Who else failed no nut november when the bracket fit perfect

you need a CR500 to fill out the family

Definitely picking this up for the cr250 build! You're the man Cam

I like how CLEAN it looks. I need to clean up the look of mine.

I just used zip ties for my number plate lol. It's a 17' front end conversion on a 2000 CR. I didn't have access to anything to make a bracket at the time but the zip ties work quite well. Nice & tight & no vibration. Glad to see you make legit brackets for it. I'll have to pick one up sometime.

PRYME Thanks for the great videos! I’m excited to get my updated front end on my cr250 thanks to your bracket and mounting template! Much appreciated!

Thanks for making this video. I really appreciate your efforts. I have the 2003 cr125r. I have been building it for some time now. Finally wrapping it up and your videos have helped me alot with my build especially the suspension vids.

This bike is sooo nice. I'd love to have a CR125 all built like this one day.

I like more the original style, I think it goes better with the rest of the bike, but nice video Cam

This is happening! Been looking for a way to freshen up my bike for ages! Great stuff as always cam

Already know it’s gonna be a good video! Can’t wait to transform my yz with a restyle kit

Man I love how the bracket uses the raised boss on the triple clamp just like the stock #plate. That is a very well engineered part. The details are where its at Cameron. PRYME STUFF MAN.

PRYME BABY! Havent ordered yet but I've ordered the polish pads and stickers before. You always take time to reply to my questions which has helped me massively on my Cr build here in england. Respect bro

Hi Cameron, let me fill you in on some metal machinist trade skill to improve finish and accuracy. When drilling any sized hole, never drill up in gradual increments to a finish size. Look down on the cutting face of your drill bit, the central plane between the 2 cutting faces is called the chisel edge. Say for example your drill bit is M12. Measure with a rule the width of the chisel, it maybe 1.5mm in width. A pilot drill (a guide drill run through the material) should be no greater in diameter than 90% or 9/10th of that chisel edge width. So for a 1.5mm chisel edge the pilot drill should be 1.35mm (you would therefore use a 1.2 - 1.4mm drill). Drill pilot hole first. After the pilot you go straight to size. Alternatively, you can simply use the chisel edge as a gauge and select a pilot drill undersize to width of chisel edge, near enough is good enough so long as undersized. In your case I understand the plastic may bite, however, just some knowledge you may find usefull otherwise. Appreciate the quality of your work. Cheers from a 53yr old Australian machinist and bike enthusiast. Keep it up, love your work!

keepin it PRYME buddy 👌🏼 I ordered my bracket a little while ago, but I’ll put in another order if you end up picking my comment 😉 lol bike looks super fresh. Hell, all the bikes you have do. Keep on putting out awesome content!

Pryme Going on the 05 CR 250 if all goes well. Nice video! Very instructional as always. One of my favorites so far was when you shaped up the track with the dozer. Those are dreams right there!

Bloody legend cam, cheers. Keep up the awesome work

Pryme! Love the videos man. Been watching them for YEARS now lol

Just recieved the bracket for my 03 cr250. Fit perfectly and I went with the acerbis raptor plate. Waiting on the front fender and hoping all lines up good. Thanks Cam!!

I have a 2007 kx450f and I put a 2017 front fender and number plate. All I had to do was put a small nut and bolt coming through so that the number plate had something to fit itself onto it just slid on to the screws sticking up and everything else just lined right up I only had to purchase the four newer bolts with built on flanges they lined right up.

Hey cam sal from Canada you helped me over the phone with my fender mounting love the videos! Keep it PRYME!!!!!

Thank for the PRYME insight. I have a 01 cr125 had the cylinder done and new head. All your videos are really helpful. Thanks 63v

Thank you for sharing 👍

Pryme deffenetly want to restile my cr125 now🔥, keep up the good work!

Pryme Loves the vids man

So PRYME!! man it looks gooooooood!!! I need to do that to my 125🤤

Pryme Just ordered mine for my 04 crf450 been wanting to swap out the fender for awhile thanks for making a video about this

Such a huge difference, but i did it with 2015 Fender and Plates.....looks amazing with custom graphics

Another awesome video, keep it up Cam. 🤙🤙

I bought the same restyle fender as u but have a cr 125 01 and done the same as u said but the fender points down and dosent sit like yours

Bikes are looking good , looking PRYME . Keep making updates for the older bikes 😄. I love my 2001 cr 250's but the plastics were looking dated , this will help !

Great video as usual, Thanks !

PRYME I have an 07 cr125 I’ve been spending the past few months to return it to its former glory and this would certainly help. Love the look of that stadium plate so much haha

Great video and thanks for sharing!

Nice bracket! It looks slick. That pointy screw driver is called a scratch awl. Was used for making a hole in wood so you can start a screw or scratching a mark on something. Sometimes called a screw awl.

That looks unreal

Hey Cameron can you explain me or do a vídeo of how did you cut the rear plástics in your ole 125? I realy want to doit

More uploads pls 😂 love the vids

Thank you so much for this video! Now my 01 CR250 can look like it rolled off the showroom floor yesterday!

Pryme looks like a sweet set-up

Nice upload dude!

🔥 as always

Just did something similar to my yzf. It looks so clean

So glad i subbed great content

Pryme Love your videos man they really entertain me

Nice, I have an old crf 450 2003 that could be doing with a makeover would be nice to no what I could buy to make it look newer 👍

Nice work!!!!

PRYME i would live those plastics they would look great on my CR and make it look amazing again.

Pryme Looks amazing!!

I have a CR125 2001 love it I’m putting a CRF450 front number board and front mudguard on it 😁 can u change anything about the rear mudguard??? 😮

do they do anything if you prefer older style? have an 01 cr250r love 96s, obviously I know the frame change, but I think you might know what I mean.

Pryme My brother has a 01 cr125 so that would look sweet on his bike 👍🏽

How do I install a 2002 restyle plastic to a 2001 CR250.is it possible?

Pryme, loves the vids Cameron!

Do you have a video on how you trimmed your number plates? Nice conversion looks great

Will the 2020 crf 450 plastic kit bolt on to a 99 cr 250? There’s a company that sells them but they are way out of the price range

Pryme Even though I don't have any honda bike, i'd be happy to have one so there's a reason for honda bike to build up in my life! You're the best Cameron! Your vids entertains me so badly! Hehe #KeepItPryme!!

Pryme.. awesome videos man! Keep them coming!

Pretty sweet brackets. Wish i had a 2 stroke, still kickin my 4stroke 250. By the way if you remember my last comment, we finally got the 99 xr100 running, new petcock, carb clean & rebuild , few other things kicks first go!

I have a 2004 CRF250r and they don't offer a restyle for it. I would prefer getting a kit but thinking on trimming the back plates so would love to see a video on going about it!

Pryme Bikes are looking rad man🤙🏽 I just got into motocross this year and Im absolutely lovimg it

would this bracket work on a crf250r 2008?

brilliant

Sick video!! You should Cut the back number plates, ur old 125 looked slimmer with them that way 🤙🏼🤙🏼

fits from parts honda crf 150? Model year 2012

Does this work on a crf250r 2007?

PRYME That bikes lookin good. Keep up the vids

anyone know about a cr80r mines 02 want 2010 front fenders?

PRYME KEEP IT UP!!

As always Dude Awesome Vid 🤙

what do you think about a yz 125 2004 for $1500 decent condition? would you buy it as a first build bike?

Pryme Love the vids man!

what graphics kit is that

Pryme!! Love the bike so cool!

I have a 1995 cr125 I wanna make it look new is that possible

Será que consigo adaptar na cr 250 98 ?

Pryme! Just ordered my front plate bracket for my 02 CR250. Super stoked!

Pryme But I can’t order anything because I’m to young to have a credit card but I just saved up and bought and 07 crf 250 r and the front plastics are thrashed so I would love to win this give away it would be so awesome. Glad your healthy again Great vid love the content.👍

PRYME! BRAVO..its my dream BIKE!!!!

Pryme Awesome meticulous video. Will these updates work for a CRF125F?? Thanks

Pryme hey Cameron your channel is the best i only found it a week ago and already watched have of your video i wish one day i could have the skill and do the things that you do. all the best for your marriage as well you awesome

Whoaa nice bike!!!

Pryme Thank you for the video!

Pryme, nice video as always🙌

can i do this to my 06 crf450r?

Pryme mate your bike looks sick as

Pryme - Awesome videos Cameron - keep it up!

Pryme Keep up the good work Cam!

Hello friend, can I apply it in CR 01 250?

Pryme mx man. I need those parts for my 07 crf. Nice vid bro

I have put a front fender and number plate of Honda CR 2018 in my Kawasaki KLX 150 big whell Indonesian version. Even it a different brand but it still awesome.😀😀😀

Muito legal gostei muito ,sou apaixonado por cr

Got a 2000 cr250 I would love that fender for. PRYME!

PRYME Have a Honda cr 125 2005 myself and would love to have that updated look

Pryme Love your videos

Pryme!! Looking good buddy. Could use that kit for my 05 CR125 build!!

Chill bro ♥️🤘

Pryme, great video

Very good motocycle Honda CR Poland waching Your videos

I'm ready for you to do a full restore of a crf450r. DO IT!