Protip the first thing I do when I work on my rc cars is take off the tires it makes the car easier to move around and is best to just get them out of the way that’s just from my experiences tho so do whatever makes you happy I guess, lovin the content tho keep it up
@RCKnockout3 жыл бұрын
Thanks for the tip. You’re probably right it would have been easier with the wheels and tires off. Thanks I’m glad you’re enjoying the content
@hotracinghelpdesk7243 Жыл бұрын
Excellent video friend, Great energy and honest chatter. I am always seeking good instructional videos for our customers and this one fits the bill. If you have any other HR videos, feel free to send me links. If they are helpful, I will likely send you viewers. Also, how about these parts? It's been some time, are they holding up?
@RCKnockout Жыл бұрын
Thank you! They are still holding up well! I do have install videos for the 32p gear conversion on the Slash 2wd as well as the Hot Racing Sway bar Kit on the Slash 2wd
@gumby7543 жыл бұрын
Center diff , spur gear ratio and shims. If you punch it from a dead stop often it’s impossible to prevent the gears from chewing up .
@RCKnockout3 жыл бұрын
Yeah the diffs that come stock aren’t very durable. These are better but I’m sure I could still strip these gears if I tried hard enough
@gumby7543 жыл бұрын
@@RCKnockout I forgot to mention, some can prolly contest. The bulkheads if you screw them down to tight it can make a space 2-6mm’s where the meet in the center on the bottom side . I believe this could cause left to right movement with the diff as you drive maybe aluminum bulkheads would help with not spreading apart like the softer plastic .
@RCKnockout3 жыл бұрын
@@gumby754 that’s true I don’t like the design with the screw holding the two bulkhead halves together
@Todd_G_FPV3 жыл бұрын
I shimmed my rear stock diff and never had a problem again on 3s but I loosened my slipper a bit
@everettjoseph64003 жыл бұрын
i guess I am kind of off topic but does anybody know a good place to stream newly released movies online ?
@arturoalfredo61653 жыл бұрын
@Everett Joseph i watch on FlixZone. Just search on google for it :)
@sebbbou54552 жыл бұрын
you meant the slipper on the diff you loosened a bit? And you shimmed only the rear one? Thanks for any more info!
@Todd_G_FPV2 жыл бұрын
@@sebbbou5455 slipper clutch is on the spur gear which is the gear next to the motor gear. And shimmed the rear diff only yes
@PLASMA_20052 жыл бұрын
Lol on 3s BIG BLOCK... they don't hold so good... tho my rear has been fine so far after replacement and bearings... tho my front is shot now... so getting one of these hr in the back stock in the front is what ima do lol
@earthling1984 Жыл бұрын
Do you run on 3S? My MERV is like 13 years old or so. Back when I first got it, I did replace the diffs once. After running a few runs on 3s and doing standing backflips and such. Since then I have basically just stuck to 2s. More than enough speed for the vehicle, and haven't had another diff break since.
@RCKnockout Жыл бұрын
Yeah I run 3s quite a bit of the time
@HeadBassVTEC4 ай бұрын
I run a "big block" 1406 castle motor and 3s most of the time in my mini and I am really not eating through diffs that much
@RCKnockout4 ай бұрын
That’s impressive…the stock diffs haven’t faired well for me
@anarochrc986 Жыл бұрын
I just bought this for my erevo 1/16th
@RCKnockout Жыл бұрын
Nice! They’ve held up well for me
@Widflyinghigh3 жыл бұрын
MERV Owner. Appreciate this video, I was wondering about those myself, for the price and all. Really glad your trying those. Look forward to seeing how they work out. I have not had any diff problems, and run 3S, but starting to jump a bit more, so anticipating the need.
@RCKnockout3 жыл бұрын
I still need to test them out. Hopefully they’ll be good considering how expensive they are 🤞
@Todd_G_FPV3 жыл бұрын
Shim the stock one and if that gets destroyed try these lol
@Todd_G_FPV3 жыл бұрын
Shimmed my stock one and its running strong on 3s
@Widflyinghigh3 жыл бұрын
@@Todd_G_FPV . Let me just ask this. I see lots of old posts for old MERVS saying shim the diffs. I have disassembled the disc several times, adding different fluids for different results. I'm just not having any diff problems. I don't see the need to shim the diffs. Everything in there fits well. I even bought the shims, but don't really want to put in them in there since everything seems to be working fine. Why do I need to shim the diffs in 2021? What symptoms need fixed that the shims will fix currently on newer models with newer bell housing? Just asking because you mentioned it. Thanks.
@Todd_G_FPV3 жыл бұрын
@@Widflyinghigh they will wear out faster without the shim but if its working fine don't mess with it lol I got my merv last year and it stripped running two nimh in series after a few runs. Got a new diff, shimmed it and now I run 3s on every run
@mikegrigarauskas91362 жыл бұрын
Its a great up grade just have to make sure to geta shim kit also or you'll just blow those also I have done it 2 times this will be the 3 hot racing dif I have to putting the front
@RCKnockout2 жыл бұрын
Yeah it’s a must do upgrade for the 1/16 vxl e revo for sure
@PLASMA_20052 жыл бұрын
When you fill the diffs your supposed to get rid of as much air as possible, I usually directly inject into slots etc. Or take a gear out to get underneath then put it back, I also find spinning the gears helps to move fluid underneath ALOT Also it is going to be hard to turn for the first bit but it's also a small shaft with little to hold too
@RCKnockout2 жыл бұрын
Thanks for the advice 👍😉
@gourobkundu21733 жыл бұрын
The e revo 2.0 is my dream rc car. I really want to have it.
@RCKnockout3 жыл бұрын
I haven’t heard a lot of buzz around it. From my understanding it’s not the most durable rig
@gourobkundu21733 жыл бұрын
@@RCKnockout Yes. Thats why i am in a dillema. Whether to get the maxx 4s or the e revo 2.0 Both are incredible cars, but i have a little bit of nostalgia with the revo. So there is an emotion. And rationally thinking, the maxx is a better option. Man, i am soo messed up and confused. Feel like getting both of them, but it will be highly out of budget. Anyways , both of them are pretty expensive.
@Todd_G_FPV3 жыл бұрын
@@gourobkundu2173 its your money just get what you think looks better. E revo 2.0 is actually pretty durable once u fix the rear rod ends or just don't beat the living crap out of it and itll be fine lol
@gourobkundu21733 жыл бұрын
@@Todd_G_FPV Yep. I generally donot try to murder my cars. I am a mild basher. In my opinion the revo looks much much better. And i can perform the zip tie , limiting strap mod. I think it will be fine then. What do u think?
@Todd_G_FPV3 жыл бұрын
@@gourobkundu2173 worth a shot man! At the end of the day its about what puts a smile on your face. For me its my xmaxx but I do enjoy running my other cars as well
@donniemarks942 жыл бұрын
After a hand full of runs with my lil revo I noticed the front diff slips a bit when turning the wheels by hand, easy runs to nothing crazy, no jumping or crashing
@RCKnockout2 жыл бұрын
If it hasn’t stripped yet you might be able to shim it….I recommend the upgrade though…..the stock diffs are pretty weak
@donniemarks942 жыл бұрын
@@RCKnockout yea that’s exactly what I was thinking because it does work properly once it catches the gear lol
@RCKnockout2 жыл бұрын
@@donniemarks94 yeah it’s probably just a very loose gear mesh
@jordanrutherford17662 жыл бұрын
Same problem here. Can strip a stock diff without even trying. I love my mini summit but hate the weak diffs.
@RCKnockout2 жыл бұрын
Yeah I’ve had no issues since installing these….they’re expensive but they definitely seem to be holding up
@jordanrutherford17662 жыл бұрын
@@RCKnockout I will definitely have to pick some up I would love to worry less when moderately - light bashing. New to the channel and I can't wait to check out all the 1/10 Summit vids! I bought a second hand 1/10 Summit with a castle 2200kv motor run on 6S. Got huge 4.0 Rox Loxs.Its my first big rc and I love it. Subscribed!
@RCKnockout2 жыл бұрын
@@jordanrutherford1766 should hold up with these diffs In it…..appreciate it man! Yeah the 1/10 summit is definitely a cool machine!!
@edwardredmond64763 жыл бұрын
I have the same diffs and I put 20 million in my diffs and a slipper elementer and shims for the diff and all hardened transmission gears. Bullet proof and supper amazing to drive now you can just shim the stock diffs and you will be good for a long time. But I went over kill with my car . But shims are a must it should be the first thing you do out of the box . And servo. Lol the stock is junk 😂🤣
@RCKnockout3 жыл бұрын
Yeah I found out pretty quick that the stock Servo was garbage lol 😂
@alexcrowder16732 жыл бұрын
My diffs obliterated themselves during my 1st run with my new motor even though i shimmed them. To be fair its a 2850kv 3670 sized can running 4s lol. Its meant for a car literally twice the length of the revo. So I got the hot racing diffs and hardened gears like 6 months ago, but i have been dreading installing them because i have the t bone racing chassis and its a pain in the butt to line it back up after taking it off lol. There are these little metal pieces that you basically have to ballance upright, all at the same time and then somehow stop them from tipping over while you install the skidplate. Its a nightmare lol. Its just so many extra steps and replacing the diffs is kind of a pain as it is lol. I basically have to disassemble the whole thing to get in there as it is.
@Lukksia2 ай бұрын
anyone seeing this make sure you still shim this diff. paid 70 dollars for it and stripped it because I didn't
@danielitaliano453111 ай бұрын
Elecoidales son mejores como los de los autos reales espero que te funcione mejor pasa que si le pones 11 volt no aguanta.
@DivineSadist Жыл бұрын
Shimmed my diffs and theyve been great. Only running 2s. Considering replacing my rear with a helical, seems redundant and not cost effective to have one in the fron, hows the handling with the front helical installed? Im curious, but i feel like it would be worse.
@RCKnockout Жыл бұрын
I haven’t noticed any handling difference with the helical gears
@wootwootjr2 жыл бұрын
People complain about working on arrmas, whole bunch of different screws to access anything. Just to get to the diff on this thing, you HAVE to disassemble the whole front end basically... looks like a nightmare
@RCKnockout2 жыл бұрын
It is a nightmare….this chassis as well as the 1/10 revo and Summit chassis are the worst Traxxas chassis to work on
@ekimusman2 Жыл бұрын
hey, man. what noticeable differences did you take away when running with the spiral diffs? worth it? how'd they run with the center diff?
@RCKnockout Жыл бұрын
They hold up well….I was constantly stripping the stock ones….they work well with the center diff too
@sebbbou54552 жыл бұрын
Hi great video! I just bought this diff and i’m wondering if i still to shim this diff like the stock ones??
@RCKnockout2 жыл бұрын
It’s not a bad idea to at least try to…..mine was pretty tight and didn’t have much slop in it though
@sebbbou54552 жыл бұрын
@@RCKnockout which oil grade you recomend the best?
@RCKnockout2 жыл бұрын
@@sebbbou5455 I think I just put 30wt for the front and rear
@roger03903 жыл бұрын
I like your video and I am thinking of upgading because of it but I dont see a follow up unless I missed it I have had to replace so many of those normal gears you said this thing should be indestruckdable did it live up to that???????????????????????? Thanks Mark
@RCKnockout3 жыл бұрын
I haven’t had an update video yet but so far so good. It’s still going strong after 4-5 runs
@RFHX2_6.03 жыл бұрын
Has the diff fluid leaked out? That’s odd how the HR diff doesn’t have the recess to accommodate the larger O-rings to seal the diff fluid in.
@RCKnockout3 жыл бұрын
No I don’t think it’s leaked out as of yet anyway
@fry98472 жыл бұрын
I know this was a year ago so that hopefully means that you've tested them did they work well if so I will be putting them in my mini
@RCKnockout2 жыл бұрын
Yeah they’re still holding up really well
@SpeedSyko3 жыл бұрын
I bought this car when they first came out. It was a insane tank on 3 s never broke it. I just bought one, broke a shaft in under 1 minute. I’m selling it. Now the diffs go? There cheeping out on quality big time. Sad.
@RCKnockout3 жыл бұрын
So you had an OG mini e revo brushless?
@SpeedSyko3 жыл бұрын
@@RCKnockout yes, sold it. I have a bin full of traxxas1/16 parts. I should be able to make it work.
@RCKnockout3 жыл бұрын
@@SpeedSyko so you think the diffs in the original 1/16 erevo are better than the new erevos?
@SpeedSyko3 жыл бұрын
@@RCKnockout it seemed to be, I remember ripping my first vxl on 3s hard. I never replaced an axle. Maybe it was bad luck? I’m modifying it so it won’t happen again. I had to do mip axles in my stampede 4x4. If you have any tricks, let me know. Thanks!
@RCKnockout3 жыл бұрын
@@SpeedSyko actually I think I’ve only broken one driveshaft on my 1/16 e revo. It’s just the diffs that’s been the problem for me. I’m not really sure how to make a 1/16 Revo into an ultimate basher? I’m sure it’s possible though
@ianb.perunal65962 ай бұрын
I got two for 20 on ebay sm selling them ten a piece there usually 28
@RCKnockout2 ай бұрын
That’s a good deal….they’re typically over $40 for one
@saiiiiiii13 жыл бұрын
So 4 months later? Buy again or is the regular Traxxas good enough?
@RCKnockout3 жыл бұрын
It’s held up fine so far. I don’t use this rc a ton though
@alexcrowder16733 жыл бұрын
Im interested as well if anyone has long term experience with this part. Especially in high power setups.
@RCshowmen2 жыл бұрын
You took the wrong screws off the shocks initially and took more apart than you needed to. Maybe it’s me coming from WW2 watch restoration but these screws are reasonably sized. If you want to see tiny work on a woman’s watch from the 1940s.
@RCKnockout2 жыл бұрын
Didn’t notice…..thanks for letting me know 😉
@johngantner93143 жыл бұрын
hows it run? Thats alot of work
@RCKnockout3 жыл бұрын
I ran it once on road so I’ve yet to bash it. Time will tell I guess
@chanceRc Жыл бұрын
How have they held up so far
@RCKnockout Жыл бұрын
They’ve held up good
@chanceRc Жыл бұрын
@@RCKnockout sweet thanks for the reply. Stock ones last me about 4 months running 3 s and getting old or just go down to 2s
@RCKnockout Жыл бұрын
@@chanceRc no problem! The stock ones aren’t great
@jeffkarr39363 жыл бұрын
Any idea if these would fit in a latrax teton or rally?
@RCKnockout3 жыл бұрын
I’m pretty sure it only fits the Traxxas 1/16 scale vehicles. I believe the latrax is 1/18 scale
@Widflyinghigh3 жыл бұрын
Not a chance. I have both. Completely different diffs.
@jeffkarr39363 жыл бұрын
😭
@Todd_G_FPV3 жыл бұрын
No they won't I have rally Teton and merv and they don't fit
@Wotup723 жыл бұрын
Why would you buy this traxxas? Need answers.
@RCKnockout3 жыл бұрын
Thought it would be a nice little trick machine. It’s been more like a pain in the butt lol 😂
@nitrogas57193 жыл бұрын
@@RCKnockout same lol, I said screw it and sold it 😂
@RCKnockout3 жыл бұрын
@@nitrogas5719 I got too much money in it at this point to sell it. Hopefully the diffs hold up 🤞
@Gta2O133 жыл бұрын
Should of replaced the bearings also
@ethankirkpatrick60393 жыл бұрын
Lmao I just dropped 100 on two machines aluminum axles for my 1/24 axial scx24
@RCKnockout3 жыл бұрын
Rc isn’t cheap lol 😂
@daytonwhittle75923 жыл бұрын
Neverhad aroble i had 3
@imbadatthisgame16812 жыл бұрын
These are 85$ usd now
@RCKnockout2 жыл бұрын
Cheaper than what it was…..but that’s still kinda expensive
@jessecoleman41403 жыл бұрын
Bought these gears and stripped both in the first day I got them. Waste of money
@RCKnockout3 жыл бұрын
Bummer. Did you shim them?
@jessecoleman41403 жыл бұрын
@@RCKnockout unfortunately they never sent them so I couldn't. i messaged them in hopes of a refund or replacement and I ordered shims from another website. hopefully I get new ones like you said they weren't cheap
@RCKnockout3 жыл бұрын
@@jessecoleman4140 that’s highly unfortunate. Best of luck getting it back up and running 🤞