Travel In Silence?! Building The Hyte Revolt 3 | Noctua Air Cooled Gaming / Editing PC Build

Рет қаралды 83,103

2 жыл бұрын

Introducing my latest build in the HYTE Revolt 3!
For this build I really wanted to aim for a minimalist, yet very capable silent editing pc, with light gaming in mind too! Needless to say, the combination of the Revolt 3's incredible airflow combined with the select Noctua components kept this build silent, with plenty of moving air to prevent overheating under heavy load. Sure, I could’ve easily added an AIO, but having seen this done extensively with the Revolt 3, I decided to try something a little different with the air cooling setup.
Near the end of the build sequence you will notice that I had the mic practically touching the PC to get an audio file of the sound. It was almost impossible to hear it! Hats off as always to the guys at Noctua for producing such incredibly quiet fans!
With this being my first build in the Revolt 3, you bet that I'm excited about the idea of custom loop water cooling this later down the lines too!
Main parts included:
(USA Amazon)
Case - HYTE Revolt 3 - amzn.to/3Asdvl8
GPU - MSI RTX 3070 ti Gaming Trio OC - amzn.to/3uqh07v
CPU - AMD Ryzen 5 5600X - amzn.to/3yFBYSC
Motherboard - ASUS ROG STRIX X570-i - amzn.to/3nCO34H
RAM - Kingston Fury 32GB 3600mhz - amzn.to/3adtIQa
CPU Cooler - NH-L9a AM4 - amzn.to/3uoYfS5
Fans - Noctua NF-A14 PWM - amzn.to/3yidygr
PSU - HYTE Revolt 3 built in 700w (iBuypower) -
Main parts included:
(UK Amazon)
Case - HYTE Revolt 3 - amzn.to/3bUIoV7
GPU - MSI RTX 3070 ti Gaming Trio OC - amzn.to/3yJIfMQ
CPU - AMD Ryzen 5 5600X - amzn.to/3yI3C1j
Motherboard - ASUS ROG STRIX X570-i - amzn.to/3yfyaWB
RAM - Kingston Fury 32GB 3600mhz - amzn.to/3RaXZQp
CPU Cooler - NH-L9a AM4 - amzn.to/3bL5BJ7
Fans - Noctua NF-A14 PWM - amzn.to/3IhujwX
PSU - HYTE Revolt 3 built in 700w (iBuypower)
I'd just like to say a huge thank you to HYTE for sponsoring this build. A thoroughly enjoyable SFF build with great potential, I also hope the different approach is well received!
Link to the HYTE REVOLT 3:
hyte.com/store/revolt-3/
Link to the HYTE Eclipse HG10 headset featured:
hyte.com/store/hg10/
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
Find me on Instagram:
/ mr_matt_lee

Пікірлер: 102

@hytebrand 2 жыл бұрын

Such a relaxing build video. Loved it 💛

@Mr_Matt_Lee 2 жыл бұрын

Thank you 💛 So pleased you enjoyed it 😁 Really looking forward to seeing more from HYTE.

@ahmadsultankadir1 Жыл бұрын

@@Mr_Matt_Lee Did put high to volume sound in 3:56 i try listen how much sounds in there rig then 4:06 scary me too loud music 🙃

@ELWBB Жыл бұрын

FINALLY someone that build this case without an AIO. Thanks for making this build.

@pehenry Жыл бұрын

Dude. I totally appreciate the no nonsense build build and video. No crappy intro. No yapping just to yap. Well done.

@QuB3 2 жыл бұрын

Damn, this channel is gonna grow for sure! Keep it up Matt :)

@boydolson5350 Жыл бұрын

Okay future tip for video production. Dont have a sound test where viewers need to turn up their sound to hear and then blast some loud music at the end of it.

@datmaafahka2641 Жыл бұрын

Shut up

@datmaafahka2641 Жыл бұрын

@@boydolson5350 wahhh 😭 I’m getting mad over a comment. Al I just told you is to shut up go get some help baby 🤣 sounds like u have anger issue buddy

@waldokitty3533 Жыл бұрын

Classic troll. Made me laugh actually

@boydolson5350 Жыл бұрын

@@waldokitty3533 4:02 tell me thats not annoying

@waldokitty3533 Жыл бұрын

@@boydolson5350 oh it's something. If I had a kid sleeping and it was on speaker, I'd be annoyed rather than amused. But it was so loud after I cranked the volume to hear the fan, I can only imagine it was an intentional troll after having been a chill video the whole time. I'm sure most people hate the guy for it, and for understandable reason; I just thought it was funny.

@badoidoy8306 2 жыл бұрын

These videos are sick! Awesome job man

@jasonr4630 2 жыл бұрын

Love the video, great production and music selection, I was already planning the build and you used most of the parts I was already planning on buying. Interestingly enough I was planning on a SFF water cooled but after seeing the acoustics portion of your build I changed my mind and saved a bunch of money as sound levels were a primary focus in my build. Switched the Noctua 140s and the Noctua NF-A14 PWM out for the Chromax.black versions just for my aesthetics. Just wanted to say thank you for the great video, watched it like 4 times getting all pumped for my new build, mostly because I liked the music :D

@dickaldor 11 ай бұрын

Ah smooth transitions on the video, great work! Looking into an mITX case to put my computer in (getting new mb, cpu and ram) and this is one of the cases I´m considering. Thanks for making this video!

@tobydude7462 2 жыл бұрын

Perfection, I'm getting this case

@andrewcool. 2 жыл бұрын

Powerful video, buddy 🔥🔥🔥 Very atmospheric 🖤🖤🖤

@Mr_Matt_Lee 2 жыл бұрын

Thanks buddy, so pleased you enjoyed it 😁🤜🤛

@Aeterna_Soul Жыл бұрын

Amazing. Thank you!

@shahriartushar9015 2 жыл бұрын

Awesome build ☺️ love it 😍🥰

@tytyguy1able Жыл бұрын

I always find the cool cases after I finish a build

@thevegastan Ай бұрын

SUBBED IMMEDIATELY AS THIS WAS THE BUILD I'M TARGETTING TO BOOK BY END OF THE YEAR!!

@markdavenportjr5129 Жыл бұрын

Very cool I'm gonna be upgrading to a 12600k soon and upgrading from stock ibuypower parts to this case and power supply cant wait to do that since it will be super fun. :)

@junglejim5678 Жыл бұрын

You should call this build, "Leroy Brown", because it is Badass!!

@psx1986 10 ай бұрын

Bad ass build and music, you just inspired me to build a mini itx with a ryzen 9 5900x & 4070ti 😅

@bloodofthefayth 8 ай бұрын

props for noctua, would look great with one of the noctua partner cards

@jibinbaby5030 Жыл бұрын

You're the content creator ⚡

@Finlandiamall 2 жыл бұрын

nice work.

@tonycastellanos5907 Жыл бұрын

Great video!! I was wondering, would it make sense to put a very small fan on top to use as exhaust??

@josestechcorner 2 ай бұрын

I have this case I just noticed that you could have popped off the front panel instead of unscrewing it, unless you had a pre production model. Love the build, Matt. I managed to squeeze the 7800XT Nitro + Sapphire card in mine.

@starrystarry9027 2 жыл бұрын

Where can I buy the black pad that covers the desk?

@dv2045 Жыл бұрын

the psu shroud is removable? a few centimeters can be gained to plce a vertical flat reservoir

@etmargallo Жыл бұрын

pretty nice, case, didnt know it had the hideaway handle and pull out for headphones, thats cool

@ArdyneusTheGod Жыл бұрын

I built my first PC with this case in August. I used the Noctua NH-C14s for the CPU cooler. Probably one of the biggest coolers you can fit in the HYTE Revolt 3. It's doing great so far. Anyways, this video is awesome.

@SomeoneElseInTheComments Жыл бұрын

How did you fit it? I'm currently building mine with that exact setup and if I orient the heat pipe end toward the GPU, the radiator sticks out of the case. If I orient the heat pipes away from the GPU, the radiator sticks out to where my GPU won't fit. I haven't tried either of the other directions as I'm pretty sure those directions won't fit either.

@ArdyneusTheGod Жыл бұрын

@@SomeoneElseInTheComments You can rotate the heatpipes towards or away from the ram. I recommend the heatpipes facing the RAM. This is because the cooler is not centered, so other orientations will cause size problems. I didn’t mention that I placed the fan on top, because the total height of the cooler is exactly the max height for the HYTE Revolt 3. Based on your comment, it seems you may be using a Intel cpu, which has the ability to be mounted in all four 90° directions. AMD mounting only allows two orientations, which are 180° of each other. If you still don’t understand, I recommend watching my PC build video on my channel. Just make sure to mount the NH-C14s in the opposite way that’s shown in the video. I later realized it was just slightly too wide for the back panel to close fully.

@Noodlepunk Жыл бұрын

Do you feel it would be a good travel pc? I want to do some Lan parties I was looking at this one or the Phantek Air 2.

@ArdyneusTheGod Жыл бұрын

@@Noodlepunk Yeah, I think the HYTE Revolt 3 would be great for travel. That’s what it was meant to do. Since it has a handle and can support more than the Phanteks evolv shift 2 air, It’s a great option.

@dagreekratking4694 Жыл бұрын

anyone figure out how to slam in 2 top exhaust fans? Havent done it but a 80mm overlaps the other 80mm fan spot so does 70mm work or what works for 2 up top?

@Inmysightstarget Жыл бұрын

where did you get that large mouse pad for your table it huge love to get one

@voidenterthehighlights Жыл бұрын

Just hours before watching this video, I ordered pretty much the same components lol. Would you recommend flipping the powersupply to exhaust? I intend to place the PC horizontally

@187RL 2 жыл бұрын

Hi, was it rlly only 69 and 65 degrees C under full load? If that’s true ima switch to this case with aircooling.

@MatthewPolack Жыл бұрын

Thanks for the video.. Great job.. looking for a compact audio production/gigging/editing portable PC. This looks like it could be a great option. Thanks!

@shalami2 Жыл бұрын

why did you opt for the L9a when the case can fit a larger cooler?

@Thertra70 11 ай бұрын

Fan were they all blowing out nothing pulling in? Just curious on the directional because those seemed like good thermals

@josephlim3869 Жыл бұрын

Wondering with this same case and cooling setup, will it work for Ryzen 5800x ? Have you tried it ?

@victorc1462 10 ай бұрын

great build, but I wish we had more passive cases. Right now we seem to only have monsterlabo "the first" it is also a vertical case but has no moving parts so zero maintenance and noise, and the temps are the same as this case.

@user-vn4ik2ny2u Жыл бұрын

cool! I want it >.

@hafidvloggs Жыл бұрын

goooood

@googleguy8188 Жыл бұрын

Great video but where is the exhaust? Is it don't really need it? How it works 😅

@CJ-vq9ro Жыл бұрын

How did you get those cooling numbers? I built same pc and i'm getting 96c on my processor. I even cleaned and reapplied my thermal paste thinking it was possibly that, but still running hot. And the fans are running loud.

@sinankaytaran842 Жыл бұрын

hello, good luck. It was successful. I want to ask you something. I bought the same case. My ryzen 5 5600 processor. Is the noctua cooling you use used in the 5600? can i catch the same heat values?

@dagreekratking4694 Жыл бұрын

using same but 2 fan 3060ti and a 5800x same cooler too just turned up to 90%

@ChaoticWrath Жыл бұрын

You have me strongly considering switching out my AIO for a dramatically improved venting setup...

@jonnyfontane3607 7 ай бұрын

Whats better for this case, air or water cooled CPU?

@milanbazelides 9 ай бұрын

2 intake fans vs CPU cooller? How are temperatures?

@ExiledYVM95 Жыл бұрын

wait, you didn't mention what what storage brand you used for this build.

@MauroBallG Жыл бұрын

Hello, amazing video production and great build showcase, congrats. Quick question, I'm about do a build on this case and all the other research I've done points me toward radiator liquid coolers instead of air like the Noctua you use here, so I'm a little concerned about it and I wanted to ask your opinion on it. Thank you!

@Dino-vl3lu 8 ай бұрын

El aire es mejor que el liquido , el liquido se evapora con el tiempo , las liquidas son recomendadas para cpu super potentes

@Turtlpeach2326 6 ай бұрын

Wait so what adapters do i need

@Ecko3351 Ай бұрын

Are those 2 140mm fans enough for this build? I have the same fans with a similar cpu coolers.

@blue9120 8 ай бұрын

I want a case like this only thing about it none of my parts would fit

@harryasilo8160 Жыл бұрын

did anyone try using noctua c14s in this case?, just wondering if doable

@lizard5109 Жыл бұрын

according to reddit it just fits and works

@AgentDenton2000 Жыл бұрын

Крутый👊

@axelrivas2914 10 ай бұрын

Can you use a Micro ATX motherboard in this case ?

@freudia 10 ай бұрын

Nope, m-ITX only.

@lucamorandell9977 2 жыл бұрын

Is in the Case Space for a hdd

@courtlandbrugger6770 2 жыл бұрын

Yes. It's right beside the power supply. You can fit a 3.5" hdd and there's also space somewhere else for 2 2.5" ssds or hdds.

@troymcfarland5767 Жыл бұрын

both of the pwm fans are intake right?

@pineapplej7310 Жыл бұрын

Yes you can see the side with no fan hub cage so it means they're pulling air into the case

@googleguy8188 Жыл бұрын

@@pineapplej7310but where is the exhaust? Is it really don't need it?

@pineapplej7310 Жыл бұрын

@@googleguy8188 not really, the case has plenty of space to exhaust air, and positive pressure is king!

@ohsnation1314 2 жыл бұрын

Hey question would you do a custom build?

@Mr_Matt_Lee 2 жыл бұрын

Hey there! Yes of course, I’ve done plenty of custom builds 😁

@darkvirus0776 2 жыл бұрын

@@Mr_Matt_Lee i want this build but with the noctua gpu as well for even more silence

@xsv-007 9 ай бұрын

savage

@tay7125 2 жыл бұрын

What kind of cpu cooler is that?

@Mr_Matt_Lee 2 жыл бұрын

Noctua NH-U12A chromax.black with NF-A12x25 PWM fans 😊

@troymcfarland5767 Жыл бұрын

@@Mr_Matt_Lee is it not the nh-l9?

@Mr_Matt_Lee Жыл бұрын

@@troymcfarland5767 yes, yes it is! It’s the NH-L9A 😶 I totally got my previous comment response confused with a different video.

@MrPancasona Жыл бұрын

👍👍👍😍😍😍🙏🙏🙏

@ahmadsultankadir1 Жыл бұрын

Better put on with Arctic Liquid Freezer II 280 with this rig

@Wolfreiser Жыл бұрын

I don’t think it would fit

@ahmadsultankadir1 Жыл бұрын

@@Wolfreiser Is work, i did check information and so.

@Azraenore Жыл бұрын

Me: Mom, I want a Xbox Mom: No son, we have a Xbox at home The Xbox at home:

@luongphuoc4592 2 жыл бұрын

Aio cooler will be better

@Ulieq 2 жыл бұрын

na, so much airflow no reason for aio

@sladesurfer 2 жыл бұрын

I think AIO marketing from the KZfaqrs got you brainwashed

@tobydude7462 2 жыл бұрын

@@sladesurfer Lol, word

@luongphuoc4592 2 жыл бұрын

@@sladesurfer i built fist PC when IntelGen4 :) , AIO is suck? Or something?

@DemiLovatosSpoon 2 жыл бұрын

Idk watch some videos with AIO CPU was 70+ The rad be taking up so much space causing air flow to be confined

@thomasdejonge3461 3 ай бұрын

Noctua makes such ugly stuff, but it works great :)