Building a Water Pump Without Electricity - Ram Pump for Agriculture and Plantations.
(RAM PUMP) which does not require electricity and without a driving motor.
NOTE: The Traditional Channel line in this 4th edition ("ieteuga ram pump") reinvents the Hydraulic Ram pump, which lifts a certain amount of water from a lower place to a higher place from the source.
Using the same pump, namely the Ram Pump using the best quality 3 inch PVC material and easy to get on the market and cost effective.
The materials used are 3 inch AW PVC pipe, flange for the pump housing, iron lever valve, plastic fiber, 24 pieces of mor & bolts, ballast iron, and pressure gauge. for Pump Tubes also use PVC AW pipe measuring 4 inches with a length of 1.8 m.
Why use AW PVC because the pipes are very strong and easy to connect, easy to maintain and very strong so they can withstand a heavy load of 40 Kg.
technique at this location. Utilizing stagnant pool water, with concrete walls it is easier to connect the inlet pipe.
The height (elevation) between the pool and the pump house reaches 2.3 m. the length of the inlet pipe is 30 m and the length of the outlet pipe is 116 m with a very large outgoing water discharge of 9 liters / minute.
Tutorial for beginners to make a pump is in the following video:
Video Tutorial 1: • Build a hydraulic pump...
Video Tutorial 2: • Build a hydraulic pump...
Hopefully the video in this 4th edition can help the community in making their own hydraulic pump without electricity using a running water source.
Thank you for watching.
Visit @TradisionalChannel_Indonesia
#pomparam_ieteuga
#Rampump_ieteuga_aceh