Dirt Bike Tech Tips/How-To: Replace WP Fork & Shock Springs on a KTM

Рет қаралды 25,905

3 жыл бұрын

Modern bikes are excellent straight out of the box, but manufacturers can't make a perfect suspension setting for the wide range of riders that buy a new machine. If you are below or above the '75-80kg sweet spot' in weight, changing the fork and shock spring for your weight is crucial to getting your bike handling its best out on the trail or track.
Learn the tips and tricks of the trade with KTM Australia Race Technician, Mick Carusi.
Here's the video breakdown:
⚙️ Why it's important to have the correct spring rate - 0:01
⚙️ Tools needed - 1:46
⚙️ Removing the forks from the bike - 2:35
⚙️ Removing the fork spring - 6:45
⚙️ Measuring the fork spring length - 8:39
⚙️ Installing the new fork spring - 9:39
⚙️ Re-installing the forks in the bike - 12:03
⚙️ Removing the shock from the bike - 17:17
⚙️ Removing the shock spring - 18:18
⚙️ Installing the new shock spring - 20:41
⚙️ Re-installing the shock in the bike - 21:44
To learn how to set static and rider sag, check out this tutorial: • Dirt Bike Tech Tips/Ho...

Пікірлер: 8

@Bebito21pa 2 жыл бұрын

Awesome

@robwal3665 Жыл бұрын

Hey, on the KTM book (exc-f) it only mentions heavier fork springs if needed, do you need lighter springs on the forks if you go with the next spring lighter on the shock ? Or will you get away with it.

@jeffestrada6857 3 жыл бұрын

Hi where are you located? What is the name of the business and city/state are you in? Thanks Jeff ( Melbourne Victoria)

@rafy600 3 жыл бұрын

Why measure the shock length .

@shogun678 3 жыл бұрын

He's measuring the pre load

@myszapm 2 жыл бұрын

@@shogun678 Yes. But on the other spring the sag was diferent . This measurent has no big sens. Sag need to set

@shogun678 2 жыл бұрын

@@myszapm it will get you close though

@The00MOFO Жыл бұрын

@@myszapm each spring rate works best with a set amount of preload on the spring, think 8mm. so as you change the spring rate that 8mm preload equates to different sag measurements. if you're 89kg trying to get the correct rider sag with a stock spring you'd have to wind so much preload on the spring the valving would no longer be able to dampen correctly.