@thebrassavolas just a usb lead from the cdj to the laptop, the CDJ has a built in soundcard so the sound passes throught the mixer in exactly the same way it does with cd's no need for external soundcards
@BEARDED_GHILLIE10 жыл бұрын
is it the same to set up cdj 1000 but with the cdj 1000 hardware instead ?
@DJRic198312 жыл бұрын
as long as you have a 4 channel mixer, and you have the pro version of traktor then yes this can be done for 4 decks
@WJReviews12 жыл бұрын
hey ric, how do i setup traktor so that when i change my volume faders, hi low mid etc on my pioneer djm 350, it also changes it on traktor software? thanks
@DJRic198313 жыл бұрын
@WJReviews i guess you mean when using traktor? well i have never even tried so aint got a clue, i have used the playlist button before but only when playing direct from USB and it works fine, but later i will try this out on traktor and see if i can work out the problem,
@audreypettorelli441611 жыл бұрын
I'm using citronics cdjs, a unmark mixer, kam vinyl decks and macbook pro and bought tracktor audio 2 I'm looking for installation instructions for tracktor onto my macbook pro?
@Djfhiso11 жыл бұрын
What do i need to connect the cdjs to pc all accessories plz mention them Thank you
@stefanovidiu785011 жыл бұрын
on setup wizard traktor what i chose pls tell me....
@ottob199611 жыл бұрын
Is this the same thing 4 the cdj 400's?
@dennyarcano24707 жыл бұрын
which windows do you have? with the 10 i have still problems and lokks however different my trackto. is the last version
@djmoments12 жыл бұрын
Need to configure cdj350 to TRACKTOR LE PLs Help.
@thebrassavolas12 жыл бұрын
my question is how did you connect ... the cdj-s to the pc and to the mixer.. my guess is that you used a TA6? or just the usb cable from cdj to pc is needed? how does that works with an external mixer?
@DJRic198312 жыл бұрын
@giwrgosomo it will not give you the song names on the CDJ because native instuments have not made traktor support the HID on the 350, it only runs midi, so until native instruments change this there is nothing you can do
@WJReviews12 жыл бұрын
good point lol no wonder theres no usb coming out of the mixer, ric i have a question, what dj setup do you have now?
@WJReviews13 жыл бұрын
@DJRic1983 no worries champ i just had to reformat my usb =D
@JacksonFernandoDJ11 жыл бұрын
I use a Mac.. and I follow your setup to the T... but I just have one problem... why does the scratch-ing doesn't work?... the jog only work for wiggle-ing the pitch!... not for SCRATCH-ing!!.. what should I do??... please reply thank you...
@DeeJaySens311 жыл бұрын
I have a DJM-350 mixer & a Traktor Audio 2.What are the steps to connect my mixer with traktor 2 program.?I connected everything right,incl. the soundcard & everything ,but I can't use my mixer with traktor.Help please.
@CollosalTrollge10 жыл бұрын
I will try to play with my CDJ400 tomorrow and connect the USB printer cables from the Pioneer CDJ400 to the 2 Computer USB ports. I will then start Traktor. I will get back to you when i am I am going to try the next step. I would assume that i need to plug in my DJ Mixer output to the Line-In / microphone (where my ipod nano 4 was) ?
@CODE-rp4uc8 жыл бұрын
will this work with CDJ850's?
@MFthesupervillain111 жыл бұрын
Got a wierd problem. I get everything to work. BUt the play/pause button does nothing. I can only listen to tracks when I press the cue button. What am I doing wrong?
@DJRic198311 жыл бұрын
the lights on the cdj have nothing to do with the vinyl mode on traktor, and if you switch it on on one deck it activates on both so by turning it on, using both decks you are affectively turning it off again, so try pressing the vinyl mode on just one cdj and see if that works, if it doesn't work it could be use are not using traktor scratch
@ronanmchugh45711 жыл бұрын
thanks great video but im having one problem if anyone can help....... bith decks play fine but the vinyl or turn table wheel doesnt work as it should, its turning up and down the pitch instead of moving forward and back the track.....
@christelleoblet664511 жыл бұрын
Hi everyone, I follow the instructions to install the CDJ350 with my computer running under Windows vista, it is work as well. I just buy a new computer running under Windows7. After installing the settings, I can't control the CDJ350, the CTRL led doesn,t work. What is wrong? thanks for answering
@LirasCollective11 жыл бұрын
Where i can download the tracktor pro ?
@hendrik94tv10 жыл бұрын
is also the trackID or artist name or BPM in your CDJ`s display visible?
@j0nl1st0rp311 жыл бұрын
I followed every step you took, but I had a few problems. One of the decks played fine and everything, but the other was unnable to do nothing, i tried to change the usb ports and cables but it is not that.. The other 2 little problems were that I dont have that options on the output routing, i just had "1: hd audio output 1 ; 2:hd audio output 2 ..."" and in audio divice(audio set up) i just have asio4all v2, pioneer cdj asio and another pioneer asio 350 "something", please help me!!
@jaspperdavicho8 жыл бұрын
me podrias pasar el driver por favor ?
@djajayayyer60724 жыл бұрын
Can we record???
@cidcerqueira63948 жыл бұрын
+djric1983 I followed all your instructions, but the soun isn't going out on the mixer ou headphones =(
@WJReviews13 жыл бұрын
i have a problem with my playlist button my cdj 350 when i press it nothing shows up help me out richard thanks =D
@WJReviews13 жыл бұрын
@DJRic1983 and update my collection again =D all good now playlist button on the cdj 350 is up and going =D
@thomasacid646710 жыл бұрын
Tnx for the turorial but I have a problem , when i click play/pause in the cdj 350 (and the song is load into traktor) the song didn't start! why ? help me pls
@CollosalTrollge10 жыл бұрын
HI, i have upgraded to a Dual core CPU so i hope to try this properly now. I have bought printer USB cables. I have installed Windows XP 32 bit from fresh. Only Sound Blaster X-Fi drivers installed and Firefox and Flash 11 (not 13 ). I have installed the Pioneer software drivers. I am using 4/4.1 sound in my control panel in windows. I have pluged my Altec Lansing speakers to X-Fi output so i hear windows sounds and your you tube video for example. I have tried to plug my ipod as a test to my Line-In / Microphone , i am not sure what it is ..actually ... anyways, i hear the sound from the ipod nano 4 and I can hear it is playing to my output with my windows sounds. I hope this makes sense so far.
@DJRic198312 жыл бұрын
still the white CDJ and DJM 350
@todedragos8 жыл бұрын
hey mate !! whitch is better ? cdj 400 or cdj 350 ? i'm not interested in the effects of the 400's. Thanks :D
@DJRic19838 жыл бұрын
+Dragos Tode well the cdj350 does everything that the 400 do apart from light up and have the effects direct on the player, the 350's are recordbox players which is the new standard when it comes to CDJ's but i guess it comes down to personal preference
@killshot388810 жыл бұрын
can i do it with traktor 2? or do i have to buy traktor pro 2?
@killshot388810 жыл бұрын
i have the traktor LE 2 version
@DJRic198310 жыл бұрын
killshot3888 well because i only have traktor pro i couldnt be possitive but it should work
@DJRic198312 жыл бұрын
thats because your buffer needs to be increased
@DJRic198312 жыл бұрын
Lo siento, pero el Inglés no se traduce muy bien, estoy teniendo problemas para entender lo que quiere decir
@nitinnigam36766 жыл бұрын
Send me link 350 cdj player driver
@WJReviews12 жыл бұрын
Ric have you bought youself a laptop stand that clamps onto your road case? I purchased one today and its on its way =D woohoo
@AyminnrDj11 жыл бұрын
Try to reload the CDJ350.TSI.
@DJRic198311 жыл бұрын
the DJM is not a midi mixer it can not be used with traktor
@DJRic198312 жыл бұрын
very simple you cant lol, there is no midi transfer, between the mixer and the software