Great video. I’m going to tackle my snowmobile trailer and your video is super helpful. Thank you.

I’ve taken a couple ideas from your last flat bed trailer video upgrades and it has come in handy now just waiting to re deck my trailer

Always enjoy your videos, and pick up great tips.

I used my enclosed trailer for my own lawn care business so your video gave me some idea for my lawn care business

Love the shelves. Thanks!😎

Great video. Love the upgrades!

Great video nice job taking care of all those issues and upgrades with the trailer. Looks like you got a great shop too

I really enjoy these kinda videos!!!!

Thank you for your video ! Nice work. I'd like to see a follow-up on the back-up camera in action.

Great job on the roof. Cool

Excellent video.

While you had the plywood off I’d put insulation. Good upgrades.👍🏼😎

Good video I have to do the same thing. Thanks for the links.

Hey Daniel, I live up here in Woodinville. I was watching your video as I'm about to do some similar upgrades to my 24' trailer. I'm considering doing a Raptor DIY bedliner on the floor of the trailer, but also the roof to really seal it good. You know how much rain/weather we get around here.

Outstanding video!!

special effects nice

Exelent job.. thanks for sharing.. on the roof i think there's its a joint paper roof that its used for insulated panels patio roof.. maybe works

I'd like to see you install a permanent trailer step. Those blocks of wood should be nagging you! :) Nice video

Very Good Video , any body can slow it down if need to (settings) Your One of the Very Few ,that paid attention to wheel bearings .we grew up doing this according to mileage.on straight axles . Now on front wheel drive it also easy. I really hope folks for there own wheels /gas mileages they consider this. 5*s

Damn! Might as well have built it from the ground up. Lol! Kidding...great work. But, I would’ve liked to have seen the camera inside the truck.

Very helpful 👌 ☺ 🙂

Dude kudos for using push connectors, I'm a handyman for 20-something years and when push connector came out I embrace them with a big hug, a lot of my electrical friends do not like them because apparently they claim they are old school and love wire nuts, but let me tell you this, push connector save you a lot of freaking time and I have never ever had a problem with them they work all the time and take up less space in your electrical box, thumbs up dude 👍

Where did you get them folding shelves? Thanks great video

If you really wanted to get technical, you could mount switches to your folding outriggers so that you could have warning lights come on at the front of your trailer when they are not in the up position. When all driving lights are hooked up for travel.

Nice!

Would bed liner have been a cheaper substitute for the lap seal?

Great video! Thank you for all your effort. Were did you get those metal shelves?

Spray leaking roof with a color matched Raptor liner

Did a video ever get posted or done on the back up camera? I would be down to see that in action and how that turned out. Just sayin. Great video, really enjoyed the content and dialog. CHEERS!

Did you tool the sealant on the roof? Never just apply it. You've also got to rub it in and smooth it out so it adheres very well.

F ya! That’s how it’s done boys. Hold my beeah. Thumbs up x10

About the camera does the antenna send signal to monitor in vehicle or does ii need wired to vehicle. ????

I don't like that lap sealant stuff. It works but you have to go over it every 6-12 months. Instead I usually scrape off all the lap sealant and put down a bead of something like Sikaflex and then put the Eternabond tape over the seam. They make a white Vinyl backed for rubber roofs and an aluminum backed tape for metal roofs. Comes in 4 inch wide by 50 foot roofs along with the sizes. I find it lasts much longer then the lap sealant.

Thanks!

I really appreciate you taking the time to video, edit and upload your videos. A few have given me some ideas of different things to do or different ways to do them. I'm not going to rip into you about any procedure you may do that some people consider a short cut and there will ALWAYS be a handful of people that have a better way or the "only" way they think you should do things. The way you do whatever you end up doing that works for you is the way you do it. Period. If I or anyone else doesn't like the way you have done something, they have the ability not to do it. Nothing complicated about that. What I will ask you to consider, is adding a wireless lavalier or lapel mic to your production. There are multiple brands and models for $50 or less with great, even awesome reviews and a few of them that come with an adaptor to fit most cell phones for those going that route. Some even come with two mics in the kit. One a clip on lapel mic and the other attached to a wire head band similar to a computer headset with boom mic, just no ear speakers since it's only used to hold a mic. Both mics and receiver along with pretty much all types of adaptors for most connections/jacks. No separate audio track to line up with your video since it is recorded directly to the camera. It couldn't be any easier or more affordable. Running the wire from the small waste clipped transmitter up inside your shirt to the mic ensures it will remain secure won't get caught on anything while you are moving around doing your work. This would VASTLY improve your audio which for the most part is very clear, and it would produce a much more even level of audio and keep me from having to constantly adjust my speakers every time you fade out or your audio level drops to a lower level when you turn away from your current mic setup. If you decide not to address your audio that's fine and your prerogative. I for one would greatly appreciate any attempt made on your part to address the audio level as it would make your videos that much more enjoyable. Keep on doing what you do & thanks again for all the hard work !

Great Job! Nice Work. What brand of folding shelves do you have in your trailer?

Hi Daniel what tipe of sizes it's your tires high and wide please

Is that a factory roof, or was it repaired? I just bought the same trailer.

You obviously have a old trailer with a roof like that. Flex seal worked super good on my friends trailer roof when we did his.

Good video... What is the name brand / location of where you got the foldable shelves in your trailer?

I know its been a minuet but you should have bought that roof sealant by the gallon. Been there done that.

You look like my old friend and he also has the same name as you Daniel and he works in construction lol crazy shit haha

You missed the link to the camera system...

Daniel at 2:35 you are drilling up thru the frame with the drill above your head and about 6" away from your eyes and not wearing any eye protection. Please learn quickly and get some eye protection on. It is not fun when the ophthalmologist tells you don't move your eyes or you could become blind while he starts pushing that drill bit straight into your eye to drill out those metal shavings. No joke. Take it from someone who has been there and done that.

Where did you get the natal shelves please...?

I am curious where you got the frames for the fold down shelves.

What are people's thoughts about putting the 110v in conduit? Is it a must have or overkill?

It says a 7 part series but i have only seen 6???

Where did you get that round male receptacle with the pigtail wiring?

Thanks for the ideas #Bellionaire

1/8 plywood cut it into strips an use that light weight, way to go....

I would take 2 sheets of aluminum put it over the top weld it to the edges no more seems

Take plywood out use 1by2 or 1by3 pine board light weight. Foam insulation. Flex insulation. Light weight. Light weight is the way to go...

Daniel, my question is where is your buddies at? They need to be helping you. I tell you what, can I bring my trailer over and we do the same upgrades? #buddy4life Great video!

That gangbox makes me twitch.

Lol this is my first time watching one of your videos. Did the video start with triplets or am I high?!

where did you get the fold up shelves you had in there.

Flex Seal liquid rubber

Low quality on the sound. Great build!

why dont you finish one install before moving to something else?? confusing trying to follow these mods from start to finish

Ok so what was the point of the camera???

That 4x4 is crooked.

You could've spent 5 seconds making that receptacle box look straight instead of all crooked. It's a shame you didn't. It looks so sloppy now.

NO DONT GO WATCH THE REVIEWS ON JUNK WAGOS!!!!!

You're going to throw a camera in the back. Not to smart..

You do realize that your camera is going to work only if you have the marker lights on...

OK you lost me you went from the roof leak into the less install electricity first this is not a project I think worth following

5 lug 3.5k x 2 =7k load capacity of the trailer in video?