I had a hard time last week trying to put on mine until my neighbur came to my rescue- just like you did for yours. I wished I had seen your video a week sooner. Great channel!

As soon as I heard "extreme brush hogging" I knew I was on the right track. You were exactly right- it was not obvious that a hose had been pulled out of the proper seating in the coupler underneath the tractor. Thank you!

Mike I could hug you like the service manager story. My 3 point hitch was going up and down very slowly. I let a fence installer borrow for the use of the bucket and then it would not go down at all. I you tubed your sight, as I had seen some of your vids before, and Eureka the knob was on lock. Wow what a relief. Many many thanks

Glad I watched your video. I had my front end loader hydraulic line come undone while shredding pasture. You saved me! Followed your directions and got the line back together. I have a JD 5075M with loader and 7’ shredder.

Hi Mike, I really thank you for your video about hose couplings coming loose. You saved me a lot of time and frustration. Keep up the great advice

Haha - I've been fooled by both the 3-pt hitch trick and the PTO shaft trick. It happens to everyone. Thanks for the tips. Keep up the great work.

Just got my first tractor and I think that this is just about my favorite instructional video. I truly appreciate that!

Mike: you really helped me today . yesterday I was clearing a tree line and my loader stopped moving . There was no hydraulic geysers or puddles and I checked the quick disconnect but I didn't inspect it closely. Your video made the point that a loose fitting can be hard to spot , sure enough you were right , that was the problem. You were also right that the lower hose is a PITA to get reconnected There is place set for you in heaven brotherman , Thanks so much, I need that machine and I have it back, you saved me a lot of time. Take care and keep making videos, great work.

Hi Mike !! Love your showing three common problems and how to fix them. The photo support is superb. Nicely done as usual. - Dean from Minnesota

Hey Mike, thanks for the tip. I have a new 40hp MF and have 30 hours on it. Yesterday, the front end loader would not tip forward or pull back. I researched your info. I had been bush hogging in high material. You suggested a hose had come loose. You were spot on. Reconnected and works great. Thank you my friend. 👍😃

You just saved me hours! I just picked up an old Yanmar 2210D and the manual isn't too clear on 3-point hitch troubleshooting. It was stuck in the up position. Someone really cranked that control knob tight. All it took was a little movement toward the open position and it was working again! You have a new subscriber.

Good advise, these type of easy to fix issues can cause much stress and frustrations. Been there done that! Thanks for another good information video Mike.

I've a new 2017 Case bought in 18. Enjoyed the insight. I'm leaving my loader on.

Thanks Mike bought a new grapple worked great for a few days then VIOLA , took your advice looked at all the lines to the grapple from the 3rd remote and just like you showed us the coupler was not plugged in all the way ...THX !

Thanks for the great tips, Mike! Didn’t know about the 3 point lock feature with that adjustment knob. That’s good to know! I have had that very same fight with the PTO shaft until I remembered to pull back on the collar.

Good tips, Mike! Hope I’ll remember them when these things happen to me!

It's the little things ....! Love the videos Mike, pretty sure I've watched them all now. Great resource for new tractor owners like me. Keep them coming!

Thanks so much for posting this. It just saved me a ton of time trying to diagnose a hydraulic issue while reattaching my loader!

been watching you for two years, and still learning (and using your products). thank you.

Hey thanks Mike, never would have expected a coupler to come unhooked on its own, but looking closely it had, easy fix once I figured out how to take the pressure off as it was in a raised position

Quick, easy to understand and meaningful tips. Perfect. Please do more of the same.

Hydraulics failed with heavy work. Thought it was a 1000.00 repair. Had to leave my Kubota in the field since the bucket was flat with the ground. Watched this video and thought it was worth a closer look. To my intense relief, it was an un coupled line. Fixed it just like tractor Mike said. Thank you sir. Sincerely, thank you. Your a great human.

Thanks Mike for all of your Great Tips and for all of your hard work and dedication to educating those of us who are new to tractors and even the seasoned farm hands.🤠🚜🇺🇸

Thanks Tractor Mike! I buy and sell used tractors under 40 horsepower as a hobby. I picked up a Ford 1900 tractor (around 30 hp) and didn't look at it too closely until about 3 weeks after I bought it. I paid just $5,000 because the seller had jus tpurchesed it and couldn't get the 3- point hitch to work. The seller was right... it didn't work! I checked for answers on KZfaq and your "Three Common Tractor Problems" video showed up. I watched it at 1:00 am in the morning and immediately went to the shop. You were right! The knob you talked about was turned off completely. I started the tractor and turned the knob open and the 3-point hitch works just fine! Thanks again!

Great stuff. Right to the point and -- clear answers that many of us want to know. Thanks for the share!

I love this video, as a mechanic, I deal with at least one of these issues a lot during the month. Thank you for posting this!

Thank you so much Mike. You repaired my front loader not going up issue with a twist of my right hand!

Hey thanks for the useful tips. 3pt quit working today while i was using tractor. Valve must have vibrated shut. Less than 30 seconds and moving again. Never even thought of turning the Valve

Thanks for taking the time to make your videos Mike!🚜✌🏻️

Mike, I've owned my New Holland 1925 for 24 yrs since new. Learned more from you on how to properly run a tractor in the last 3 months when I dicovered your channel than I have in all those years! And the tractor seems happier too!😂😂

Good video. Not all folks that own a tractor are or were farm folks. Thanks Mike.

Thank you, I was able to get my 3 point hitch to move up and down again because of this video.

Thank You Mike . I just had the problem with PTO arms not going up or down today .... Found your video while searching for some insight to this problem . I went back outside and turned the knob below the seat and the arms fell to the ground ... Thanks again !!!👍👍

Thanks Mike for those helpful tips. I will admit that I was guilty of that PTO problem.

Thanks Mike! Some great tips. Really appreciate it. Cheers!

Great advise! Thank you

I'm so very grateful for your videos Mike. Thank you!

I really like your channel it has been a lot of help to me ...Thanks!

Great video! Very helpful. Thanks Mike!

Love your common sense easy to understand videos Thank You for your time and knowledge

Great info, thanks for sharing.

We have had that PTO coupler give us trouble several times because the little ball bearings inside were either rusty or had dirt in them and would not move. We keep everything well lubed but this one happens because the end of the PTO shaft was left hanging in the dirt when it was not on the tractor. We now use a couple large wire tie straps to hold the shaft up to the top of the three point hitch when it is not attached to the tractor.

Thank YOU for your fix on three point lock! It helped me on my new Kubota m6-141.

Another great video! Thank you Mike!

You sir are awesome! Thank you for sharing your knowledge 🙂

Thanks those tips will come in handy at some point for sure. 👍

first i checked the fluid level, then checked for a loose hose connection... yep, problem No. 1! solved! me is big hero after watching this video. thanks dude.

Two years ago you and your family did the funnyist christmas video I ever seen. Please do another this year.

Once again, you've save the day Tractor Mike. My hydraulic dial under the seat needed adjustment and Bingo! Bob's your Uncle! Thanks heaps

Awesome video Mike Thankya for sharing.

I ran into a 3 point hitch not going up or down on my tractor a while back. This is probably specific to my brand of tractor (John Deere). When I first bought the tractor it came configured with a loader/bucket on the front and a backhoe on the back. To run the backhoe it uses a system called "power beyond" where the hydraulics hook up with a supply and return from the tractor to the attachment. When the backhoe (or any other attachment that uses the "power beyond") is removed the supply and return hoses on the tractor need to be connected together. If not, the three point hitch will not function. I luckily figured it out before an embarrassing trip to my local dealer.

Thank you for excellent maintenance advice. Is there common maintenance issues for specific brands? Again thank you

Mike... God bless you, sir. Six years ago I parked my old International Harvester 244. I thought it was totaled. I had changed all the fluids and plugs... but the 3-point didn't work. My finish mower would drop down and wouldn't raise. So, discouraged, I parked it and let it sit for years... Time went by. Children were born. Time passed... and then today I got a wild hair and decided to revisit the old machine... She needed a new battery. And some fresh fluids. But she fires up strong! 💪 AND NOW THANKS TO YOU THE 3-POINT WORKS!!! 😆🤘 It lives on!! Thank you for helping my uncle's legacy... it was his tractor. Now it will work the land again. He's smiling down at us in heaven. 🙏 *SUBSCRIBED*

Great stuff Mike!

Mike you are great. Thx for taking the time for your video you really helped me

thank you so much for your advice

Thank you for your help. I was able to resolve problem #2!

good info, keep up the good work. tip to tractor owners, read your owner's manual and maintenance manual every once in a while, lot's of good info in those .

Great info Mike.

Thanks for the tips very helpful

Big help Mike . TY

Thanks sir for all your help. Thanks

Great video - Thanks!

Thanks for your video mate been big help cheers

Thank you sir. Such a big help

Thanks for posting this

Mike, great channel. I've learned so much about my tractor by watching your channel. Being a newbie to tractor ownership your advice has been a life saver. That said, I'm having an issue with my MF 1533. I tractor will not pull in 1,2, or 3. It will only pull forward in 4 low (turtle). I'm trying to figure out to how to determine if I need a new clutch or if this is something I can adjust on the tractor. I don't want to take to the dealership and pay $2k if it's a relatively easy fix. I'm looking for to hearing from you.

what a great help..Hi Mike , i have a SAME Laser 110 where about the adjustable knob for my 3 point hitch, it not even goes up plus those three gear levers any manual how to used them, i'm driving a Ford, messy ferguson, Kubota but little knowledge about SAME

Great video. Very useful.

Good video, sometimes you don't know what you don't know!

Thanks! It worked! Problems solved!!

Wow, I was about to call the service department because my three-point was getting very hard to move up and down on my JD 3033R. Saw your video and found the knob under the seat. It was cranked almost shut. Opened it up and everything works great. I could give you a big kiss. 😀

Nice video Mike. Do you have a video on setting the range of motion of the 3-pt (not the draft/float control)? On my New Holland TN75a, there is a level on the rear axle housing that sets the range of motion for the 3-point???

Dang, I ain't ever seen a second collar (on the PTO implement) that moved forward like you show'd. I can see why he had a heck load of trouble. All I'd seen is the pull'n back style - but not both. Good to know! Thank's Mike!

Tip #2 just saved my life!!

Mike I almost fell off my stool......my nephew spent one whole after noon trying to remove the tiller on my tractor......I told him to go sit in seat and work the loader valve......10 seconds later had him turn around....never told him how I released it. Kept him from "borrowing" my tractor for months.

You're awesome!!!!! Now my PTO lowers. Hooray!!! I should have subscribed sooner 😊

Thank you! Now I know how to operate the 3 point thourghly!!

thank you, lol you just fixed my loader on my 1948 Allis Chalmers wd!

Best self help video. Question on three point won’t move issue. Have a HESSTON 80-66. Haven’t ran it for three years starts up,and ran fine. But lift won’t work Yes the knob was screwed all the way in. I opened it and still won’t move. I also had to put 2 gallons of hydraulic oil in. Could the hydraulic valve be frozen from sitting three years. The knob does open and close. Thank you. Cape Girardeau Mo.

Thnaks, Mike! I just subscribed to your channel!

Grand video, and I don't even have a tractor (yet)!

Howdy, I have a dk45 kioti that I installed a koyker loader. My tractor has a hose block that you have to turn a slotted screw to run the loader, but you 3 point won't work or visa versa. What is the work around so both will work? Thank you

PTO shaft on my snow blower works the same way. Spent an hour one time before I figured it out. No hammers or pry bars though.

Mike, I have a sensitive discussion question for you, what is your view on "The Right To Repair" ?

You are doing a good job helping

Thanks for your help was loose connection

Mike I have a jinma 284 tractor the three point is really jumpy going up and some times slams,can you give suggestions

Good video

Thank you!!!!!

Thank you I had a tree fall on my loader and I couldn't get the bucket to tilt it was exactly what you said I had a line barley plugged .in ....

GUILTY - of loading up the NH tractor and driving 2 hrs roudtrip to find my prob was that Turtle/Rabbit knob... hardly any videos on tractors for city folk who weren’t raised on a farm/ranch. Latest... seems today like my lift (weight load) capacity is poor on the front loader. Also, have the same connects to my front bucket you show on the video, wish I knew what to call it and what kind/model fork lift accessory I could put on it if the bucket were removed ...

Hi Mike great info on the PTO shaft. I have a long tractor that the 3 point does not go up or down and also does not have the knob under the seat to adjust. Do you happen to know what else I can do to get my 3 point to start working. Any help would be greatly appreciated. Thanks.

0:46 The loader quit working all of a sudden 1:58 the 3 point won't go up or down 4:02 can't get the PTO shaft on or can't get it off Hope was helpful🙂

I have a Kubota B2910 HST. I will run into a problem occasionally that the loader bucket will not operate as well as my lift for my 3 point hitch will not lift. It happens quits the same time. It is not a consistent thing, probably happened about 4 or 5 times over the last 6 months. Then I fiddle around rocking levers back and forth and aftr a while everything works again. I have changed both transmission filters but it did not fix the problem. There is a suction screen on the hydraulic reservoir could that be the next thing to check. Thought I would ask since I have to drain the system to check the screen. ANY THOUGHTS?

wondering about changing out the pressure line for the power steering...any videos or info on that would be greatly appreciated.

thanks Mike.I'll do that

Great video! I have a LM35. Less then 200 hours, my shuttle shift is stuck in reverse. everything else works normal. Any suggestions?

Mr. Tractor, I have a 2130 john deere, recently I had to replace the rock shaft, bushings & seals. When all was said and done started her up and the 3-point lift arms went straight up, only after several hours did they lower. Any input will be greatly appreciated, thanks

I have a Case 580 coming late 60s it won’t move except every so often it will just kick in and go so it doesn’t seem like it should be the clutch, not very familiar with the system some people say maybe just the filter but I don’t know. Any advice would be appropriate.