Transparent LCD Side Panel Tutorial (Snowblind) linktr.ee/al.hd wiring diagram for LCD Display controller and 12V LED Strip drive.google.c...
Пікірлер: 68
@AL-Tech8 ай бұрын
list of all the wallpapers I used: Ink Drops 1080p 60FPS black and white optical illusion Black and white kaleidoscope 4k 60 fps smooth Ink Drop in Water - Black 001 Glitch Clock Black and white audio visualizer 翻页钟 Flip Clock GutzyAiden Inspired wallpapers (black/white) black on white samurai BlxxdY Clock Abstract Purple Topographic Abstract White Topographic Tinsley Black and White Spiral Swirl (Optical Illusion) Tinsley Twisted Black and White Spiral Swirl (Optical Illusion) Roby Black and White clean 黒煙 black smoke 6z White and Black Topo disco_calle topograph gray and white with clock Reflex Psychedelic Black and White
@kinginanorth7 ай бұрын
Yeah, I did this 4 years ago and have since completed many of them perfecting it every time completed. This video was from my first prototype build. Completed with various cases. It's honestly not difficult as long as you spend sometime researching the parts required. kzfaq.info/get/bejne/gJp_fayQ3bWvdZc.html
@X862go7 ай бұрын
nice i am about to build in a snowblind
@HanmaHeiro6 ай бұрын
You're tutorial is the best resource I've found on KZfaq. Thank you for the USB idea and the wiring diagram. I wish you luck on your social media adventure!
@UnknownreelMachine7 ай бұрын
Did this with the same Monitor Model and it worked just fine. One Problem i faced was that the Display wasn't turned on when i connected it first via Molex. After i connected the buttons to the controller and pressed the power button once it worked just fine. Thanks for the tutorial and the monitor recommendation man.
@AL-Tech7 ай бұрын
Happy to hear that 😃. Regarding the buttons, I think once you turn on the monitor the first time, you won't need them anymore. Because when you cut off the power from the monitor ""PC is off; no more power"" then once you turn on the PC the monitor will come back to the last status it was on.
@m1stakenazn9 ай бұрын
This is awesome. Wish this was purchasable. Great job!!
@Atreyuwu2 ай бұрын
it is. There is a PC case by iBuyPower called 'Snowblind'. The unfortunate thing is that the build quality sucks (according to reviews) so this is probably a better way to do it lol.
@GabrielDiasCanal8 ай бұрын
Man, you save me, I was confusing about 5V and imagem that usb could work with it. WOW! That is Awesome! 🤯
@BooolZay9 ай бұрын
Bro idk if you thought of it it’s a great business idea given how PC building is blooming and has been id defo buy something like this at a reasonable price
@darekzmarek18428 ай бұрын
me to :D
@madjoemak5 ай бұрын
Very good tutorial. I watched it after already completing my build and I have nothing to add to this, other than maybe you should explain a bit better how to work out which wires you need to apply 5V to. Also, I didn't think of painting the controller board white, I might do that as well
@User-ec2bh6 ай бұрын
Quick tip: When you turn your phone 90° while filming your videos won't look like shit.
@AL-Tech6 ай бұрын
I know man 😣 I was always against vertical filming. Unfortunately this video was made for TikTok
@rknine79989 ай бұрын
Good job. You can make business out of this.
@oorgasmatron179 ай бұрын
Great Job Man!
@RavenValkyrie9 ай бұрын
Tha't very cool!
@farmageddon29782 ай бұрын
my pc glass looks completely invisible. Its crazy. For the latest Lian li case
@Tekka5796 ай бұрын
I was all in until I had to do electrical work. I might die!!!
@user-is5rn5bw5j28 күн бұрын
can you play colored wallpapers on this or only black-white?
@saladbetch82358 ай бұрын
very helpful 🥰
@X862go7 ай бұрын
thanks
@zitronenlolli18 ай бұрын
Is it possible to clean it, maybe even with a wet wipe?
@AL-Tech8 ай бұрын
Yes, also the screen is on the other side of the side panel glass
@mxmercury_36537 ай бұрын
Hello, May I ask where I can find the temperature indicator with the time located at 0:42. Please could someone send me a link where I can download it.
@AL-Tech7 ай бұрын
So that wasn't a temperature indicator, that's the "iBUYPOWER Snowblind Meters" link in the description. If you are looking for a temperature indicator I recommend NZXT CAM with a white theme. Link also in the description
@daltondcruz98557 ай бұрын
What liquid is used to remove the layer ?
@AL-Tech7 ай бұрын
Water!
@LikelyLagging7 ай бұрын
Anyone following this BE CAREFUL fucking around with power supplies even when unplugged as they can potentially store dangerous amounts of electricity.
@AL-Tech7 ай бұрын
That's why the warning at 4:17 👍
@mikelascelle29212 ай бұрын
How much did it cost to make
@tims98755 ай бұрын
Please,i need Help. I remove the layer on the Front and i see nothing. With layer it works. But than is not transparent
@AL-Tech5 ай бұрын
You just removed the polarising layer. Sorry there's no fixing that.
@teinteinn48299 ай бұрын
What wallpaper's do you use, i was only able to find some of them. Really like the ones with the time.
@AL-Tech8 ай бұрын
Just pined a comment. Check it out 👍
@JSantos8096 ай бұрын
For the USB connection....Am I using the green and white wires at all? or just the red and black ?
@AL-Tech6 ай бұрын
Just red and black
@rafaelkurazh39805 ай бұрын
Where did you connect the 12v?
@lukasvobr72248 ай бұрын
hello, I would like to ask how you found out which side the anti glare foil is from, because I did it with 2 monitors and I always tore off the polarizing layer. Thank you in advance for your reply.
@AL-Tech8 ай бұрын
You just look at it under a light. If it's matt or non-reflective, then it's anti glare layer. But if it is reflective or shiny then don't peel it off
@lukasvobr72248 ай бұрын
@@AL-Techthanks
@lukasvobr72248 ай бұрын
@@AL-Tech And I would also like to ask about the power supply, I bought a new dell 190Sb monitor and I don't know how exactly to supply the power, I read it from the board. to which pins should I put 5 volts and gnd 1/ - 2/- 3/5V port 4/5V port 5/ gnd 6/ gnd 7/ 5V usb 8/ 5V usb 9/ gnd 10/ gnd 11/ 3V 12/ gnd 13/- 14/-
@AL-Tech8 ай бұрын
Yes 5V to evry pin where you measured 5 volts. And "- to GND" . Flip the board on the other side usually there is writing nearby the pins to indicate which is 5v GND etc. See the wiring photo in the description
@lukasvobr72248 ай бұрын
@@AL-Tech I have to connect all the 5V pins to one cable that goes to the 5V molex cable (I connect 4 pins to one) and I have to connect all the gnd pins to one cable and connect it to the molex gnd. Did I understand this correctly?
@rafaelkurazh39805 ай бұрын
I connected the 12v wires to the 12v molex and my controller stopped working
@AL-Tech5 ай бұрын
Display controller? It should work only with 5V i was clear on that. The 12V is for the LED strip
@rafaelkurazh39805 ай бұрын
@@AL-Tech then why didn't I cut the 12v wires coming from the controller? They don't power anything.
@Glorious_Yell0w7 ай бұрын
Are u located in sweden?
@AL-Tech7 ай бұрын
No, Germany
@Dyrewolf_15 ай бұрын
how is the lcd panel connected to the gpu. is there a cord running from inside the tower to the exterior and plugged into a display port or is the wiring all internal ?
@AL-Tech5 ай бұрын
Yes, the VGA cable is running from inside the tower to the graphics card in the back. Then into an HDMI adapter.
@JSantos8096 ай бұрын
Can i use an LG Flatron L1952TX monitor?? idk what the difference is from the L1919s you used in the video. I cant find one of those anywhere
@AL-Tech6 ай бұрын
Yes you can. I only recommend that model because we don't know each exact model what kind of ribbon cables inside them are.
@JSantos8096 ай бұрын
@@AL-Tech Thanks im ordering it off of ebay and will follow your steps. awesome video.
@harabekowalski37008 ай бұрын
Hi I’m doing this from yours tutorial and I don’t know how to connect controller to usb, I measured my pins, and it’s look like this 1.0V 2.0V 3.0V 4.0V 5.0V 6.0V 7.5V 8.5V 9.3.28V 10.3.28V I connected 9 & 10 to black wire and 7,8 to red wire. My lcd connecting it like this is not working Can you tell me if I’m doing something wrong
@AL-Tech8 ай бұрын
7+8 +5v GND you need to find on the controller. Or look at the controller PCP ir should be writing on the back of the PCP
@harabekowalski37008 ай бұрын
@@AL-Tech how to find them if there is nothing written on the PCB except some strange string of characters like TP36
@AL-Tech8 ай бұрын
Connect GND to a screw hole. There is usually conductive circle around the screw hole for ground.
@kadirkorkmaz11077 ай бұрын
Hello friend, I am looking for the same image as in 45 seconds, but I cannot find it. Can you help me? I also want to see the values of the graphics card processor and motherboard.
@AL-Tech7 ай бұрын
Link in description
@kadirkorkmaz11077 ай бұрын
@@AL-Tech Yes, you say it in the description, but it's not there, can you post the link here?
@kadirkorkmaz11077 ай бұрын
@@AL-Tech There is only a schematic in the link
@AL-Tech7 ай бұрын
@@kadirkorkmaz1107 link updated
@musetex52674 ай бұрын
Your KZfaq are really impressive! We have been among the top 10 best-selling PC Cases on Amazon for quite some time now. Currently, we are actively searching for influencers to create content showcasing our PC cases. Please respond promptly if you are interested. Thank you!
@Mordix6667 ай бұрын
Hello, very cool project! I want to connect wires to usb for power, I see in 5:17 that you "merged" four wires into two wires for usb so 2x5v and 2x grounded into 1x5v?(or 10v?) and 1xgrounded, correct? So I should soldering them right? Sorry I never did something like this, and this is like black magic for me ;) Maybe you can recommend some tutorial for this?
@AL-Tech7 ай бұрын
No 10V. Your just passing 5V to 2 different wires that's all. Same for the GND ground