Рет қаралды 73,726
On the Land Rover LR3, over a period of time, the clutches wear and that material builds up into the filter and into the fluid itself.
That all reduces the efficiency of the transmission.
It creates more heat, and heat is the worst enemy for an automatic transmission.
Watch Doug, our Land Rover Master Technician, give an overview the process involved in replacing the transmission filter for a 2005-2009 LR3.
Using money-saving kit # TRANSM100SKA, which comes with 6 liters of ZF Lifeguard transmission fluid, transmission filter with gasket and pan, filter plug,and an automatic transmission valve sleeve.
It is recommended that this service be performed every 90,000 miles.
Please Note: While part number LR007474, is used on Range Rover Full Size models, the process for this service differs from LR3 to Range Rover Full Size.
Please note that there are parts mentioned in the video not included in the kit that you may want to replace for the service, those part #s are exhaust gasket #WCM100460L and # TYP500050 pan bolts (21 required).
0:34 Recommended service every 90,000
0:49 Included in kit
1:54 Location of pan, gaining access
2:27 Remove cat to remove pan
3:37 Jack stand under transfer case
4:28 Option to upgrade to 40 Torx bolts
5:08 Raise back of transmission to clear pickup tube on pan
5:37 Remove 21 bolts and drop the pan
5:47 Reinstall everything taken apart in reverse order
6:42 Procedure to refill the system
7:05 3 to 5 quarts of fluid
7:47 Once a second drip
8:04 Fill plug location
8:59 Ordering information
Related Parts List:
TRANSM100SKA
www.roverparts...
LR007474
www.roverparts...
TYP500050 (21 required)
www.roverparts...
WCM100460L
www.roverparts...
Questions about this video? Call us at 1-800-533-2210. For more how-to videos focused on the Land Rover and other Rover vehicles visit www.roverparts...
#atlanticbritish #transmission #landroverlr3